flat bolts for sale, brand-new and used.

Large Flat Rate Box of 430 1/2" Industrial Strength Bolts and Nuts mix of Hex Head and Allen bolts .. 430 total Pieces Even amount bolts and nuts So.. 215 Nuts and 215 Bolts.

THIS LISTING IS FOR Conveyor Accessories 140C 100 pc. Plategrip

******ABSOLUTELY NEW, NEVER USED, WITH ORIGINAL PACKAGING & COVERS, NOT IN BOX****** PLEASE SEE BELOW TO IDENTIFY CONFIGURATION OF PART#'S AFTER 3051C 3051C Coplanar Pressure Transmitters Ordering Information H The Standard offering represents the most common options. The starred options (

Here are 18 pads with 18, 5" long and 1/2" wide bolts with 3 nuts for each. These are new from my Woodland Mill Sawmill. I put my mill on a trailer so don't need the pads.

Offering a NSS PIG M1 Industrial VACUUM Overall it's in good shape with some wear and tear. Mostly it just shows age due to the fadded paint, mostly. The vacuum has been fully tested and works very well, it has tremendous suction and can pick up just about anything.

The Halligan Tactical Entry Tool was designed for use by law enforcement and fire/rescue personnel for accomplishing forcible entry into buildings, vehicles and other locked enclosures. The working ends of the tool will perform a diversity of tasks including prying, pounding, and puncturing the tubular steel handle reduces the overall weight while enhancing leverage, control and balance during use. The mate

Starrett Grind Vise Direct from the toolroom of a (now defunct) Fortune 500 company and never ever used or even unwrapped None better --none cheaper --check my prices against those of others --Why ??? I actually sell stuff Don't like my price ?? Consider MSC @ 1323.00 or $1227 @ Mytoolstore POOP Hardened steel Ground flat, square, and parallel within .000

Approx. 500 5/16-18 x 2 1/2 flat head stainless steel screws.

Tapetech 7" flat box. Rebuilt. Brand new door wiper Brand new Blade housing assembly Brand new skids and clips Brand new blade Brand new wheels and shoulder bolts Nylon spacer in axle for a snug fit.

MOTOR CONDENSER 1/4 850/1 208/230-1-60 Features:• Permanent split capacitor (capacitor not included)• Direct drive, air over• Inherently protected• Class B insulation• Rotation determined viewing end opposite shaft• 1/2” dia. shaft w/single flat except where noted**• Plug type electrical connections• Extended through bolts - .3 to .4 lg. (end opposite shaft only)•

 

Globe TG-10 Turret Tail Stock AND Globe CG-10 Double Tool Cross Slide SET. Taken off of an Atlas/Craftsman TF42 and will work as-is with any 10" Atlas / Craftsman lathe with flat ways. Adaptable to any 12" or larger lathe with an appropriate spacer arrangement.

this was an overstock item. this item is out of original factory warranty. Has been sitting in stock.

NEW MERCOID CONTROL, SERIES PG-3-P1 GAS PRESSURE/DIFFERENTIAL PRESSURE SWITCH,

var itemNumber = window.ebayItemID ?

Condition: New Packaging: Original distressed. Item not effected. 48 FRAME SINGLE SPEED TOTALLY ENCLOSED MOTOR

Navitas Motor Drive Controller 24 - 48V Model: TPM350-12 Controller was pulled from an automated forklift system that was used very little before being put into storage. Item may have slight scuffs and/or scratches and may not have bolts on the terminals. Some Thermal Paste is still present on the bottom.

Navitas Motor Drive Controller 24 - 48V Model: SRE-TPM350-12 Controller was pulled from an automated forklift system that was used very little before being put into storage. Some may have slight scuffs and/or scratches and may not have bolts on the terminals. Some Thermal Paste is still present on the bottoms.