heavy duty surface bolt for sale, brand-new and used.

eBay Template v2.5

Steel 7-Shelf Shelving Unit, 750 lb Capacity Standing seven-shelf unit made of steel to support a 107-lb. per shelf capacity and to support a 750-lb. total capacity Lipped shelves can be installed with the lip facing downwards for a flat surface or with the lip facing upwards to create a tray with shallow edges for holding cans, books, and similar items Corner post holes are punched at 1-1/2" intervals for precise adjustment to shelf height Gray enamel finish resists corrosion

Up for auction Is a new Fort Knox Pistol Case Safe. This is brand new but was only opened to verify the contents. HERE ARE SOME SPECS.

Replacement locking "bullets" for your Delta Unisaw vertical and tilt adjustment knobs. This sale is for a pair of these brass/bronze alloy bullets to repair the locking mechanism for one blade position control shaft of your Unisaw. When you are restoring your vintage Unisaw don't overlook replacing those worn and deformed brass plugs that provide the interfernce fit locking of the handwheels that adjust both the vertical blade height and the tilt angle.

ITW Red Head Drop In Anchor1/4"-20 BoltCatalog No RL-14Drill size 3/8" Box is opened with storage wear and 106 quantity anchors

NEW! Garage Storage Galvanized Steel Wall Tool Organizer Pegboard - FREE SHIP! Item Condition Brand new, factory sealed Product Features Over 10 times stronger than conventional pegboard, more strength equals more storage.

When you want one of the best impact wrenches made, then you are looking at the Ingersoll Rand 3940B2Ti 1" square drive air impact wrench delivering 2500 FT LB of maximum torque. These impact wrenches are Made in the USA with with the highest quality materials in the world, including a titanium hammer case. These units were built to last for many years of service!

1 5/16" Heavy Duty Track Bolt Socket made by Caterpillar. The name Caterpillar is not found on the socket, but the part number is consistent with the Cat part number. Uses a 1" drive ratchet.

NO RESERVE. FREE DELIVERY: MAY BE ARRANGED; IF BUYER IS IN THE SELLER'S DELIVERING AREA OF NORTHEAST PENNSYLVANIA.

Science Lab Tables24 wide by 60 long by 36 inches high. Overall the tops are in good condition, there may be minor scratches. Some of the wooden frames have writing on them but it could probably be sanded out.

each measures 3 5/8" inches tall, 5 3/8 inches along one edge, 4 1/8 Inches along the other edge, steel is about 1/4" thick, each weighs just over 2 pounds and has 6 bolt holes

each measures 3 5/8" inches tall, 5 3/8 inches along one edge, 4 1/8 Inches along the other edge, steel is about 1/4" thick, each weighs just over 2 pounds and has 6 bolt holes

MODIFIED UNISAW TABLE WING - ADDS ROUTER TABLE CAPABILITY TO YOUR EXISTING TABLE SAW. The heavy cast iron extension wing, when combined with the mass of your vintage Unisaw, makes a great router table. This sale is for one (1) Unisaw extension wing, modified as described below, to accept a Bosch router, adding a very stable and functional router table on the far right side of your Delta table saw.

The V40xEBxCD is designed for primary and secondary exits that require an alarmed panic device. The 100dB alarm will sound when someone attempts to exit, alerting management to the unauthorized exit. the V40xEBxCD (installed mortise cylinder - sold separate ) • Secure ins

Designed to slowly ease the wheel arch away allowing for larger wheels to be fitted Increase tire to wing clearance, flare arches or repair wheel arch collision damage with this professional reforming tool It bolts directly to the hub flange, with elongated holes in the adapter plate to fit all popular 4 and 5 bolt hubs Adjusts from 14" to 22 3/4" This is a simple device but we strongly recommend that a qualified body shop technician or a professional carry out the work