fluid d for sale, brand-new and used.

1.The trane water regulating valve assembly consists of a direct acting valve and a reverse acting valve installed on the water-out side of the unit.The direct acting valves opens in response to an increase in discharge pressure during the cooling cycle. The reverse acting valve opens in response to a decrease insuction pressure during the heating cycle. Water regulating valves should be used where low flow and low or high fluid temperature conditions could occur.

The nylon-covered aluminum base, glass-filled nylon reservoir, and fiberglass handle provide corrosion resistance and are lighter than steel hydraulic hand pumps. The hand pump has a pressure rating of 10,000 pounds per square inch (psi) and an internal pressure relief valve that protects against overloading the pump. The two-speed operation requires up to 78% fewer handle strokes than single-speed hydraulic hand pumps, and the handle locks into place for secure transport.

This is a RE-BUILT TRW power steering? pump. There is a number in the casting: FR904008C.

(one) Hydraulic power pak , 10hp , 230/460 vac , 1750 rpm , tag on reservoir says 1500 psi , gage goes to 2000 psi , supply hoses look to be 1" . Thermal transfer heat exchanger model RM-24-22 , 300 psi , 350F , dial temperature gage , sight level gage with low level switch . Hydac filter housing with sensor switch , SQ D disconnect switch , enclosed on/off switch .

Selling a Used but fully working Grundfos Made in Germany Horizontal Booster Pump in stainless steel construction. Model: D 4J514565 P10702

var itemNumber = window.ebayItemID ?

Key Features Fendall Porta Stream III is freeze protected by a special form fitted insulated cover and twin, 600 watt, 110 volt thermostatically controlled heaters for indoor and outdoor use. The fluid-heating system makes it ideal for use between 72? and -32?

WINBRO Tapfree 2 Cutting Fluids - Container Size: 5 Gallon MFR : 20205 Hydro-Lube® Action 5 GAL TAPFREE 2 CUTTING FLUID - WINBRO Hydro-Lube® Action

SAFE TAP Ultima Tapping Fluids - Container Size: 5 Gallon MFR : 71954 5 GALLON ULTIMA TAPPING FLUID - SAFE TAP Applications

MONROE COOL TOOL® Cutting & Tapping Fluids - Container Size: 5 Gal. Pail MFR : 03-050 0003-1050 5GAL COOLTOOL2 CUT&TAP FLUID - MONROE Applications

Cimperial 1070 Metalworking fluid recommended for a wide variety of heavy-duty machining and grinding operations including turning, drilling, tapping, reaming, gear cutting, broaching, centerless grinding and I.D. grinding Metals: Carbon Steels, High Speed Steel, Cast Steels, Alloy Steels, Tool Steel, Stainless Steel, Cast Iron, Aluminum, Bronze, Brass, Copper Metals Duty Range: For moderate to heavy-duty operations Excellent lubricity E

SHARS CNC 5MT Morse Taper 5 Medium Long Nose Live Center MT5 High Speed .00019" Premium Quality 100% SATISFACTION GUARANTEE Product Code 202-3531 Product description Shank: MT5 Max weight of work piece: 2205lbs Max RPM: 2500 Concentricity: .00019" / 0.005mm

SHARS CNC Ready MT5 Live Center Morse Taper 5 Medium Duty High Speed MT .00019" Product Code 202-3526 Product description Shank: MT5 Max weight of work piece: 2646lbs Max RPM: 2500 Concentricity: .00019" / 0.005mm Point Diameter C: 1.50" Point Length D: 1.78" Body Diameter B: 3.07" Product application 100% tested T.I.R. to .0002" before shipping Test equipment

SHARS CNC Ready MT4 Live Center Morse Taper 4 Medium Duty High Speed MT .00019" Product Code 202-3525 Product description Shank: MT4 Max weight of work piece: 1323lbs Max RPM: 3500 Concentricity: .00019" / 0.005mm Point Diameter C: 1.18" Point Length D: 1.44" Body Diameter B: 2.52" Product application 100% tested