+ Post new Ad
SIBE AUTOMATION CONTROL SYSTEM VACUUM FORMING OVEN 24 ZONE ENERGY MANAGEMENT, US $5300 – Picture 0
SIBE AUTOMATION CONTROL SYSTEM VACUUM FORMING OVEN 24 ZONE ENERGY MANAGEMENT, US $5300 – Picture 0

Sibe Automation Control System Vacuum Forming Oven 24 Zone Energy Management

US $5300

  • Ocala, Florida, United States
  • Jun 17th
Open on mobile:
QR code
ON ALL ITEMS SHIPPED TO A FLORIDA ADDRESS WE COLLECT FLORIDA  SALES TAX THIS CONTROL SYSTEM WILL HANDLE 24 DIFFERENT HEATING ZONES, EACH ZONE UP TO 20 AMPS, 220 OR 480 VOLTS CONTROL OF EACH ZONE IS PROVIDED BY PERCENTAGE TIMERS RUN BY AN AUTOMATION DIRECT PLC THE PLC ALSO PROVIDES FOR A SOFT START SEQUENCE REDUCING POWER USAGE BY ABOUT 30% INPUT OF PERCENTAGE TO EACH HEATER IS DONE VIA AN INCLUDED DV-1000 OPERATOR INTERFACE EACH ZONE IS CONNECTED TO A CARLO GAVAZZI SOLID STATE RELAY WE INCLUDE 10 FEET OF HIGH TEMPERATURE WIRE FROM EACH ZONE SYSTEM IS SHIIPED READY TO RUN, JUST CONNECT YOUR POWER TO THE POWER DISTIBUTION BLOCK INCLUDED GREAT FOR RETROFITS OF OLDER THERMOFORMING  MACHINES OTHER CONFIGURATIONS AVAILABLE THIS IS A BUILT TO ORDER SYSTEM, SHIPS IN 2 WEEKS THIS SYSTEM IS COVERED BY A 12 MONTH WARRANTY IF YOU NEED FURTHER INFORMATION PLEASE CONTACT US AT 678-860-1741 ANOTHER FIELD PROVEN SYSTEM FROM SIBEAUTOMATION.COM IF YOU NEED WE WILL INSTALL ON SITE, FEES APPLY   On Dec-04-12 at 18:29:47 PST, seller added the following information: FREE! Sellers: Add a FREE map to your listings. FREE! On Dec-05-12 at 02:33:12 PST, seller added the following information: Every buyer gets a MyStoreRewards invitation for cash back

Directions

Similar products from Other Plastic Processing Tools

M6 x 30MM Nozzle Throat for 3D Printer Extruder 1.75mm Filament

M6 x 30MM Nozzle Throat for 3D Printer Extruder 1.75mm Filament

  • Shenzhen, China
  • Jun 17th
Used- Maier Rewinder, Model WSN24-M4-2. 3 kw hydraulic power system with rewindi

Used- Maier Rewinder, Model WSN24-M4-2. 3 kw hydraulic power system with rewindi

  • Bensenville, Illinois, United States
  • Jun 17th
Used- Maier 47" Wide Nip Roll station, Model AP1200. (1) 6" diameter x 47" wide

Used- Maier 47" Wide Nip Roll station, Model AP1200. (1) 6" diameter x 47" wide

  • Bensenville, Illinois, United States
  • Jun 17th
Used- Cross Head Die Block, last used on a 1-1/ 2" extruder.

Used- Cross Head Die Block, last used on a 1-1/ 2" extruder.

  • Bensenville, Illinois, United States
  • Jun 17th
Used- Cross Head Die Block, last used on an approximate 2" extruder.

Used- Cross Head Die Block, last used on an approximate 2" extruder.

