floor application for sale, brand-new and used.

Kent Floor Buffer Shampoo Tank 3 Gallon, 53853A The liquid release can then be controlled by the floor buffer operator by a top mounted lever. By lifting the lever, the liquid in the tank is released from the bottom of the tank (gravity feed), down through a hose to a nozzle on the side of the floor buffer, on down to the brush, agitation area. While cleaning, the amount of shampoo or floor cleaner is easily controlled, and the cleaner goes where it is most needed.

Title of your page goes here 1947 AISC STRUCTURAL STEEL CONSTRUCTION MANUAL 5TH This is a 6 1/4" x 9 1/4", semi-pliable hard cover book titled and subtitled Steel Construction / A Manual for Architects, Engineers and Fabricators of Buildings and Other Steel Structures.

Slightly used, fully functional, continuity alarms for electric heated floor installation. These units connect to the electric heating wire during installation, and flooring works, and give a visual and audio signal in case of a break in the heating wire. Includes devices as shown in the photos, no additional accessories or batteries.

CONSTRUCTION ADHESIVE SUPER NAILS SILOCK SL-980 **Styrene Safe **High Strength Bonding **Water Resistant **Attaching Mirror Backed Tiles **Fast And Easy Installation **Interior And Exterior Use DESCRIPTIONSL-980 is a construction adhesive that provides a strong bonding on most building material.It has a good adhesion to a variety of construction materials such as PVC, Wood, Gypsum Board, Concrete, Masonry, A

DORMA BTS75V SERIES DOOR CLOSER Floor-Concealed Door Closer The BTS75V Series of floor-concealed door closers offer adaptability to almost any installation. The closer's compact body permits its use where a larger closer would be prohibitive. Versatility allows installation in thin slab concrete subfloor construction.

This is a squeedgee assembly for a big floor scrubber i dont know what machine it fits so look close at the picture to see if it is the correct one for your application. Thanks for looking

NEW CONDITION - price is for a box of 5 pads FREE SHIPPING Technical Specifications: Designed for use with floor care machines Type: Stripping Pad

Lagler Hummel 8 inch Belt FLOOR DRUM Sander BRAND NEW with full usa WARRANTY SEALED 220V

Gunn Brush Co is offering a heavy duty ( weighs 12.5 lbs) 19" diameter Sandpaper driver with riser, to fit on your 19" & 20" floor machine for floor sanding. Brand new, from inventory Commercial Jobber strength and quality. Usually same day shipping too.This sanding driver allows you to use your floor machine to sand floors with sandpaper, or mesh screens.Heavy duty plywood construction, with a neoprene face.

Gunn Brush Co is offering a heavy duty ( weighs 12.5 lbs) 16" diameter Sandpaper driver with riser, to fit on your 16" & 17" floor machine for floor sanding. Brand new from inventory, these are heavy duty contractor grade units.This sanding driver allows you to use your floormachine to sand floors with sandpaper, or mesh screens.Heavy duty plywood construction, with a neoprene face.

About us Shipping

About us Shipping

Subscribe to Our Newsletter

TrailBlazer® Floor Finish Applicator System simplifies the process of applying floor finish with an ergonomic application tool 1 each (includes starter kit of 1 pad, 3 sets of tubes, 3 manifolds and 3 shower caps) Covers 20,000 sqft/hr; Ideal for areas greater than 2,000 sqft Minimal set up and clean time Greatly reduced finish waste Greatly reduced water waste New in box!