flat bolts for sale, brand-new and used.

Genuine U.S.

Bolts are 5" long; rounded head can accommodate Phillips head or flathead screwdriver. Wide butterfly nuts are 2" - 1" per side. Bolts are 1/4" diameter.

Your purchasing a lot of 12 5/8 bolts with nuts. The bolts measure approximately 2 inches in length. Included are 10 5/8 washers.

This is a 100 pieces total lot of -50 Metric Hex Head Bolts size M6 =6 mm X 16 mm long- threads 1.0 pitch and 8.8 hardness grade . With 50 Nuts to match --Both have washers installed --bolts have 2 a flat and a split lock washer All silver zinc coated for weather resistance These all came from a Gas well rig building company that moved out of Dallas. They only used high quality hardware ,on those rigs.

4” JCB Bolts 5mm Hex Drive

Bought a large amount of vintage hard ware from a local estate auction. This is for 57 of these bolts, and original box as shown in photos. Box is in poor condition, and I have broken it down flat and will be sending it with the bolts.

You are bidding on 4 (four) Socket-head Cap Screw BoltsNon-Magnetic Stainless Steel (I have 3 more bags of 4 each, if you need more of them contact me BEFORE you bid, I could revise the listing)**This auction is for a total of 4 (FOUR) bolts, as shown in the picturesMy measurements: Overall length =

10pcs New Grade 8 3/8-16x3" UNC Hex Head Cap Bolts / Screws 3/8-16 x 3 inches (More pictures at bottom of page) You're Bidding On

THIS AUCTION IS FOR A BRAND NEW 615 PIECE GRADE 8 COARSE THREAD NUT,BOLT, WASHER AND LOCK WASHER ASSORTMENT. THIS KIT CONTAINS THE FOLLOWING: BOLTS ALLOY GRADE 8 HEX HEAD CAP SCREW / BOLT ZINC AND YELLOW 20EA 1/4-20 X 1 20EA 1/4-20 X 1-1/2 20EA/4-20 X 2 20EA 1/4-20 X 2-1/2

LOT 3/8 7/

Here are 200 M8-1,25x40 hexagon head bolts. These are new, shipped in small flat rate box weighing about 8.8 lbs. wrench size is 13mm FREE SHIPPING

Large Flat Rate Box of 430 1/2" Industrial Strength Bolts and Nuts mix of Hex Head and Allen bolts .. 430 total Pieces Even amount bolts and nuts So.. 215 Nuts and 215 Bolts.

These Hanger bolts are 3/8" x 6" long. These are from bulk and are old inventory. The plating is in good condition.

This listing is for 10 pcs. Zinc Plated Flange 6mm Hex Bolts & Nuts M6 x 1.0 Metric Thread Body Hardware Each bolt is 5/8" long (threaded length). Comes with 10x Bolts, 10x lock washers, 10x flat washers, 10x nuts These bolts and nuts require a 10mm wrench or socket to tighten.

This listing is for 10 pcs. Zinc Plated 5mm Hex Sems Bolts Captive Washers M5 X .8 Metric Thread Dog Point Car Body Hardware Each bolt is 7/8" long (Bottom of Head to Tip). Comes with 10x Bolts, and 10x captive flat washers These bolts and nuts require an 8mm wrench or socket to tighten.

This listing is for 10 pcs. Zinc Plated 6mm (10mm Hex) Sems Bolts Captive Washers M6 X 1 Metric Thread Dog Point Car Body Hardware Each bolt is 1-3/16" long (Bottom of Head to Tip). Comes with 10x Bolts, 10x captive lock washers and 10x captive flat washers These bolts and nuts require a 10mm wrench or socket to tighten.

This listing is for 10 pcs. Zinc 6mm Hex Dog Point SEMS 5/8" Bolts & Fender Body M6 x 1.0 Metric Thread Each bolt is 5/8" long (Bottom of Head to Tip). Comes with 10x Bolts, 10x captive lock washers and 10x captive flat washers These bolts and nuts require a 10mm wrench or socket or Phillips heads screw driver to tighten.

This listing is for 10 pcs. Zinc Plated Flange 8mm (12mm Hex) Bolts & Nuts M8 X 1.25 Metric Threaded Body Hardware Each bolt is 5/8" long (threaded length). Comes with 10x Bolts, 10x lock washers, 10x flat washers, 10x nuts These bolts and nuts require a 12mm wrench or socket to tighten.

You are buying the actual item shown in the photo and described below: These are Brand New Anchor Bolts. High Quality ITW Red Head Concrete Anchor Bolts 3/4" X 5-1/2", use 3/4" drill Pac

Genuine U.S. Military Issue Surplus   Aluminum Hub with Shoulder Bolts   P/N: 11659919 P/N: 11659909 On the hub it has the following casting number.... K A E 11659909   The overall size is 4" x 16 1/2" Outer Diameter (approximately) There are two different sizes of shoulder bolts.