eye nuts for sale, brand-new and used.

These are NEW Lorlin Panel Mount Selector Switches 4-Position 3-Pole Single Deck Solder eye terminals Mounting nuts included Qty - 2 Shipping Information: I will comb

Indusco 316 Steel Eyebolt, Not For Lifting, Galvanized Finish, 8" Length, Threads, Imported

Indusco Steel Eyebolt, Not For Lifting, Galvanized Finish, 21" Length, Threads, Imported

About us Shipping

THIS IS FOR A 10 PACK 4 GAUGE COPPER RING 1/4 TERMINAL CRIMP CONNECTORS HIGH QUALITY OXYGEN FREE COPPER WE HAVE EVERY TERMINAL/CONNECTOR THAT YOU COULD WANT IN OUR EBAY STORE UNINSULATED COPPER VINYL NYLON BULLET BUTT RING SPADE T TAPS SCOTCH LOCKS CLOSE END CAPS WIRE NUTS ETC. I HAVE POWER AND GROUND WIRE IN 0,4,6,8,10,12,14,16,18,20,22 AND 24 GAUGE PLEASE VISIT MY STORE FOR ALL YOUR WIRING NEEDS PLUS WAY MORE CONTACT ME FOR BULK ORDERS DONT FORGET TO ADD ME TO YOUR FAVORITE SELLERS

THIS IS FOR A 10 PACK 8 GAUGE COPPER RING 3/8 TERMINAL CRIMP CONNECTORS HIGH QUALITY OXYGEN FREE COPPER WE HAVE EVERY TERMINAL/CONNECTOR THAT YOU COULD WANT IN OUR EBAY STORE UNINSULATED COPPER VINYL NYLON BULLET BUTT RING SPADE T TAPS SCOTCH LOCKS CLOSE END CAPS WIRE NUTS ETC. I HAVE POWER AND GROUND WIRE IN 0,4,6,8,10,12,14,16,18,20,22 AND 24 GAUGE PLEASE VISIT MY STORE FOR ALL YOUR WIRING NEEDS PLUS WAY MORE CONTACT ME FOR BULK ORDERS DONT FORGET TO ADD ME TO YOUR FAVORITE SELLERS

short lift eye  with shoulder  3 3/4 from shoulder up     5 1/2 long overall lenth     NUTS NOT INCLUDED 20 mm  X 2.50  hole measures 1 1/8",  across outside of ring 2"   ring thickness approx 7/16 "  metric treads 20 mm 2.50 pitch   several of these available        MORE STUFF LIKE THIS COMING                             COMBINE SHIPPING AVAILABLE        200 available          pay 6.00  shipping on the first only,  the rest ship free    weight 3/4 lb ea.      Check out my other items!

2 Steel Lifting Eye Nuts have been in my toolbox, but have never been used. Has some slight surface rust as seen in pics. Thread size- 3/4-10 Thread length- 3/4" Eye inside diameter- 1 1/2" Eye outside diameter- 2 1/2" Overall height- 3" Stamped on the eye is K N-1 A105

 

Hi Folks! Today for your consideration, I’m offering a working, recapped Sprague TO-4 Capacitor-Resistor Analyzer. The tester reliably and reasonably accurately measures the capacitances of all types of capacitors from around 10 pF-2000 uF and resistances from 2.5 Ohms to 25 Meg Ohms.

This appears to be an early Peck, Stow & Wilcox No. 8 forged steel wing divider from East Berlin, Conn. with good snug brass and steel pivot joint.

This appears to be an vintage Sargent & Co. No. 8 steel wing divider with a good snug brass and steel pivot joint.

OMEGA ROTAMETER - 65 mm flowtube aluminum frame -16.77 cc/mi air 0.28 cc/min water

1/4" x 4” NUT EYE BOLT (Shoulder Pattern). Rated capacity considers a straight, zero degree, pull. Pulling at an angle can reduce the rated capacity significantly.

*************Buy 2 get 1 FREE************** Buy 2 cd titles through the auction or fixed price format listings and during the check-out process send a message to request a free CD title of your choice. ***************************************** Want to Buy-it-now instead of waiting for this auction listing to end?

2- 1 " KEN FORGED STEEL LIFTING EYES with Shoulders Ring ID 1 3/4" OD 3 5/8" bolt 1"-8 x 2 1/2" long 2- 1" nuts