flange lock for sale, brand-new and used.

This shank is 4-1/8" long measured from the end of the threading to the end where the faucet attaches. The shank comes with a black plastic flange on the front and a compression ring on the back. Forged brass lock nut.

You are bidding on a lot of 3 4' x 4' Halliday roof hatches. These hatches are used but in very good condition. They are made of aluminum.

This item is a lot of 25- 3/8" stainless steel serrated flange nuts. I will answer any questions that you might have. Sorry, no international shipping.

Kegco SHANK4-ASC - All SS Contact 4 1/8" Long Beer Shank with Nipple Assembly - 1/4" I.D. Bore Product Features

Here are some NEW Old Stock Whelen 73 light housings WITH mounting Flange. These are leftover from a lot I bought several years ago. They hold Whelen Twist-Lock style bulbs (strobe or halogen).

Nibco LC-2000-3 4" Lug Style Cast Iron 200 PSI EPDM Lever Lock Butterfly Valve The NIBCO® lug type butterfly valve provides bi-directional dead-end service without a downstream flange, and bubble-tight shutoff at 200 psi. The valve is ideal for commercial and some light industrial process applications, including HVAC and vacuum services, in addition to hot and cold potable water. Features Valve pressure rating 200 psi 225°F continuous and 250°F intermittent service Lug sty

Product is brand new in opened box. Components are still sealed in original shrink packaging. Below is the manufacturer's description.

Description:50pcs M10 Thread Zinc Plated Nut Serrated Hex Flange Nut Non-slip Lock Nut Specifications:Material: IronMaterial grade: Carbon steel 8.8 LevelSurface treatment: Nickle platedThickness:8.6mmExternal Diameter:18.4mmInternal Diameter:13.8mmSpanner sizes: M10=15mm spannerQuantity: 50pcs Features:Nickle plated for improving corrosion resistance.The addition of Nickel Plated can not only increase the wear resistance of produc

Complete generac muffler critical 4 flange. Parts included below. Brand new never used.

1-016-5M60TL15.1610 Ametric® Part Number 674147 SKU No. Steel HTD Timing Pulley with Flange 5M Pitch for a 15 mm Wide HTD Timing Belt 60 Teeth for 1610 Taper Lock Bushing 95.46 mm Pitch Diameter(Dp) 94.32 mm Outside Diameter(De) 75 mm Hub Diameter(Dm) 22 mm Face(F) 25 mm Length Through Bore(L) 3 mm Hub Projection(R) 10F/S Construction Price listed is for one Timing Pulley without bushing. This is an Original unused Ametric® product directly from the manufacturer American Metric Corporation.

Amphenol FCI Berg QTY 4 CONNECTOR HEADER SHROUDED 34POS DUAL ROW VERTICAL GOLD CONTACTS MFG PN 71918-134LF Latch Lock Datasheets

HitchSafe HS7000 Key Vault Converts Receiver into C