floor conduit for sale, brand-new and used.

These items are the best matching combination you can get to master the art of bending pipe. 1-Two Klein yellow handles 3/4", 38" LONG CAT. NO.51212 and 1/2" CAT.

Klein Tools 85191 conduit-fitting and reaming tool; appears to be in very nice condition showing little wear and usage. Thanks for Looking!

***One Inch EMT conduit and/or 3/4 Inch Rigid Conduit BENDER is in GOOD Condition. ***100% RETURN ACCEPTED with NO Restocking fees, minus shipping fees only. Item (s) must be Return UNUSED with All Parts, Original Documents and Packing.

  Reuse, Recycle, Repurpose      Appleton

580' Total Of THHN #3 Wire & THHN #6 Wire Condition : Used / Excellent / Half Of New Price 580' total of Used THHN #3 Wire 100 amp & THHN #6 Wire 65 amp Your buying 435' of #3 wire for .40 cents a foot & 145' of #6 wire for .17 a foot. I pulled this wire from about 150 to 200 foot run of conduit, it was a 100 amp, 220 volt, 3 phase service, with 3, THHN # 3 wires and 1, THHN # 6 neutral wire, all in excellent condition. New the #3

Greenlee roller support for 1/2"- 1-1/4" rigid or imc conduit fits greenlee 555 bender. Good used condition. No tag to positively show it is greenlee but works perfect with greenlee 555 .Greenlee 00936 roller support.

Greenlee 881CT bender for 2-1/2 thru 4" Thinwall, IMC, and Rigid conduit. This bender was bought new 2013, and used on 1 large project, which is now complete. Bender includes 980 pump and bending table, complete with all pins and parts.

Used Greenlee 441-3 Greenlee 441-3 Features: •Yoke frame slides into the end of conduit and holds sheave, allowing the cable being fed into the conduit to smoothly roll over the sheave.

Description: This versatile fish tape has a non-conductive nylon construction for use in telecom, electrical, wall and floor conduit. It’s the perfect tool to aid in pulling cables through occupied duct and panel boxes. This nylon tape resists corrosion and can safely support up to 1000 lbs.

WarnerSales Warner See all my listings: WarnerSales

Greenlee knockout punch no. 721-2 in excellent condition. Punch has never been used, but has some scratches from box wear.

Used Enerpac hydraulic conduit and pipe bender 1/2"-2" with Enerpac hush pup electric hydraulic pump 

For sale is a Greenlee No. 1801 rigid conduit bender that bends 1.25" and 1.50" rigid conduit. It is in great working order and is sold as is.

Item Description Klein Tools 19352 Conduit Reamer This is a Klein Tools 19352 Conduit Reamer in good condition. The reamer fit 1/2, 3/4, and 1" conduit. Shipping Box Size 9.5 X 7 X 1 Estimated Package Weigh

GREENLEE 1" Conduit 1.362" diameter Knockout Metal Punch Die AV125, AV126, 500-404 Good used condition AV125 punch AV126 die 500-404 draw stud 1" conduit (1.362", 34.6 mm hole) No damage. Cutting edges good. Used tools may have some typical dirt, grime, scuffs, dings, scratches, possible tarnish, loss of finish and/or rust.

YOU ARE BIDDING ON… GREENLEE KNOCKOUT CONDUIT DIE PUNCH SET - 3Pc Set UP -

Greenlee 3" CONDUIT Sized Knockout Punch. Actual hole size is appx 3.5" diameter. This is a good used punch, cutting tips sharp and threads are good, however, the top 1-2 threads are pulled off.

There are needed parts to bens 1 1/4", 1 1/2", 2", 2 1/2" 3" and 4" ridged conduit. There are also the parts needed to bend 1 1/4", 1 1/2" and 2" Thin wall. There is a Greenlee No 915 Hydraulic pump, 120 volt, a hydraulic hose and 2 carrying cases.