HP - AGILENT 8510B NEWORK ANALYZER W/ DISPLAY & 8514B TEST SET! COMPLETE SYSTEM, US $5,500.00 – Picture 0

HP - AGILENT 8510B NEWORK ANALYZER W/ DISPLAY & 8514B TEST SET! COMPLETE SYSTEM, US $5,500.00 – Picture 1

HP - AGILENT 8510B NEWORK ANALYZER W/ DISPLAY & 8514B TEST SET! COMPLETE SYSTEM, US $5,500.00 – Picture 2

HP - AGILENT 8510B NEWORK ANALYZER W/ DISPLAY & 8514B TEST SET! COMPLETE SYSTEM, US $5,500.00 – Picture 3

HP - AGILENT 8510B NEWORK ANALYZER W/ DISPLAY & 8514B TEST SET! COMPLETE SYSTEM, US $5,500.00 – Picture 4

HP - AGILENT 8510B NEWORK ANALYZER W/ DISPLAY & 8514B TEST SET! COMPLETE SYSTEM, US $5,500.00 – Picture 5

Hp - Agilent 8510b Nework Analyzer W/ Display & 8514b Test Set! Complete System

US $5,500.00

Albuquerque, New Mexico, United States
Jan 29th

Open on mobile:
QR code

In these bad economic times, get more “bang”, for your money with tested, working and calibrated test equipment from AAA Equipment Resources INC. I AM A WELL KNOWN SELLER AND BUYER OF ALL WORKING AND CALIBRATED TEST EQUIPMENT. WE OUR ONE OF EBAYS LARGEST INDEPENDENT PROVIDER OF GLOBAL CALIBRATED AND REPAIR TEST EQUIPMENT FOR OVER TWELVE YEARS. I AM A MAN OF MY WORD. OUR GOAL IS TO EXCEED CUSTOMER’S EXPECTATIONS, SO YOU WILL BUY FROM US AGAIN. YOU ARE BUYING A PROFESSIONALLY TESTED AND CHECKED OUT AS FULLY FUNCTIONAL, HP - AGILENT 8510B NEWORK ANALYZER WITH DISPLAY & 8514B TEST SET! THE COMPLETE SYSTEM WITH CABLES! The Display has Option 010 (??) I do not know what that is for. It was just calibrated. The Due date is 04/04/15. The unit is in good to great cosmetic condition. It may have a small scratch here or there. All buttons, knobs, and switches are good and intact. The serial #s are Display = 2514A01274, 8510B = 2546A01302, and 8514B = 2820A00414. Will works with 120 & 240 voltage. We always re-check the item before we ship it. This makes sure the item is working, when it leaves my shop. The 8510B and 8514B do not have any options marked. With the 8514B, the HP - Agilent 8510B network analyzer will only work to 20 GHz. A different S - Parameter Test Set, will give you a different frequency range. NOTE: YOU NEED TO HAVE EITHER THE HP - AGILENT 8511, 8512, 8513, 8514 OR 8515 S - PARMETER TEST SET AND THE HP - AGILENT 8340, 8341, OR HP - AGILENT 8350B WITH RF PLUG IN GENERATORS FOR THIS NETWORK ANALYZER TO WORK (AT ALL). IT WILL NOT WORK WITHOUT THESE OTHER TWO UNITS. FOR THIS ONE TO WORK, YOU WILL NEED A HP - AGILENT 8340, 8341, OR HP - AGILENT 8350B SWEP GENERATOR WITH RF PLUG IN. THE NETWORK ANALYZER WILL ONLY WORK TO THE FREQUENCY OF THE GENERATOR AND S - PARMETER TEST SET, YOU OUR USING! WE WILL RE-CALIBRATED THE UNIT BEFORE SHIPPING AND A NIST TRACEABLE CALIBRATION CERTIFICATE, WILL BE PROVIDED AFTER ITEM IS RECEIVED AND IS ACCEPTED AS WORKING WITH IN SPECS. WE WILL MAIL OUT THE CERTIFICATE. THE RE-CALIBRATION DELAYS THE SHIPPING TIME THREE (3) DAYS. The 8510 Series microwave vector network analyzers provide a complete solution for characterizing the linear behaviour of either active or passive networks over the 45 MHz to 40 GHz frequency range. A complete system comprises the HP 8510B network analyzer, an S-parameter test set, and a compatible RF source. Several S-parameter test sets are available for the 8510B. The 8514B, 8515A, and 8516A test sets have a dual port architecture that develops a separate reference channel for each incident port. RF switching is done with a single built-in electronic switch. For active device measurements, the test sets include the ability to apply DC bias (external) to the test port center conductors. The recommended system source for the 8510B is the 8360 synthesized sweeper. It provides 1 Hz frequency resolution, phase-locked narrowband sweeps, and fully synthesized start frequencies for broadband ramp sweeps. All 8360-series synthesized sweepers are compatible with the 8510B; however, the 83621A (20 GHz) and 83631A (26 GHz) models are optimized for 8510B system operation. Both the 8340-series synthesized sweeper and 8350B-series sweep oscillators are also compatible with the 8510B. The HP - Agilent 8510B Vector