  • Bensenville, Illinois, United States
  • Jun 17th
Used- Ledco Inc Laminator, Model Digital 38". Approximate 38" wide laminate area

Used- Ledco Inc Laminator, Model Digital 38". Approximate 38" wide laminate area

  • Bensenville, Illinois, United States
  • Jun 17th
Used- RDN Vacuum Sizing Tank, Model 4D3V2T30, 304 stainless steel. 12" wide x 12

Used- RDN Vacuum Sizing Tank, Model 4D3V2T30, 304 stainless steel. 12" wide x 12

  • Bensenville, Illinois, United States
  • Jun 17th
Used- Beringer 4.5'' Hydraulic Screen Changer, Model 4UL, maximum 600 deg F and

Used- Beringer 4.5'' Hydraulic Screen Changer, Model 4UL, maximum 600 deg F and

  • Bensenville, Illinois, United States
  • Jun 17th
Glascraft Chop System Internal - Glas Craft - Cart, Mast, Boom, Pumps, Spray Gun

Glascraft Chop System Internal - Glas Craft - Cart, Mast, Boom, Pumps, Spray Gun

  • Rogersville, Missouri, United States
  • Jun 17th
SIBE AUTOMATION CONTROL SYSTEM VACUUM FORMING HEATERS 6 ZONES ENERGY MANAGEMENT

SIBE AUTOMATION CONTROL SYSTEM VACUUM FORMING HEATERS 6 ZONES ENERGY MANAGEMENT

  • Ocala, Florida, United States
  • Jun 17th
Elstein FSF 650 230V Infrared Heating Element 650W 750C MAX

Elstein FSF 650 230V Infrared Heating Element 650W 750C MAX

  • Corbin, Kentucky, United States
  • Jun 17th
Smart Extruder Plus

Smart Extruder Plus

  • Justice, Illinois, United States
  • Jun 17th
Lot of 7 Conair Loaders

Lot of 7 Conair Loaders

  • Elk Grove Village, Illinois, United States
  • Jun 17th
Used- Motan Diagnostic Dryer, model MDD100. 1/60/240 volt, 41.6 amp. Total heate

Used- Motan Diagnostic Dryer, model MDD100. 1/60/240 volt, 41.6 amp. Total heate

  • Bensenville, Illinois, United States
  • Jun 15th
Used-(1) Set of (2) Cincinnati 35mm conical twin screws, serial #T7382/48.

Used-(1) Set of (2) Cincinnati 35mm conical twin screws, serial #T7382/48.

  • Bensenville, Illinois, United States
  • Jun 15th
Used- (1) Set of (2) Cincinnati 35mm conical twin screws, serial #T7382/78.

Used- (1) Set of (2) Cincinnati 35mm conical twin screws, serial #T7382/78.

  • Bensenville, Illinois, United States
  • Jun 15th
Unused- Extruder Head for 55MM Twin Screw Extruder

Unused- Extruder Head for 55MM Twin Screw Extruder

  • Bensenville, Illinois, United States
  • Jun 15th
Used- Zenith Gear Pump, carbon steel. Driven by a 2 hp, 180 volt DC gearmotor, r

Used- Zenith Gear Pump, carbon steel. Driven by a 2 hp, 180 volt DC gearmotor, r

  • Bensenville, Illinois, United States
  • Jun 15th
Used- Dynisco 2-1/2" Manual Screen Changer.

Used- Dynisco 2-1/2" Manual Screen Changer.

  • Bensenville, Illinois, United States
  • Jun 15th
Used- PTI Processing Technologies 2-1/2" Trident Series Single Screw Extruder, M

Used- PTI Processing Technologies 2-1/2" Trident Series Single Screw Extruder, M

  • Bensenville, Illinois, United States
  • Jun 15th

People who viewed this item also vieved

Cartridge Heater 16mm dia x 6.375"long, 220volt, 1300watt, 96"armor Leads

Cartridge Heater 16mm dia x 6.375"long, 220volt, 1300watt, 96"armor Leads

  • Wendel, Pennsylvania, United States
  • Jan 30th
001-10006 Convectronics Air Heater

001-10006 Convectronics Air Heater

  • Wendel, Pennsylvania, United States
  • Jan 30th
New C-20 DeDuster for Injection Molder

New C-20 DeDuster for Injection Molder

  • Lancaster, Pennsylvania, United States
  • Jan 30th
FAST HEAT B02NW Heater 2" Dia x 2" 300W

FAST HEAT B02NW Heater 2" Dia x 2" 300W

  • Chicago, Illinois, United States
  • Jan 30th
Motan Load Medium Hopper w/ Outside Air Filter and Mounting Table

Motan Load Medium Hopper w/ Outside Air Filter and Mounting Table

  • Carol Stream, Illinois, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies