flat bearing for sale, brand-new and used.

DODGE BEARING *NIB* MODEL# 117170 2 KW Item sold *NIB* - no returns - old stock - shows wear/dirt/scratches

DODGE BEARING *NIB* MODEL# 117169 1 - 15/16 KW Item sold *NIB* - no returns - old stock - shows wear/dirt/scratches

You are bidding on one lot of three older chucks by Jacobs. These all come in the original retail box and look unused. There is some spotting, probably due to basement storage.

I got this chuck at a moving sale and have never personally used it. I don't have a way of testing it so I'm selling it as untested. It may or may not work like its supposed to.

UP FOR SALE 1 OF BT30 TAPER JACOBS TAPER MOUNT WITH JACOBS BALL BEARING SUPER CHUCK MODEL 14N. SHIPPING IN A MEDIUM FLAT RATE , BUT WILL HAVE ROOM TO CONSOLIDATE WITH OTHER ITEMS, ASK FOR INVOICE FOR CONSOLIDATING! Taken from service from our only 30 taper machine Howa 320mcn-jc,Which we bought new.

END MILL HOLDER CNC CAT40 1/8" x 2.5" BALANCED TO 20,000 RPM "Shars" Hole Diameter: 1/8" Cat: 40 Drawbar Thread: 5/8" -11 Shank Dia: 1/8" Gage Line to Nose: 2.5" Runout: 0.0001" Balanced: G2.5 20000 RPM Tool holder is balanced to G2.5 20,000 RPM on a HAIMER Tool Dynamic Balancing System from Germany. Balanced tool holder m

NEW!!!

Two Hardened Steel Special Tooling Vises. Each vise has two ball bearings with a flattened surface that fully rotate to accommodate irregular pieces in any vise. The half circle rotates to 15 degrees in either direction.

Ball-Bearing Rotainer 1.75” dia. Post (4.25” long) (r) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 1.75” dia. Post (4,25” long) OD = 2 1/8 LEMPCO 361-1416 Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking.

Ball-Bearing Rotainer for 2” dia. Post(3.25” long)(p) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 2” dia. Post (3.25” long) OD = 2 .5 LAMINA AR1-1613 Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking.

Ball-Bearing Rotainer for 1.5” dia. Post(3.75” long)(o) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 1.5” dia. Post (3.75” long) OD = 1 7/8 PRODUCTO PREC A13-1215 Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking.

Ball-Bearing Rotainer for 1.5” dia. Post(3.75” long)(n) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 1.5” dia. Post (3.75” long) OD = 1 7/8 PRODUCTO PREC A13-1215 Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking.

Ball-Bearing Rotainer for 1.75” dia. Post(4.25” long)(m) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 1.75” dia. Post (4.25” long) OD = 2 1/8 PRODUCTO PREC A13-1417 Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking.

Ball-Bearing Rotainer for 1 3/4” Post(4 3/4” long)(J) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 1 3/4” dia. Post (4 3/4” long) OD = 2 1/8 inches DANLY Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking. The disengagement of the guide post from the bushing by 1/4" at the top of the stroke will allow the ROTAINER® to rotate 360° on the guide post.

Ball-Bearing Rotainer for 2.5” dia. Post(4.5” long)(h) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 2.5” Post (4.5” long) OD = 3 inches LAMINA AR1-2018 Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking. The disengagement of the guide post from the bushing by 1/4" at the top of the stroke will allow the ROTAINER® to rotate 360° on the guide post.

Ball-Bearing Rotainer for 2” dia. Post (5.25” long)(f) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 2” Post (5.25” long) OD = 2.5 inches DANLY 6-1621-822 Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking. The disengagement of the guide post from the bushing by 1/4" at the top of the stroke will allow the ROTAINER® to rotate 360° on the guide post.

Ball-Bearing Rotainer for 2” dia. Post (5.5” long) (e) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 2” Post (5.5” long) OD = 2.5 inches DANLY Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking. The disengagement of the guide post from the bushing by 1/4" at the top of the stroke will allow the ROTAINER® to rotate 360° on the guide post.

Ball-Bearing Rotainer for 2” dia. Post (5.5” long) (d) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 2” Post (5.5” long) OD = 2.5 inches READY 1429294/6-1623-822 Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking. The disengagement of the guide post from the bushing by 1/4" at the top of the stroke will allow the ROTAINER® to rotate 360° on the guide post.

Ball-Bearing Rotainer for 2” dia. Post (7.5” long) (c) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 2” Post (7.5” long) OD = 2.5 inches DANLY Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking. The disengagement of the guide post from the bushing by 1/4" at the top of the stroke will allow the ROTAINER® to rotate 360° on the guide post.