floor platform for sale, brand-new and used.

I'm not in the beverage industry, I bought this unit at an auction. It's from a Starbucks that was located inside a Barnes and Nobles that closed down. This unit was manufactured in 2005, but hasn't been used in the past 5 years.

Hi. I purchased this off E-bay from a reputable sellar 8 months ago and have never used it. So, I'm relisting.

Descriptions and Feature Cisco ASA 5520 ASA5520-K8 V08 SSM-20 Module Advanced Security Firewall

Very Cute - Fox Butler Business Card Holder - Made of Resin - 12" tall x 3-1/2" wide (at widest point) x 4-1/2" Platform - Business Card Holder is 4" x 2-3/4". There is no maker mark. In good condition .

UP FOR AUCTION IS A USED METTLER TOLEDO MODEL 8217 STAINLESS STEEL PLATFORM POINT OF SALE POS SCALE. IT WAS TESTED AND WORKS VERY GOOD. 8217 Scales represent the perfect solution for point-of-sale, PC, and portioning control applications.

Available for sale is a RARE 13 step rolling ladder with a hoist lift platform with a 300 lb capacity. - The max total height is 172" from the top most guard rail. - The top step/platform is at 130" height - The platform is 19"x24" - In total the machine is 125" long x 40" wide x 172" high -The BUYER ARRANGES & PAYS ALL SHIPPING COSTS.

The 6820 sonde is a complete sampling and monitoring water quality station providing continuous data from a compact system measuring Temperature, Conductivity, pH, Turbidity and Dissolved oxygen. It is also a IP68 sonde deployable to depths of 61m. Sensor and cable are not included.

You are bidding on a Mettler Toledo Open Platform Scale PM34-K DeltaRange. Item powers up, and it’s in excellent physical condition, but it has not been tested for functionality. The scale has some very light scratches on the platform, and in the front right hand corner of the scale there are a couple of small dings that cover about the size of a dime or less.

Lab Line 3520 Orbit Orbital Shaker with Meter, Speed Control, Timer and Removeable 32 Holder Platform. I picked this up from a local "BIG TEN" University that is updating equipment. This unit is in good working condition.

VINTAGE PITNEY BOWES MODEL 4916-65966 POSTAGE SCALE THE BASE IS 10" LONG X 4" WIDE, THE PLATFORM IS 3" X 4", tHE SCALE WEIGHS 4 LBS 5 OZ. IT CAN HANDLE A WEIGHT UP TO 16 OZ.

Health o meter 2101KL platform scale in like new condition! 

Lifts 30,000lbs. Platform Slides are 81" Long x 14" Wide, Total platform for a vehicle or forklift is 110" Long x 81" Wide Must have a pit dug to lower the entire lift or must have ramps made for vehicles to ramp up to platform. 460 III Phase, 108" wide x 175" long - 9000lbs.

This industrial strength Mettler Toledo pro quality digital platform scale has a stainless steel platform, a large easy to read digital display (which has some surface scratches as shown), it is in clean, gently used condition and it appears to be working just fine as shown in the photographs. It is crisply marked with the numbers ‘144870’ and ‘A380’ on the bottom of the unit. Not sure if it's the stock power cord or not but it works perfectly.

This platform is similar to the Newport TGN 120 except it has a 50 mm bore through the center of the 48 mm bolt pattern. It is 120 mm wide and 180 mm long. In excellent condition.

One (1) nice used PELOUZE model X2 Postal Scale CAPACITY 2 lb x 1/2 oz February 1991 postal rates Shows 1st Class, 3rd Class, weight & Int'l Air Except CAN/MEX No cracks, scratches or damage to plastic body Minor wear on stainless platform from use No pets or smoke Label on the bottom says: Pelouze Scale Co. A subsidiary of Health o meter, INC. Bridgeview, IL 60455

Pay Pal will only be accepted as a deposit no greater than 10%. A deposit is no necessary if your at pickup or if your sending a check. Bank transfer is also accepted.

We're selling a Kinetic Systems Benchmate Vibraplane 2210-01-11 vibration isolation platform in excellent condition. This platform measures 20 by 24 inches and is 3 inches tall. It can be charged with either a hand air pump or a compressed air supply.