flat shank for sale, brand-new and used.

This is a brand new, never used 3/4" cutting diameter straight router bit with two carbide flutes (blades) and a special gullet between cutting edges that allows for material clearing in mortising applications. The geometry of the blades and the open space between them is designed to allow for clean edge and clear bottom mortising up to about 3/8" depth for shallow hinges.

This is a brand new, never used 3/4" diameter plunge bit with a classical detail. This bit can be used for a variety of tasks including as an alternative to v-groove or cove bottom flutes for trim or sign lettering. Adding a 1/2" x 3/4"o,d bearing to the shaft or a suitable guide bushing to your router's base plate will give it the added functionality of an edge detailing bit.

This is a brand new, never used 5/8" cutting diameter straight router bit with two carbide flutes (blades) and a special gullet between cutting edges that allows for material clearing in mortising applications. The geometry of the blades and the open space between them is designed to allow for clean edge and clear bottom mortising up to about 3/8" depth for shallow hinges.

This is a brand new, never used 5/32" radius roman ogee detail router bit with 1/2" shank. Overall diameter is 1-1/16" (11/32" cutting depth) with a 3/8" inch bearing and 2 carbide cutting edges (blades). Roman ogee and other edge detailing profiles are commonly seen on trim edges, and in wood furniture and are produced by running this bit along an edge while the bearing guides the router leaving a detailed edge.

Brand new, never used 3/8" key hole hanger router bit with 2 carbide cutting flutes and a 1/2" shank. Serves for plunge cutting a 3/8" hole to a desired depth at which point the router is slid laterally allowing the bit to cut a 1/4" slot along the top surface while maintaining a 3/8" cleared channel below.

Brand new, never used 1/2" diameter cove box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters up to a depth equal to the diameter of the bit leaving a long channel as in round fluted trim. Bit fits all 1/2" shank portable and table routers.

Brand new, never used 90 degree, 1/4" diameter V-groove router bit with carbide cutting edges and 1/2" shank. These bits are used to make 90 degree corner bottom channels in wood, perhaps most commonly in letter cutting and sign making. Bit fits all 1/2" shank portable and table routers.

Brand new, never used 1/4" diameter cove box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters up to a depth equal to the diameter of the bit leaving a long channel as in round fluted trim. Bit fits all 1/2" shank portable and table routers.

Brand new, never used 90 degree, 3/8" diameter V-groove router bit with carbide cutting edges and 1/2" shank. These bits are used to make 90 degree corner bottom channels in wood, perhaps most commonly in letter cutting and sign making. Bit fits all 1/2" shank portable and table routers.

Brand new, never used 90 degree, 1/2" diameter V-groove router bit with carbide cutting edges and 1/2" shank. These bits are used to make 90 degree corner bottom channels in wood, perhaps most commonly in letter cutting and sign making. Bit fits all 1/2" shank portable and table routers.

Brand new, never used 90 degree, 5/8" diameter V-groove router bit with carbide cutting edges and 1/2" shank. These bits are used to make 90 degree corner bottom channels in wood, perhaps most commonly in letter cutting and sign making. Bit fits all 1/2" shank portable and table routers.

Brand new, never used 3/8" diameter cove box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters up to a depth equal to the diameter of the bit leaving a long channel as in round fluted trim. Bit fits all 1/2" shank portable and table routers.

Brand new, never used 5/8" diameter cove box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters up to a depth equal to the diameter of the bit leaving a long channel as in round fluted trim. Bit fits all 1/2" shank portable and table routers.

Brand new, never used 3/8" diameter round nose or core box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters, but unlike a true cove box bit, a round nose bit will extend into the piece farther than the horizontal cut radius. The resulting 3/8" wide fluted channel can be made up to 11/16" deep with this bit.

Brand new, never used 1/4" diameter round nose or core box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters, but unlike a true cove box bit, a round nose bit will extend into the piece farther than the horizontal cut radius. The resulting 1/4" wide fluted channel can be made up to 5/8" deep with this bit.

Brand new, never used 1/2" diameter round nose or core box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters, but unlike a true cove box bit, a round nose bit will extend into the piece farther than the horizontal cut radius. The resulting 1/2" wide fluted channel can be made up to 11/16" deep with this bit.

Brand new, never used 3/8" flush trim panel pilot router bit with 1 carbide flute and a 1/2" shank. Serves for plunge cutting through a panel usually to make a guided cut against a template or rough framing from the other side. These bits most often see use in cutting larger sink openings in already installed counter tops or where a laminate is placed over an existing sink opening in the counter base material.

Brand new, never used 1/2" round-over bit with 1/2" shank. Fits all 1/2" shank portable and table routers. C2 Micrograin tungsten carbide cutting edge provides a good balance of strength and durability.

Brand new, never used 5/16" round-over bit with 1/2" shank. Fits all 1/2" shank portable and table routers. C2 Micrograin tungsten carbide cutting edge provides a good balance of strength and durability.

Brand new, never used 3/32" round-over bit with 1/2" shank. Fits all 1/2" shank portable and table routers. C2 Micrograin tungsten carbide cutting edge provides a good balance of strength and durability.