dc calibrator for sale, brand-new and used.

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

This is a Tegam Weinschel VM7 Attenuator and Signal Calibrator. The VM-7 offers a wide dynamic range of 127 dB when using the synthesized signal sources. Single step measurements are possible over the full dynamic range because the receiver is not encumbered by mechanically switched range changes.

DESCRIPTION: Number of Channels 4 Number of Digitizers 4 Max. Sample Rate Window 2 ms @ 4 GS/s in single-shot mode Sensitivity 2 mV/div to 1V/div, 50 , fully variable 2 mV/div to 10 V/div, 1 M, fully variable Offset Range 2.00 to 4.99 mV/div: ±400 mV 5.00 to 99 mV/div: ±1 V 0.1 to 0.99 V/div: ±10 V

Tektronix 1780R Video Measurement Set

DESCRIPTION The Wizard is a microprocessor controlled, digital baseband FM modulation monitor/analyzer that precisely measures peak modulation, peaks per minute, average peak modulation, modulation density, and more. The Wizard can operate with an existing modulation monitor, or it can be configured to replace an existing baseband modulation monitor. The Wizard Software (included with The Wizard) and an IBM compatible personal computer enable real-time graphing, logging, and remote operation.

The Model CVC is a portable calibrator designed to meet the requirements of field calibration, testing, and troubleshooting of transducers, transmitters, actuators, and other process and control devices. The Model CVC features a large, 0.59” (15 mm), LCD numerical display, with blue backlighting for use in dimly lit areas. Powered by a readily available standard 9V battery, it also comes with a 120V AC plug-in power supply for bench-top use.

You are bidding on a functioning Precision DC-AC Calibrator for using on either oscilloscopes or multimeters for either repair or calibration. Serial Number is 829. Along with this unit comes a power cord and an hard copy of the manufacture's instruction manual.

PIE 535PIECAL 4-20/10-50 mA Dual Range Loop Calibrator New - Factory Authorized Distributor - Factory Warranty True +/- 0.025% of reading Read and Source 0.000 to 50.000 mA Display current or -25.00 to 125.00% of 4-20mA or 10-50mA Bar graph displays % of 4-20mA or 10-50 mA Bar graph displays % of 4-20mA or 10-50 mA The Practical Instrument Electronics (PIE) 535 brings you the features of the original Model 532 for 10-50 milliamp process loops.

The UNI-T UT713 Handheld Thermocouple Calibrator is a precision tool for measuring and calibrating thermocouples. The UNI-T UT713 Thermocouple Calibrator can be used for output and measurement of DC voltage and 8 different types of thermocouples. The calibrator is a high accuracy calibration and measurement instrument with an easy to hold shape and large LCD display.

TEMP 500?C/932?F TEMPERATURE 1PC CEM THERMOMETER IR INFRARED CALIBRATOR BX-500

YOU ARE BIDDING ON A FLUKE 715 MA/VOLT CALIBRATOR. THIS CALIBRATOR IS ABLE TO SOURCE/MEASURE DC MA WITH OR WITHOUT LOOP POWER. IT IS ALSO CAPABLE OF MEASURING MV/V AND SOURCING MV/V THIS DEVICE HAS A USER SELECTABLE 250 OHM HART RESISTOR TO FACILITATE USE WITH HART COMMUNICATION DEVICES.

IR INFRARED CEM TEMP THERMOMETER 500?C/932?F 1PC CALIBRATOR TEMPERATURE BX-500

Note: shipped by express mail service Features The fast, one-handed tool for loop checks. Just click to calibrate. This feature-rich solution combines the best features push-button and knob-base loop calibrator and offers: Large display and simple, quick-click interface for easy one-handed operation.

FEATURES The Multifunction Process Calibrator is a powerful, yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter.

FEATURES The Multifunction Process Calibrator is a powerful, yet easy-to-use field calibrator. Use the measure and source functions to test and calibrate almost any process parameter. Loop Power Voltage: 24V Accuracy: 10% Maximum Current: 24 mA, Short-circuit protection In addition to the functions listed in Table 1,the calibrator also has the following characteristics: 1.A split-screen display.

This meter is a portable and specialized process verification instrument, which presents as a digital verification meter that has both digital multimeter and signal source function, and can measure and output signal simultaneously. Its large liquid crystal digital display can show and measure the output signal value at the same time, and it is equipped with backlight which makes the user easier to read the value.

Note: we'll ship this item via express mail service to USA, Canada, Australia, New Zealand, Ireland, Austria, Belgium, Denmark, Germany, France, Finland, Luxemburg, Malta, Norway, Sweden, Swiss, Spain, Italy, UK, Japan, Korea,Thailand, Malaysia, Indonesia, Philippine, Singapore. For other countries, we will ship it via registered air mail of post.