Grinders - Professional (Light Equipment) for sale, page 65

Suhner minifix 25-r set 11,000-25,000 rpm electric flex shaft machine

Rome, GA, United States
Jun 9th

The Minifix is Suhner’s smallest flexible shaft grinder but don’t let the small size fool you. When it comes to flexible shaft machines, the size is dictated by the job at hand. The Minifix is suited to fine, detail work either by the serious hobbyist or industrial user.

Suhner fh 12 straight toolholder w/ 1/2" collet

Rome, GA, United States
Jun 9th

Suhner offers a toolholder for practically every grinding or polishing job there is. The FH 12-1/2 straight toolholder comes with a 1/2” collet and can run any abrasive or polishing accessory that can be run on a 1/2” straight shank mandrel such as wire wheels, sanding drums, flap wheels and buffs.

Suhner na 12x2000 flexible shaft w/ din10 & g28 couplings

Rome, GA, United States
Jun 9th

Suhner flexible shaft assemblies are a complete unit including the flexible shaft core, flexible shaft casing and appropriate couplings for use on Suhner flexible shaft drive motors and with Suhner tool attachments. The shafts come assembled and lubricated and are ready to use out of the box.

Suhner fsm right angle grinder attachment

Rome, GA, United States
Jun 9th

Suhner offers a toolholder for practically every grinding or polishing job there is. The FSM 1:1 right angle grinder comes with a guard that will accommodate accessories up to 7” in diameter. You can use any wire brush, cutoff wheel, grinding disc or flap disc that will safely mount on a standard 5/8”-11 threaded arbor.

Suhner rotoset 25-r set 11,000-25,000 rpm, 1.34 hp. electric flex shaft machine

Rome, GA, United States
Jun 9th

The Rotoset 25-R Set is Suhner’s most complete and capable portable flex shaft set. The set includes a variable speed motor, an NA 7X2000 flexible shaft, an FH 7 straight toolholder w/ 1/4 ” collet, a WIG 7 right angle grinder and a metal carrying case. The WIG 7 is a right angle grinder with a 5/8”-11 spindle, geared down from the high speed of the motor to enable you to use all the usual abrasives and brushes commonly paired with a 4 1/2 ” grinder.

Heavy duty suhner rotostar set, 3,000/6,000/12,000 rpm flex shaft machine

Rome, GA, United States
Jun 9th

The Heavy Duty Rotostar Set is Suhner’s strongest and most powerful portable flex shaft set. The set includes a 2 hp Rotostar motor, an NA 12X2000 flexible shaft, an FH 12 straight toolholder w/ 1/4 ” collet, a 1/2 ” collet and a metal carrying case (additional extra cost accessories shown in picture). The FH 12 straight toolholder allows you to run carbide burrs, mounted points, flap wheels and wire brushes on a 1/4 ” arbor.

Spz type 1/2" collet for fh 12 toolholders

Rome, GA, United States
Jun 9th

The SPZ type 1/2 ” collet is used in the Suhner FH 12 straight toolholder. It replaces the standard 1/4 ” collet and enables the use of abrasive and polishing accessories with a 1/2 ”" shank. Examples include flap wheels, buffing wheels, sanding drums and other accessories up to 6" in diameter that are mounted on a 1/2 ” shank arbor.

Suhner stm rotofera set for 460 volt, 60 hz., 3 phase

Rome, GA, United States
Jun 9th

The Rotofera is Suhner’s most popular full size flexible shaft machine. The service life of the machine is measured in decades even under constant daily use. The reliable three phase induction motor runs more quietly and more efficiently than either conventional pneumatic or electric tools.

Dewalt d28494 7/9" angle grinder

Boaz, Alabama, United States
Jun 9th

The grinder is used and shows a lot of cosmetic wear as you can see in the pictures but still works good. Shipping international will be additional cost.

7 inch pcd cup wheel 1/3 circle,6pcs,with diamond sweeper:bore 5/8"-11

Shrub Oak, New York, United States
Jun 9th

This 7 Inch PCD / Diamond Blade is great for removing glue and patch from concrete floors.

10 inch pcd plate 16 seg plate for concrete edco machine etc.

Shrub Oak, New York, United States
Jun 9th

10 Inch PCD / Plate is great for removing glue and patch from concrete floors.

7 inch dust shroud, made of iron material with flat edge

Shrub Oak, New York, United States
Jun 9th

7 Inch dust shroud allows the user to get grind right up to the wall.Hooks up to a shop Vac.

Mandrel for sunnen bushing grinder phg-173

Baltimore, Maryland, United States
Jun 9th

6730. Mandrel for Sunnen Bushing Grinder PHG-173. New in the box.

Nice!! boyar schultz 612 manual surface grinder

La Puente, California, United States
Jun 9th

Made in the U.S.A. by Boyar Schultz Corporation of Chicago, Illinois. This is a Six Twelve Manual Surface Grinder in working condition.

Bosch tools 18 volt 4-1/2" small angle grinder cag180-01 new

Marion, Arkansas, United States
Jun 9th

You are bidding on a *NEW* Bosch Tools 18 Volt 4-1/2" Small Angle Grinder CAG180-01 with 2 - 2.0Ah batteries and a charger. Includes: 1 Grinder CAG181 2 2.0Ah batteries 1 Charger Does not include bag, manual or box. Benefits: CAG180-01 18V Lithium-Ion 4-1/2 In.