flared tube for sale, brand-new and used.

BUILD YOUR OWN STILL This is a 2" diameter 10" long Copper Pipe professionally flared on one end to fit a 2" sanitary pipe connection or sanke beer keg type connection This column is not be connected directly to any keg or boiler that has not been properly converted and equipped with proper safety pressure relief valves This is not a complete column.

This is a 2" diameter copper pot style distilling column that will fit a sanke style beer keg connection or 2" sanitary pipe connection This column is made with copper and lead free solder. The liebig condenser arm is adjustable and can be removed for storage and shipping. The condenser arm is 1/2" diameter with a 3/4" diameter water jacket over it.

BUILD YOUR OWN STILL This is a 2" diameter 13-3/8" long Copper Pipe professionally flared on one end to fit any sanke style beer keg type connection or 2" sanitary pipe connection. This is the same as our 12" Column but instead of wasting and cutting off the little bit of extra pipe we left on. This is not a complete column.

BUILD YOUR OWN STILL This is a 2" diameter 24" long Copper Column Extension Pipe professionally flared on both ends tofit a sanke style beer keg connection or 2" sanitary pipe connectionThis Pipe will extend the length of you pot still so it can be used as a reflux still.

BUILD YOUR OWN STILL This is a 2" diameter 12" long Copper Pipe professionally flared on one end to fit a 2" sanitary pipe connection or sanke beer keg type connection This column is not be connected directly to any keg or boiler that has not been properly converted and equipped with proper safety pressure relief valves This is not a complete column.

BUILD YOUR OWN STILL Built in Steam Outlet Column Do It your Self Starter Kit This is a 2" diameter, 10" tall "pot" style distilling column made from copper pipe and professionally flared on one end to fit a boiler with a sanke style beer keg connection or 2" sanitary pipe connection..It can be used alone or it can be attached to a longer pipeand used as the head of a reflux distillation setup.

McCANN'S ASSE 1022 BACKFLOW PREVENTER / CHECK VALVE WITH VENT PORT ABF-1 SERIES MANUFACTURED BY ANDERSON BRASS CO. BRAND NEW FEATURES: WORKING PRESSURES FROM 10-200 PSIG WORKING TEMPERATURE UP TO 130 OF 3/8" FLARED x 3/8" NPT CONNECTIONS 1/4" BARB VENT ATMOSPHERIC PORT FOR VISUAL INDICATION OF PRIMARY CHECK LEAKAGE RELIABLE AND ROBUST DESIGN. MINIMIZED LEAK POINTS PERFORMS AND FUNCTIONS BETTER THAN OTHER DEVICES IN THE MARKET EASY TO INSTALL.

I BOUGHT THESE AND THEY WERE THE WRONG SIZE. THEY ARE 1/2 INCH LONG X 3/16 INCH TUBE SIZE AND THE FLARED PART IS 1/4 INCH. THEY ARE SOLID BRASS.

SquareTrade © AP6.0 Brass Fitting Half Union

SquareTrade © AP6.0 J/B Indu

Used 201-47-01 valve with PFA (-3) nuts, in good working condition, had been used with deionized water. Manually Operated Diaphragm Valves 1/4" Orifice, 2-way, 1/4-turn, Leak Detection Option Port Connection: 1/2" Flaretek® flared tube Nut Option: PFA Nut (-3)

7M45-20D JIC 20 Male x JIC 20 37 BULKHEAD UNION 45 DEGREE FITTING ALUMINUM You are bidding on a 7M45-20D JIC 20 Male x JIC 20 37 BULKHEAD UNION

Lot of 62 each 5/8" Flare x 1/2" Flare Forged Brass Reducing Union Coupling Tube Fitting Condition: New, old stock, may be oxidized. Weight: 1 lb. Description: Lot of 62 each 5/8" Flare x 1/2" Flare Forged Brass Reducing Union Coupling Tube Fitting.

Lot of 5 each 5/8" Flare x 1/2" MPT Forged Brass Male Adapter Tube Fitting Condition: New, old stock, may be oxidized. Weight: 1 lb. Description: Lot of 5 each 5/8" Flare x 1/2" MPT Forged Brass Male Adapter Tube Fitting.

Lot of 3 ea. 3/8" Female Threaded Forged Brass Swivel Union Coupling Tube Fitting Condition: New, old stock, may be oxidized. Weight: 1 lb.