WE ARE SELLING A GEAR MOTOR REVERSIBLE MODEL# D0824-454 MADE BY ORIENTAL MOTOR 115 VOLTS AC 60HZ 0.85AMPS APPROX 180 RPMS THIS MOTOR IS REVERSIBLE AND REQURES A 12UF CAPACITOR ( NOT iNCLUDED) TO OPERATE 4 screw holes on the face plate measure 2-7/8 inches apart(74mm) the gear box measures 3-1/2 X 3-1/2 inches square the motor is 5-3/4 inches long and the shaft measures 1/2 inches by 1 inch long the gear measure 1-1/2 inch Dia and has 17 sprocketts All sales and items are "as is" and final.
Pictures are of actual item you will receive. Technical Specs Item Direct Drive Blower Motor Motor Application HVAC/R Motor Sub Application Direct Dr Fan/Blower Motor Type PSC Enclosure Open Air-Over HP1/2 Nameplate RPM1075 Voltage115
The offer is for a water-cooling high speed high precision spindle motor 2.2 kw with a VFD inverter for graving/grinding as a set! Dia.80mm*L:210mm(80*210mm) 220V 7.5A 400HZ 6000-24000RPM Collet: ER20 Runout off: less than 0.005mm
Globe Industries 230A449 AC 115v Motor 1.0 RPM Hysteresis NOS Brand new motor we have two available. Purchased for industrial plant as spare but never installed. Shaft is 8 mm dia (.315") mounting plate is 1 3/4" square with 4 - 1/8" mounting
STEPPER MOTOR Lin Engineering 5709M-01 Nema size 23, body length 2", 175 on/oz holding torque 0.9 deg/step, bipolar (4wire), 6.5 Ohms, 1.1Amps, single shaft 0.252" dia x 3/4"long as shown. (CRF1)
The offer is for a water-cooling high speed high precision spindle motor 3 kw with a VFD inverter for graving/grinding as a set! Dia.100mm*L:250mm(100*250mm) 220V 10A 400HZ 6000-24000RPM Collet: ER20 Runout off: less than 0.005mm
REMOVED FROM WORKING MACHINE. The motor has a straight shaft that is .750 in dia with a key and 1.6 long. The bolt hole pattern is 3.2 C to C and has a 3.740 aligning hub on the mounting end if motor.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.