US $199.99
Condition: |
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully
operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
...
|
Brand | Hilma-Rumheld |
Country of Manufacture | Germany | ||
Model | 2135-2101 |
Directions
Similar products from Other Workholding Tools
LOT OF CAST IRON EYE BRACKETS, 2"
12 X 12 X 20 SQUARE WORK HOLDING FIXTURE,TOMBSTONE CNC HORIZONTAL MACHING CENTER
Flanged Nut 7/8-9 Flange Nuts Black Oxide Case Harden
ROHM 88065 DRIVING DISC & CENTER
Glaston Bavelloni Diamond Wheel 21915000005 895885 80 M1070 U12.5 150x16x22
Precision 8-200mm Boring Head System+8pcs Borin Bar +R8 Milling ToolHolder Set
Precision 8-200mm Boring Head System+8pcs Borin Bar +BT30 M12 ToolHolder Set
Precision 8-200mm Boring Head System+8pcs Borin Bar +NT40 M16 ToolHolder Set
5 - Kipp Pull Knob M12 x 1.5 Indexing Plungers, Non-Locking, 03090-1206, QTY. 5
Dodge 1610x1-1/4" Taper Lock Bushing with 3/8" Keyway. Lot of 2
EARTH CHAIN EZ-LIFT ELM-600 LIFTING MAGNET RATED 1320LB
MAPCO 1 X 2-1/2 PULL DOWELS 5PCS (D201-5)
MAPCO 1 X 3 PULL DOWELS 5PCS (D202-5)
MAPCO 1 X 3-1/2 PULL DOWELS 5PCS (D203-5)
MAPCO 3/4 X 1 PULL DOWELS 12PCS (D188-12)
MAPCO 3/4 X 1-1/2 PULL DOWELS 10PCS (D189-10)
MAPCO 3/4 X 1-3/4 PULL DOWELS 10PCS (D190-10)
MAPCO 3/4 X 2 PULL DOWELS 10PCS (D192-10)
People who viewed this item also vieved
KENNAMETAL ERICKSON COLLET 19/32 UNUSED FROM OLD STOCK. SB6
SANDVIK TAP DRIVER COLLET 22098-20.32-.800
LOT of (30) R-S-B SOUTH BEND 5C COLLETS, METRIC: 2mm-27mm
Machinists Suburban Sine Plate In Box 12 x 6 x 2 5/8
Used 30" x 21.25" x 44" tall tombstone
LARGE USED MACHINIST PARALLEL CLAMP 6" Jaws 4" Capacity metal work holding tool
Pair 6” Deep Kant Twist Clamps
Bessey SQ8 8-Inch Super Quick All Steel Sliding Arm Clamp
21" WARNER & SWASEY, 4-JAW CHUCK, M-1614-9, T & G JAWS, 6.5" HOLE, A2-11
27.5" 4-JAW MANUAL CHUCK, TM, 10.25" HOLE, ONE PIECE JAWS, A2-11
6 1/4" 3 Jaw Self Centering Poland Lathe Chuck With 2 1/4" rear thread 8ZD
WILTON Combination VISE, C0, 3 1/2' JAWS, PIPE JAWS, IN EXCELLENT CONDITION
Ridgid F Series Forged Steel Bench Swivel Vise 6" Jaw Width Machinist
Bridgeport Milling Vise With Jaws (Inv.33315)
ROYAL Value-Turn Live Center Point Length : 7/8'' Overall Length : 5-7/8''
BISON Ultra Precision Adjustable Heavy Duty Live Center Point Length : 2.44''
ROYAL ROYAL Dead Center Carbide-Tipped Point POINT DIAMETER: 0.700''
large Indexing Dividing Head L-W Chuck Co. Toledo Ohio USA WITH CHUCK
25" Troyke T-slotted Rotary Table Model BH-25
4" HORIZONTAL & VERTICAL ROTARY TABLE PRIME QUALITY 4 INCH HV ROTARY TABLE
MACHINIST LATHE MILL Machninst Large Ground Set Up Block Fixture Step Block
MAGNETIC V BLOCK, 2 SIDED - 1" & 2"
Hertel HCV50ER32400 Collet Chuck Series ER-32
B&V collet chuck 20 MM w/ case
Lot Of 2 SANDVIK COROMANT C6-391.14-20 060 Collet Chuck Adapters
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies