+ Post new Ad
HHIP 3901-5042 125MM Diameter D1-4 ER-40 Collet Chuck, US $152.49 – Picture 0
HHIP 3901-5042 125MM Diameter D1-4 ER-40 Collet Chuck, US $152.49 – Picture 0

Hhip 3901-5042 125mm Diameter D1-4 Er-40 Collet Chuck

US $152.49

  • Miami, FL, United States
  • Jul 12th
Open on mobile:
QR code
HHIP 3901-5042 125MM Diameter D1-4 ER-40 Collet Chuck Concentricity is . 0016" 125mm diameter Easily mount to a lathe with a D1-4 spindle Use with ER-40 collets Supplied with a wrench. HHIP 125mm Diameter D1-4 ER-40 Collet Chuck use with ER-40 collets. Concentricity is . 0016". 125mm diameter (D1). Easily mount to a lathe with a D1-4 spindle. Stud diameter is 5/8". D is 64mm. L is 42mm. Shipping We offer FREE shipping on all orders! We ship within Three business days of payment, usually sooner. We use a selection of shipping services such as UPS, FedEx, USPS etc. We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed. Local pickups and combined shipping options are not provided at this time. Return You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Payment We accept payment by any of the following methods: PayPal Please pay as soon as possible, as that will allow us to post your item to you sooner! Feedback Customer satisfaction is very important to us. If you have any problem with your order, please contact us and we will do our best to make you satisfied. Contact Us If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays. Please visit our eBay store to check out other items for sale! Thank you for shopping at our store.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
MPN Does not apply
Brand HHIP
Model Does not apply
UPC 769053088891
ISBN 0769053088891
EAN Does not apply

Directions

Similar products from Collet Chucks & Sets

0-5/32 Jacobs drill chuck 0-b model 0-532 capacity

0-5/32 Jacobs drill chuck 0-b model 0-532 capacity

  • Cromwell, Connecticut, United States
  • Jul 13th
WWODRUFF CUTTER LOT ASSORTMENT

WWODRUFF CUTTER LOT ASSORTMENT

  • Cromwell, Connecticut, United States
  • Jul 13th
MT5 to 5C Collet Sleeve w/Draw Tube Pilot

MT5 to 5C Collet Sleeve w/Draw Tube Pilot

  • Vale, Oregon, United States
  • Jul 13th
MT5 to 5C Lathe Spindle Collet Sleeve

MT5 to 5C Lathe Spindle Collet Sleeve

  • Vale, Oregon, United States
  • Jul 13th
5C Collet Nut For MT5 to 5C Draw Tube Sleeve

5C Collet Nut For MT5 to 5C Draw Tube Sleeve

  • Vale, Oregon, United States
  • Jul 13th
BRIDGEPORT MILLING MACHINE RIGHT ANGLE HEAD ATTACH WITH R8 ARBOR

BRIDGEPORT MILLING MACHINE RIGHT ANGLE HEAD ATTACH WITH R8 ARBOR

  • Cromwell, Connecticut, United States
  • Jul 13th
MOUNTZ TB TORQUE TOOL FOR COLLET NUT MTZ.0B.045.070 068140 LEMO

MOUNTZ TB TORQUE TOOL FOR COLLET NUT MTZ.0B.045.070 068140 LEMO

  • Las Vegas, Nevada, United States
  • Jul 13th
Rubber Air Blower Ball Pump Dust Cleaner for DSLR Camera Lens Keyboard Watch

Rubber Air Blower Ball Pump Dust Cleaner for DSLR Camera Lens Keyboard Watch

  • Shenzhen, China
  • Jul 13th
Techniks CAT40 Retention Knob Coolant 21007-15C Pull Stud 15 Degrees 10 Pcs

Techniks CAT40 Retention Knob Coolant 21007-15C Pull Stud 15 Degrees 10 Pcs

  • Columbus, Ohio, United States
  • Jul 13th
Techniks CAT40 Retention Knob 21007-15 Solid Pull Stud 15 Degrees 10 Pcs

Techniks CAT40 Retention Knob 21007-15 Solid Pull Stud 15 Degrees 10 Pcs

  • Columbus, Ohio, United States
  • Jul 13th
SOUTH BEND LATHE CBC-100NR Adjustable Collet Bushing Chuck Armature Repair Tool

SOUTH BEND LATHE CBC-100NR Adjustable Collet Bushing Chuck Armature Repair Tool

  • Yorktown, Virginia, United States
  • Jul 12th
Liboqiao Chuck Collet Tool Holder 40000RPM+ - ISO20-ER20-35MS

Liboqiao Chuck Collet Tool Holder 40000RPM+ - ISO20-ER20-35MS

  • Chillicothe, Missouri, United States
  • Jul 12th
SETTRU Collet Chuck w/ Fiine Adjustment 2-In 7-862-0505

SETTRU Collet Chuck w/ Fiine Adjustment 2-In 7-862-0505

  • Chillicothe, Missouri, United States
  • Jul 12th
HARDINGE 2” OC STEP CHUCK CLOSER ~ Not Threaded

HARDINGE 2” OC STEP CHUCK CLOSER ~ Not Threaded

  • Milford, Connecticut, United States
  • Jul 12th
HARDINGE 2” STEP CHUCK CLOSER w/ 2-3/16"-10 THREADED MOUNT

HARDINGE 2” STEP CHUCK CLOSER w/ 2-3/16"-10 THREADED MOUNT

  • Milford, Connecticut, United States
  • Jul 12th
HARDINGE 2” STEP CHUCK CLOSER w/ 2-3/16"-10 THREADED MOUNT Older Model

HARDINGE 2” STEP CHUCK CLOSER w/ 2-3/16"-10 THREADED MOUNT Older Model

  • Milford, Connecticut, United States
  • Jul 12th
HARDINGE 3” STEP CHUCK CLOSER without Threads

HARDINGE 3” STEP CHUCK CLOSER without Threads

  • Milford, Connecticut, United States
  • Jul 12th
HHIP 3901-5038 ER-40 Collet Chuck 132 mm Diameter x 42 mm Height

HHIP 3901-5038 ER-40 Collet Chuck 132 mm Diameter x 42 mm Height

  • Miami, FL, United States
  • Jul 12th
HHIP 3901-5041

HHIP 3901-5041

  • Miami, FL, United States
  • Jul 12th
KEILEOHO ER 32 Bloque de pinza cuadrada soporte de bloque de mandril de resor...

KEILEOHO ER 32 Bloque de pinza cuadrada soporte de bloque de mandril de resor...

  • Phoenix, AZ, United States
  • Jul 12th

People who viewed this item also vieved

NEW 10PAIR 1/8" PARALLEL SET AND 20 PAIRS 1/32" PARALLEL SET

NEW 10PAIR 1/8" PARALLEL SET AND 20 PAIRS 1/32" PARALLEL SET

  • Garden Grove, California, United States
  • Jan 30th
Precision 1-2-3 Blocks Matched Pair NEW

Precision 1-2-3 Blocks Matched Pair NEW

  • Chino, California, United States
  • Jan 30th
MACHINIST LATHE MILL Starrett # 567 V Block with Clamp in Box

MACHINIST LATHE MILL Starrett # 567 V Block with Clamp in Box

  • Morris Plains, New Jersey, United States
  • Jan 30th
NEW SURPLUS MOHAWK 3/4" DEAD CENTER .750" Shank X 4.50" OAL (5698-3462)

NEW SURPLUS MOHAWK 3/4" DEAD CENTER .750" Shank X 4.50" OAL (5698-3462)

  • Fairfield, Iowa, United States
  • Jan 30th
HEAVY DUTY LIVE CENTER 3MT SHANK

HEAVY DUTY LIVE CENTER 3MT SHANK

  • Norwalk, California, United States
  • Jan 30th
Bench Centers

Bench Centers

  • Claremont, New Hampshire, United States
  • Jan 30th
NEW 6 INCH LATHE 4 INCH 3 JAW CHUCK+REV JAWS+KEY 1-8 THREAD FITS ATLAS CRAFTSMAN

NEW 6 INCH LATHE 4 INCH 3 JAW CHUCK+REV JAWS+KEY 1-8 THREAD FITS ATLAS CRAFTSMAN

  • Niles, Michigan, United States
  • Jan 30th
KITAGAWA CNC LATHE MODEL VARIANT TURN

KITAGAWA CNC LATHE MODEL VARIANT TURN

  • Denver, Colorado, United States
  • Jan 30th
Kanetsu Electro-Magnetic Chuck

Kanetsu Electro-Magnetic Chuck

  • Louisville, Kentucky, United States
  • Jan 30th
CINCINNATI TOOL CO. NO. 52 SUPER JR. C-CLAMP - 1-1/4" CAPACITY

CINCINNATI TOOL CO. NO. 52 SUPER JR. C-CLAMP - 1-1/4" CAPACITY

  • Chino, California, United States
  • Jan 30th
10 USED DE STA CO Model # 601 Forward Action Straight-Line Toggle Clamps i

10 USED DE STA CO Model # 601 Forward Action Straight-Line Toggle Clamps i

  • Chicago, Illinois, United States
  • Jan 30th
Parallel Clamps, (2) Brown & Sharpe No. 754-E, Machinist Parallel Clamps, USA

Parallel Clamps, (2) Brown & Sharpe No. 754-E, Machinist Parallel Clamps, USA

  • Saunderstown, Rhode Island, United States
  • Jan 30th
Burnerd Precision Multisze Collets EC2 to EC13

Burnerd Precision Multisze Collets EC2 to EC13

  • Woodstock, Illinois, United States
  • Jan 30th
3 Porst Bros Mfg Co Collets 3/8, 7/16, 1/2"

3 Porst Bros Mfg Co Collets 3/8, 7/16, 1/2"

  • Eudora, Kansas, United States
  • Jan 30th
5/8"-11 Workholding Studs

5/8"-11 Workholding Studs

  • Chesapeake, Virginia, United States
  • Jan 30th
Vacuum Table VT-W1 8" x 12"

Vacuum Table VT-W1 8" x 12"

  • Nashville, Tennessee, United States
  • Jan 30th
Vacuum Table VT-W3 16" x 24"

Vacuum Table VT-W3 16" x 24"

  • Nashville, Tennessee, United States
  • Jan 30th
Vacuum Table VT-D1 8" x 12"

Vacuum Table VT-D1 8" x 12"

  • Nashville, Tennessee, United States
  • Jan 30th
Makita No.51 T-shank Jigsaw Blade Made in Japan New Model 792428-3 #51

Makita No.51 T-shank Jigsaw Blade Made in Japan New Model 792428-3 #51

  • Los Angeles, California, United States
  • Jan 30th
JET JLP-075A-15, 0.75 Ton Lever Hoist with 15' Lift 187608 Rachet Type

JET JLP-075A-15, 0.75 Ton Lever Hoist with 15' Lift 187608 Rachet Type

  • Los Angeles, California, United States
  • Jan 30th
T-SLOT CLEANER

T-SLOT CLEANER

  • Chino, California, United States
  • Jan 30th
Cincinnati - Gilbert Serial #AL-60-696 INDEX TABLE

Cincinnati - Gilbert Serial #AL-60-696 INDEX TABLE

  • Cayuga, New York, United States
  • Jan 30th
Eimeldingen WG30-104/105 Precision Rotary Table 118.11" Wide

Eimeldingen WG30-104/105 Precision Rotary Table 118.11" Wide

  • Wyoming, Michigan, United States
  • Jan 30th
6 INCH HORIZONTAL/VERTICAL ROTARY TABLE TAIWANESE (3900-2316) - MADE IN TAIWAN

6 INCH HORIZONTAL/VERTICAL ROTARY TABLE TAIWANESE (3900-2316) - MADE IN TAIWAN

  • Chino, California, United States
  • Jan 30th
Machinists Vice-Jaw Opens to 2 1/8" & is 2 1/2" Wide-Smooth Operation

Machinists Vice-Jaw Opens to 2 1/8" & is 2 1/2" Wide-Smooth Operation

  • Durand, Illinois, United States
  • Jan 30th
VINTAGE COLUMBIAN No. 606 M2 SWIVEL BASE HEAVY DUTY 6" JAWS BENCH VISE U.S.A.

VINTAGE COLUMBIAN No. 606 M2 SWIVEL BASE HEAVY DUTY 6" JAWS BENCH VISE U.S.A.

  • La Mesa, California, United States
  • Jan 30th
QUICK GRIP 4" MACHINE VISE 90* FLIP MADE NY NY MONTGOMERY TOOLS 4GM

QUICK GRIP 4" MACHINE VISE 90* FLIP MADE NY NY MONTGOMERY TOOLS 4GM

  • Bristol, Connecticut, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies