dc calibrator for sale, brand-new and used.

Up for Sell is a Druck DPI 603 Pressure Calibrator 300 PSI The cost effective DPI 603, which extends the GE range of rugged portable battery powered pressure calibrators, has standard ranges of -15 psig to 15 psi, 30 psi, 150 psi or 300 psi (-1 to 1 barg, 2 bar, 10 bar or 20 bar) with an accuracy of 0.075%. Designed for use in remote locations where AC power is not available, the DPI 603 enables pressure instrumentation to be serviced and calibrated.

Features: 1.

Features: 1. Multimeter and process signal source 2in1. 2.

New Page 1 Fluke 707 Loop Calibrator - New !!! Attention Buyer : Free shipping to anywhere in the lower 48

Valhalla Scientific 2555A AC-DC Current Calibrator This is in good physical condition and works fine.

Note: we'll ship this item via Epacket to US, usually the delivery time is about 3 weeks; For other countries, we'll ship it via re

DC Current: Two ranges ±10nA to ±100mAdc High Resolution: ±0.0001% (1ppm) of both ranges: Minimum selectable setting: 10nA DC Voltage: 10V, ±11.11110Vdc; 100mV, ±111.1110mVdc; 10mV, ±11.11110mVdc:?Resolution (1ppm): 10V, 10AµV; 100mV, 0.1AµV; 10mV, 0.01AµV

100 turns calibration coil It can be useful to calibrate small clamps that cannot fit into the larger Fluke 5500A/COIL or also used to measure small current into a circuit. It can be added to a pc board to easily measure low current into a circuit. You a can either measure AC or DC current if you use an AC / DC clamp.

Altek 134-2 PocketCal mA Calibrator New - Factory Warranty Basic Milliamp Functions Source 0.00 to 24.00 mA or -25.0 to 125.0%, read mA or percent to 24.00 mA, simulate 2-wire transmitters, power and measure 2-wire transmitters. Basic Accuracy A±( 0.08% of 24 mA Span + 1 LSD

(On Products over $75) Extech PRC10 Current Calibrator/Meter New - Factory Authorized Distributor - Factory Warranty Palm-sized double molded housing and large dot-matrix digital backlit LCD Measures DC process signals Standard

(On Products over $75) Extech PRC15 Current & Voltage Calibrator/Meter New - Factory Authorized Distributor - Factory Warranty Palm-sized double molded housing and large dot-matrix digital backlit LCD Measures DC process signals

(On Products over $75) Extech PRC30 Multifunction Process Calibrator/Meter New - Factory Authorized Distributor - Factory Warranty Measures DC process signals Up to five user adjustable calibration presets 24 V Loop Power

Electronic Development Corporation EDC 2901DC Differential Voltmeter / CalibratorProduces and output as shown. No other testing performed.Sold As-Is with no returns

Altek 422 14-Type Universal Thermocouple Calibrator New - Factory Warranty Calibrate All Your T/C Inputs Alarms, recorders, controllers and indicators with 0.1A, resolution. Built-In T/C Thermometer Connect the T/C and accurately read the temperature. Instantly recall the m

Altek 334A Process Loop Calibrator New - Factory Authorized Distributor - Factory Warranty All 4 to 20 mA Loop Functions Source 0.00 to 24.00 mA or -25.0 to 125.0% read mA or percent to 52.00 mA, simulate 2-wire transmitters, measure -99.99 to 99.99 volts DC pow

Extech 407766 Sound Level Calibrator with 94 dB or 114 dB Output New in Box - Factory Warranty Extech

Note: USB function is not available. Multifunction Temperature Calibrator (referred to as “The Calibrator”)

Electronic Development Corporation Programmable DC Voltage Calibrator. Model 501-J. Comes with power cord, Output connector and Program connectors.