Like new GE AquaTrans UTX 878 Panametrics Ultrasonic Flowmeter with 2 UTXDR-05-MB transducers, mounts and wires seen in the pictures. Used for testing only inside the plant and found out this will not work for our current configuration.
THESE ARE LINEAR POSITIOINER / OPTICS MOUNTS OF UN KNOWN MANUFACTURE. THEY HAVE A VERY SMOOTH .5" BALL BERING MOTION OPERATED VIA A LOCKING THUMB SCREW. THE AVAILABLE SPECS ARE AS FOLLOWS: TOP PLATFORM, APPROX.
THIS IS A VERY SOLID, HEAVY DUTY DUAL AXIS LINEAR ACTUATOR AND AUTOMATIC OILING APARATUS OF UN KNOWN MANUFACTURE. IT HAS A FOOT PRINT OF 22" X 10", A MOUNTING SURFACE OF 8" X 8". AND THE MOTOR MOUNTS ARE TAPPED AT 2.75" ON CTR.
THIS IS A PAIR OF USED BARRY SERVA MOUNTS. THEY ARE BEING SOLD TOGATHER, AS-IS. AS CAN BE SEEN IN THE PHOTOS, ONE IS QUITE CLEAN LOOKING AND THE OTHER, NOT SO MUCH SO.
This item was purchased less than a year ago. This inkjet coder has non-porous substrates, includes a 3.5" touchscreen controller, 100 stored print message capacity, print head with 3ft umbilical, floor stand, print head and controller mounts and fiber optic photo eye-complete system.
Made by Pulian This is a "sound proof" (according to the manufacturer) granulating machine / power crushing machine in good used condition. The entire inside of the machine is insulated with sound-absorbing foam, which greatly reduces the noise this machine makes. Note that the latches for the door below the hopper are broken as shown in the second photo above.
This auction is for one (1) like new Fostec (also marked Schott-Fostec, LLC) Fiberoptic Ring/Light Assembly. I don’t see a model or part number on these, but they were removed from a Melles-Griot machine vision subassembly that came in a lot of spare parts. This features: The input is black anodized aluminum that measures
The DCS 3500 conveyorized GERBERcutter system offers the highest single-ply throughput available. The advantages of low-or single-ply cutting are speed, accuracy, and flexibility. Added benefits include material savings, pattern match capabilities, and lower operating costs.
For sale is a MC brand folder flat mount used for making straps on children sun suits and many other operations,takes terry cloth, fleece, heavy cotton,etc.mounts on most any flat bed machine. TRIM SIZE 3 1/4 FINISH SIZE 1 1/4 FOLDER OVERALL LENGTH 10 INCHES THANKS FOR LOOKING
This is a welding wire support arm that is used for automated welding. This is a very heavy duty aluminum casting. The spool adaptor mounts at the end of the arm.
Required when using the XR Control with power sources having only 115 VAC available. Mounts at power source and includes a 10 ft (3 m) 115 VAC cord and contactor cord with Hubbell connectors.
welding torch tip in good used condition, I don't know what it fits so if you have a question please ask The only marking I could see on the body and tip is a 4. It looks like it mounts like the Oxweld I have listed
Used machine out of my shop. Pulled from service working fine. Would still be using it, but I had a chance to upgrade to a Ballestrini automatic model.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
