flange lock for sale, brand-new and used.

SKF MB 5 Lockwasher, Steel, 25mm Bore, 1.25mm Thick

The Lock-N-Reload is a simple device that will allow you to backfill your 50ml PVS Impression Cartridges. You will save your office hundreds of dollars every year. Eliminate leftover material waste by transferring unused, good impression material from partially filled tubes into one tube.

Preformed Line Products FIBERLIGN Splice Case

This is an Auction for a new Parker Series MPRM Flange Mount Rod locking Pneumatic Cylinder, Part# 32 CJMPRMR14MC 70.00. The Series MPRL incorporates a powerful piston – rod locking device, which clamps the piston rod and locks it in position. The locking device is of the air/spring activated type and is integrated into the front (head) cover of the cylinder.

4-1/2" SJS™ High-Power Angle GrinderModel 9564CV SJS™ Mechan

FAG MB14 Lockwasher, Metric, 70mm ID, 98mm OD, 1.5mm Thick

SKF MB 5 Lockwasher, Steel, 25mm Bore, 1.25mm Thick Bore Diameter String: 25 mm | Item Thickness String: 1.25 mm This SKF MB or W series steel lock washer with interior and exterior tabs is suitable for use in locating a bearing on a shaft or adapter sleeve. The washer has an interior tab that locks into the shaft keyway and exterior tabs that lock the nut (sold separately) in position when one of the washer tabs is bent over into one of the slots around the circumference of the nut.

New never installed KNOX BOX 3200 Series, Surface Mount, with Hinged Door. Original cost is $308.00 Key is not included, nor is it necessary. The Fire Department has the key, ONLY THE FIRE DEPARTMENT.

Nibco LC-2000-3 4" Lug Style Cast Iron 200 PSI EPDM Lever Lock Butterfly Valve The NIBCO® lug type butterfly valve provides bi-directional dead-end service without a downstream flange, and bubble-tight shutoff at 200 psi. The valve is ideal for commercial and some light industrial process applications, including HVAC and vacuum services, in addition to hot and cold potable water. Features Valve pressure rating 200 psi 225°F continuous and 250°F intermittent service Lug sty

Kegco SHANK4-ASC - All SS Contact 4 1/8" Long Beer Shank with Nipple Assembly - 1/4" I.D. Bore Product Features

Miget devices with a NEMA configuration ML1. This is a stainless steel flange mount receptacle. The value is 15 amp at 125 volt.

Set of 6 NOS Hubbell Twist-Lock Flange mount Inlets rated at 30A 250V.

*** NEW & ORIGINAL *** 1/PKG Datasheets 787653 CHAMP Series I Appl Spec Product Photos 787653-2 3D Model