US $997.50
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Manufacturer | EARTH CHAIN |
Directions
Similar products from Other Workholding Tools
12 X 12 X 20 SQUARE WORK HOLDING FIXTURE,TOMBSTONE CNC HORIZONTAL MACHING CENTER
Flanged Nut 7/8-9 Flange Nuts Black Oxide Case Harden
ROHM 88065 DRIVING DISC & CENTER
Glaston Bavelloni Diamond Wheel 21915000005 895885 80 M1070 U12.5 150x16x22
Precision 8-200mm Boring Head System+8pcs Borin Bar +R8 Milling ToolHolder Set
Precision 8-200mm Boring Head System+8pcs Borin Bar +BT30 M12 ToolHolder Set
Precision 8-200mm Boring Head System+8pcs Borin Bar +NT40 M16 ToolHolder Set
Hilma-Rumheld Hydraulic Hollow piston Single Acting T-Slot Clamping Cylinder
5 - Kipp Pull Knob M12 x 1.5 Indexing Plungers, Non-Locking, 03090-1206, QTY. 5
Dodge 1610x1-1/4" Taper Lock Bushing with 3/8" Keyway. Lot of 2
MAPCO 1 X 2-1/2 PULL DOWELS 5PCS (D201-5)
MAPCO 1 X 3 PULL DOWELS 5PCS (D202-5)
MAPCO 1 X 3-1/2 PULL DOWELS 5PCS (D203-5)
MAPCO 3/4 X 1 PULL DOWELS 12PCS (D188-12)
MAPCO 3/4 X 1-1/2 PULL DOWELS 10PCS (D189-10)
MAPCO 3/4 X 1-3/4 PULL DOWELS 10PCS (D190-10)
MAPCO 3/4 X 2 PULL DOWELS 10PCS (D192-10)
MAPCO 3/4 X 2-1/2 PULL DOWELS 9PCS (D196-9)
MAPCO 3/4 X 2-1/4 PULL DOWELS 6PCS (D194-6)
MAPCO 3/4 X 2-3/4 PULL DOWELS 10PCS (D197-10)
People who viewed this item also vieved
LOT of (30) R-S-B SOUTH BEND 5C COLLETS, METRIC: 2mm-27mm
SANDVIK TAP DRIVER COLLET 360206-17.45-687
JACOBS RUBBER FLEX LATHE COLLET SET 1/16-5/8
Used 30" x 21.25" x 44" tall tombstone
Kreg 30" Aluminum Workshop Jig and Miter Fixture Mounting Bar - Part # KMS7303
SWIVEL MACHINE VISE BASE FOR MILL OR VMC 6-3/8" CENTER TO CENTER
Bessey SQ8 8-Inch Super Quick All Steel Sliding Arm Clamp
Samsons Grip 408 Machinist "C" Clamps Pair of 8" Opening Forged Steel USA!
TEE SLOT NUTS, 1/2"-13 THREAD, USED IN GOOD CONDITION, 3.78 LBS.
6 1/4" 3 Jaw Self Centering Poland Lathe Chuck With 2 1/4" rear thread 8ZD
Kitagawa B208 8" CNC Lathe Chuck
GOOD USED 1/4" SQ ENGINE LATHE CHUCK KEY 6" T Handle ATLAS BUCK CRAFTSMAN UNION
Bridgeport Milling Vise With Jaws (Inv.33315)
Bridgeport Milling Vise With Jaws (Inv.33314)
WILTON MACHINIST BULLET VISE WITH SWIVEL BASE
BISON Ultra Precision Adjustable Heavy Duty Live Center Point Length : 2.44''
ROYAL ROYAL Dead Center Carbide-Tipped Point POINT DIAMETER: 0.700''
ROYAL Versa-Turn Live Center - Overall Length : 9-13/16'' Taper: 5 MT
25" Troyke T-slotted Rotary Table Model BH-25
4" HORIZONTAL & VERTICAL ROTARY TABLE PRIME QUALITY 4 INCH HV ROTARY TABLE
Peiseler PT 160 Indexing Table w/ Tailstock, 4 x 90 degree, Mfg'd 1996, Used
1.25” x 1.25” x 1.625” Vee Block
1.375” x 1.375” x 1.625” Vee Block
Lot Of 2 SANDVIK COROMANT C6-391.14-20 060 Collet Chuck Adapters
Techniks Cat/ER Collet Chuck, Model #SYIC-22255 N, Cat 40 x ER32-4", New!
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies