+ Post new Ad
Glascraft Chop System Internal - Glas Craft - Cart, Mast, Boom, Pumps, Spray Gun, US $2200 – Picture 0
Glascraft Chop System Internal - Glas Craft - Cart, Mast, Boom, Pumps, Spray Gun, US $2200 – Picture 0

Glascraft Chop System Internal - Glas Craft - Cart, Mast, Boom, Pumps, Spray Gun

US $2200

  • Rogersville, Missouri, United States
  • Jun 17th
Open on mobile:
QR code
Complete Glascraft Chop System Internal  New, unassembled and unpacked.   Please call 417-299-2476 with any questions.  I am selling this for a friend.  We will be getting better pictures in the next week. Includes everything in the pictures, this is a complete system that is over $15,000 new. Some of the main components included: Glascraft Cart Mast & Boom GC-1328 B  Glascraft Super Slave Pump SSP GC-1337 B  Glascraft Material Pump GC-1303C Glascraft Formula Gun 23750-00 Local pick up is preferred, but shipping is available at the owners expense.  Shipping will be roughly $400 to your business in the lower 48 states.

Directions

Similar products from Other Plastic Processing Tools

Aluminum Heater Block for 3D Printer Extruder Hot End MK7 MK8

Aluminum Heater Block for 3D Printer Extruder Hot End MK7 MK8

  • Hongkong, Hong Kong
  • Jun 17th
0.4MM Stainless Extruder Nozzle For 1.75mm Filament 3D Printer

0.4MM Stainless Extruder Nozzle For 1.75mm Filament 3D Printer

  • Beijing, China
  • Jun 17th
M6 x 30MM Nozzle Throat for 3D Printer Extruder 1.75mm Filament

M6 x 30MM Nozzle Throat for 3D Printer Extruder 1.75mm Filament

  • Shenzhen, China
  • Jun 17th
Used- Maier Rewinder, Model WSN24-M4-2. 3 kw hydraulic power system with rewindi

Used- Maier Rewinder, Model WSN24-M4-2. 3 kw hydraulic power system with rewindi

  • Bensenville, Illinois, United States
  • Jun 17th
Used- Maier 47" Wide Nip Roll station, Model AP1200. (1) 6" diameter x 47" wide

Used- Maier 47" Wide Nip Roll station, Model AP1200. (1) 6" diameter x 47" wide

  • Bensenville, Illinois, United States
  • Jun 17th
Used- Cross Head Die Block, last used on a 1-1/ 2" extruder.

Used- Cross Head Die Block, last used on a 1-1/ 2" extruder.

  • Bensenville, Illinois, United States
  • Jun 17th
Used- Cross Head Die Block, last used on an approximate 2" extruder.

Used- Cross Head Die Block, last used on an approximate 2" extruder.

  • Bensenville, Illinois, United States
  • Jun 17th
Used- Ledco Inc Laminator, Model Digital 38". Approximate 38" wide laminate area

Used- Ledco Inc Laminator, Model Digital 38". Approximate 38" wide laminate area

  • Bensenville, Illinois, United States
  • Jun 17th
Used- RDN Vacuum Sizing Tank, Model 4D3V2T30, 304 stainless steel. 12" wide x 12

Used- RDN Vacuum Sizing Tank, Model 4D3V2T30, 304 stainless steel. 12" wide x 12

  • Bensenville, Illinois, United States
  • Jun 17th
Used- Beringer 4.5'' Hydraulic Screen Changer, Model 4UL, maximum 600 deg F and

Used- Beringer 4.5'' Hydraulic Screen Changer, Model 4UL, maximum 600 deg F and

  • Bensenville, Illinois, United States
  • Jun 17th
SIBE AUTOMATION CONTROL SYSTEM VACUUM FORMING HEATERS 6 ZONES ENERGY MANAGEMENT

SIBE AUTOMATION CONTROL SYSTEM VACUUM FORMING HEATERS 6 ZONES ENERGY MANAGEMENT

  • Ocala, Florida, United States
  • Jun 17th
SIBE AUTOMATION CONTROL SYSTEM VACUUM FORMING OVEN 24 ZONE ENERGY MANAGEMENT

SIBE AUTOMATION CONTROL SYSTEM VACUUM FORMING OVEN 24 ZONE ENERGY MANAGEMENT

  • Ocala, Florida, United States
  • Jun 17th
Elstein FSF 650 230V Infrared Heating Element 650W 750C MAX

Elstein FSF 650 230V Infrared Heating Element 650W 750C MAX

  • Corbin, Kentucky, United States
  • Jun 17th
Smart Extruder Plus

Smart Extruder Plus

  • Justice, Illinois, United States
  • Jun 17th
Lot of 7 Conair Loaders

Lot of 7 Conair Loaders

  • Elk Grove Village, Illinois, United States
  • Jun 17th
Used- Motan Diagnostic Dryer, model MDD100. 1/60/240 volt, 41.6 amp. Total heate

Used- Motan Diagnostic Dryer, model MDD100. 1/60/240 volt, 41.6 amp. Total heate

  • Bensenville, Illinois, United States
  • Jun 15th
Used-(1) Set of (2) Cincinnati 35mm conical twin screws, serial #T7382/48.

Used-(1) Set of (2) Cincinnati 35mm conical twin screws, serial #T7382/48.

  • Bensenville, Illinois, United States
  • Jun 15th
Used- (1) Set of (2) Cincinnati 35mm conical twin screws, serial #T7382/78.

Used- (1) Set of (2) Cincinnati 35mm conical twin screws, serial #T7382/78.

  • Bensenville, Illinois, United States
  • Jun 15th
Unused- Extruder Head for 55MM Twin Screw Extruder

Unused- Extruder Head for 55MM Twin Screw Extruder

  • Bensenville, Illinois, United States
  • Jun 15th
Used- Zenith Gear Pump, carbon steel. Driven by a 2 hp, 180 volt DC gearmotor, r

Used- Zenith Gear Pump, carbon steel. Driven by a 2 hp, 180 volt DC gearmotor, r

  • Bensenville, Illinois, United States
  • Jun 15th

People who viewed this item also vieved

Cartridge Heater 3/4"diameter x 22"long, 240volt, 1150watt

Cartridge Heater 3/4"diameter x 22"long, 240volt, 1150watt

  • Wendel, Pennsylvania, United States
  • Jan 30th
Cartridge Heater 3/4"diameter x 13"long, 230/240volt 1000w

Cartridge Heater 3/4"diameter x 13"long, 230/240volt 1000w

  • Wendel, Pennsylvania, United States
  • Jan 30th
Cartridge Heater 16mm dia x 6.375"long, 220volt, 1300watt, 96"armor Leads

Cartridge Heater 16mm dia x 6.375"long, 220volt, 1300watt, 96"armor Leads

  • Wendel, Pennsylvania, United States
  • Jan 30th
001-10006 Convectronics Air Heater

001-10006 Convectronics Air Heater

  • Wendel, Pennsylvania, United States
  • Jan 30th
New C-20 DeDuster for Injection Molder

New C-20 DeDuster for Injection Molder

  • Lancaster, Pennsylvania, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies