floor mounts for sale, brand-new and used.

Satisfaction Guaranteed!!! You are buying a USED Starrett No. 811-5 Series Dial Test Indicator.

Satisfaction Guaranteed!!! You are buying a used INTERAPID No. 312B-1 Dial Test Indicator.

Satisfaction Guaranteed!!! You are buying a used MITUTOYO No. 513-252 Dial Test Indicator.

Click here to request a quote with price on this stock number from Gray Machine Specification for Stock # 11019

This is an incomplete 24" mini milling lathe unit that is similar to a Sherline 4400. The base is 24". This lathe is missing the drive motors, but includes belts,sensor, mountable base, extra connecting cables, Jacobs chuck, and mounts for motors.

Our internal inventory number on this product is JS# X2-17D 12-29-14 PLEASE NOTE: This item was removed from a working Mazak H-400 horizontal machining center with a Mazatrol M-32 control (serial number 76474).

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

Llambrich

Hardinge CC25R Right-Hand Extension Tool Holder: The extension holder is used to help balance the tool length in a turret setup, and give additional support for 1/2" right-hand square shank tool bits that overhang the turret. They can be used for facing, turning, boring, chamfering, or threading operations. The extension holder mounts directly

Here is a rewound ignition coil for an early Briggs and Stratton engine. It mounts with three holes. It has been vacuum dipped with a heat cure epoxy resin and wound good and hot as it should be.

Here is a sealed well made Honeywell AC panel voltmeter made for the Military that was apparently designed for monitoring AC line voltage on a panel or generator set. It mounts in an approximately 2 3/4" diameter hole. The outside bezel measures 3 1/2".

USED CAT/BT 40 TAPER TOOL CHANGE FIXTURE. IT MOUNTS IN VISE – YOU COULD DRILL AND TAP BACKSIDE TO MOUNT TO BENCH. PLEASE ASK QUESTIONS AS NO RETURNS.

Enco Model 3 1/2C Four-Way Tool Post This is an older tool-post that is in very good condition. This has been used little if at all. The is some wear where the handle has been turned around, and the screw on the handle is buggered a little, but I can't see any signs that there has ever been a tool-bit mounted up in it (see pics of set screws).

This is a nice VERY Heavy Vintage 3 Jaw chuck from a Vintage 12" Powermatic Model 45 Wood Lathe. It is marked ref 6134 The Cushman Chuck Co Hartford Conn made in the USA Some dust and dirt wear and tear rust and pitting but In good working shape.It is a bit larger than 6" diameter and 2 1/2" thick @ 3 3/4 thick with jaws and face plate This auction is for the chuck, 2 sets of jaws, a face plate and bolts with a 1" bore mounts clockwise (right handed) on a spindle with 8 threads per inch.

KITAGAWA B08 8 INCH DIAMETER HYDRAULIC CHUCK IN GOOD CONDITION. A style socket screw mount. Includes all mounting screws and jaw mounts.

For sale is a Hardinge Model 30 AHC 5" 3 jaw self centering Chuck.The mounting opening is 2 1/4" and mounts with a set screw. Shipping will be $15.00 Thanks for looking and God Bless!

This is a 5" 4-jaw self-centering (scrolling) chuck with a 5C collet mount/arbor. Unlike the little 3 and 4 inch 3-jaw models that are seen everywhere, this is a real chuck. The jaws have the size and depth to hold the toughest project.

This Buck Chuck has the Body of a 5C Collet made to be mountwith a 7/8-16 Draw Bar. By adapting a Plug 7/8-16 X 1"1/4-20 mounts on a Hardinge Lathe or equivalent.