Network Analyzer continues to provide the best performance to meet your new design and test challenges. With unmatched accuracy and convenience, the HP - Agilent 8510B makes broadband measurements from 45 MHz to 40 GHz in coax, and to 110 GHz in waveguide bands. The HP/Agilent 8510B network analyzer measures the magnitude, phase and group delay of two-port networks to characterize their linear behavior. FEATURES and SPECIFICATUIONS: •45 MHz to 40 GHz / 100 GHz •Real Time error-corrected measurements •60 dB effective directivity and source match •80 dB to 100 dB dynamic range •Resolution to 0.001 dB, 0.01 degree, 0.01 ns •GPIB. For more information and Specs: http://www.mrtestequipment.com/getfile.php?s=Agilent+8510B+Network+Analyzer+Data+Sheet.pdf The HP - Agilent 8514B S-Parameter Test Set provides the capability to measure all four S-parameters of a two port device with a single connection over the 45 MHz to 18 GHz frequency range. The S-parameter test set architecture is ideal for measuring two-port devices where it is not convenient to physically reverse the device to measure the reverse parameters, or for networks that need to be adjusted while being measured with full error-correction employed. The test ports have rugged precision 7-mm connectors and may be adapted to other connector interfaces with the appropriate precision adapters. Along with an integrated, four-channel frequency converter, the test set includes two 90-dB step attenuators for changing the incident power level at the test port and two bias networks for applying DC bias to the test port center conductor in active device test applications. For more information and Specs on the HP 8514B test set: http://www.teknetelectronics.com/DataSheet/HP_Agilent/HP_8512A.pdf I HAVE THE HP - AGILENT 8753A, HP - AGILENT 8753C, AND OTHER NETWORK ANALYZER OF DIFFERENT EBAY SALES. TAKE A LOOK AND SEE IF YOU NEED ANYTHING ELSE! Reasonable offers are always welcome! REASONABLE ONES! You get the HP - AGILENT Display, HP - AGILENT 8510B network unit, HP - AGILENT 8514B S- Parameter test set, cable from display to network analyzer(bottom unit), cable from network unit to S- Parameter test set, Two (2) HPIB cables, Manuals on CD, and Three (3) power cords. NO more. Again, it was tested and works fine! GET THIS GREAT WORKING CALIBRATED, HP - AGILENT 8510B NEWORK ANALYZER WITH DISPLAY & 8514B TEST SET! THE COMPLETE SYSTEM WITH CABLES TODAY! Buy from an experienced seller. Buy with confidence as feedback speaks for itself. Buyer pays $ 180.00 shipping in 48 states with insurance. I WILL NOT SHIP TO BRAZIL, BY USPS INTERNATIONAL PRIORITY MAIL! PAYPAL, Bill Me Later, bank check, and personal/business check (10 day hold) is accepted. Wire transfers are good too. I do not take credit cards myself. I only take credit cards through PAYPAL. I will not use your UPS account to ship the item on. There are too many problems with them charging me for the shipment and not the account, we sent it on! I do all my international wrapping, boxing, paper work, and shipping myself. I can do it cheaper then EBAY or any other packing company! I get the best and cheapest shipping company available, at the time. There will be a $5.00 International buyer fee for paper work. There are some countries that have a 79 inch max girth box size with USPS. Some bigger items cannot fit this size box, so we have to send it FEDEX Econ. I get a discount and would pass this discount on to the buyer. My phone # is 505-235-5613. This is my website for more equipment you may need: http://aaaequipmentresourcesinc.com/index.html Yes, you can always find test equipment on Ebay that cost less than my equipment, but it will NOT have the same quality, NIST Traceable Calibration, or 12 years track record on Ebay. These are just people that sell, to make a quick buck today, then gone tomorrow. You choose? We know you have a choice on which items you buy, so THANKS for your time and for buying from AAA Equipment Resources INC. Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	HP/AGILENT
Country/Region of Manufacture	United States
Model	8510B/ 8514B