+ Post new Ad
Hydramax 4st, US $493.62 – Picture 0
Hydramax 4st, US $493.62 – Picture 0

Hydramax 4st

US $493.62

  • Monmouth, Oregon, United States
  • Jan 30th
Open on mobile:
QR code
The Hydramax Workholding System The Hydramax Workholding System is designed to allow multiple parts, with variations in size to be secured in a Kurt vise simultaneously. Problems usually associated with attempting to hold multiple parts in one vise are virtually eliminated. Save time and money without the hassles of broken cutters, scraped parts, or damaged fixtures. Also, fragile parts can be held securely, without crushing pressure. The system includes two jaws both equipped with our FastBack washer mounting plates. The solid jaw is replaced by a simple machinable aluminum soft jaw, while the moveable jaw is replaced by the Hydramax jaw. The Hydramax jaw incorporates several independently acting clamping pistons. These pistons compensate for variations in the parts being held. The self-contained hydraulic chamber within the jaw equalizes the pressure of the individual pistons, allowing the jaw to adapt to the parts being held for machining. Multiple systems are available with variations in the size and number of hydraulic pistons within the self-contained jaw unit. For inside diameter parts holding; look at the X-Pander System at the bottom of this page. FastBack Interchange System Based around the patented FastBack Bolt, this quick-change system allows the jaw to be changed in 3 strokes! This greatly increases productivity by reducing vise change setup time. rnrnThe jaws change easily without opening the vise or fastening bolts more than a single turn. A pair of vise jaws changes out in under a minute with the vise open or closed. Using a supplied 6-inch hex wrench to reach through the vise body, the FastBack Bolt is loosened, or tightened from the reverse sides of the vise. The system saves valuable set-up time on return jobs because it allows the jaws to be fastened while the parts are already held in the vise. 1 - Hydramax 5ST Jaw 1 - FastBack Soft Jaw 2 - FastBack Washer Plates 4 - FastBack Bolts 1 - FastBack Wrench

Directions

Similar products from Fittings & Plates

Aluminum Pro Channel 3/4 x 3/4 x 3/4 x 48 in, 1/16 in thick, .75 in, U, C, .75

Aluminum Pro Channel 3/4 x 3/4 x 3/4 x 48 in, 1/16 in thick, .75 in, U, C, .75

  • Old Fort, North Carolina, United States
  • Jan 30th
5 x 7" Tilting Table for Milling Machines

5 x 7" Tilting Table for Milling Machines

  • Schaumburg, Illinois, United States
  • Jan 30th
(4) JERGENS 20mm SHANK BALL LOCKS FOR MOUNTING SYSTEM # 49601

(4) JERGENS 20mm SHANK BALL LOCKS FOR MOUNTING SYSTEM # 49601

  • Chino, California, United States
  • Jan 30th
LARGE 23" STRAIGHT EDGE BAR FOR SET UP MACHINIST LATHE TOOL

LARGE 23" STRAIGHT EDGE BAR FOR SET UP MACHINIST LATHE TOOL

  • Lake Hiawatha, New Jersey, United States
  • Jan 30th
DIVIDING PLATES FOR 8 INCH VERTEX SUPER SPACER - MADE IN TAIWAN (3900-2396)

DIVIDING PLATES FOR 8 INCH VERTEX SUPER SPACER - MADE IN TAIWAN (3900-2396)

  • Chino, California, United States
  • Jan 30th
SINE PLATE 6 1/2" X 6 1/2"

SINE PLATE 6 1/2" X 6 1/2"

  • Bellmawr, New Jersey, United States
  • Jan 30th
Ridgid Jewel # 1A pipe welding Clamp 15'"long

Ridgid Jewel # 1A pipe welding Clamp 15'"long

  • Niles, Michigan, United States
  • Jan 30th
MACHINIST LATHE MILL TOOLS NICE ANGLE / SINE PLATE with MACHINIST SET UP PLATE

MACHINIST LATHE MILL TOOLS NICE ANGLE / SINE PLATE with MACHINIST SET UP PLATE

  • Lake Hiawatha, New Jersey, United States
  • Jan 30th
12 Pc R8 Collet Set Metric 3mm to 22 mm High Precsion for Bridgeport 12 Piece

12 Pc R8 Collet Set Metric 3mm to 22 mm High Precsion for Bridgeport 12 Piece

  • Huntington Beach, California, United States
  • Jan 30th
Hartford Super Spacer 12" Master Index Plate 45 Notch

Hartford Super Spacer 12" Master Index Plate 45 Notch

  • Uxbridge, Massachusetts, United States
  • Jan 30th
BRAND NEW 5C 5 INCH COLLET CHUCK D1-8

BRAND NEW 5C 5 INCH COLLET CHUCK D1-8

  • Garden Grove, California, United States
  • Jan 30th
5C H/V ANGLE COLLET FIXTURE & 5pc 5C HEX & SQUARE COLLET BLOCK SET & 6pc COLLET

5C H/V ANGLE COLLET FIXTURE & 5pc 5C HEX & SQUARE COLLET BLOCK SET & 6pc COLLET

  • Garden Grove, California, United States
  • Jan 30th
5C H/V ANGLE COLLET FIXTURE & 5pc 5C HEX & SQUARE COLLET BLOCK SET & 15pc COLLET

5C H/V ANGLE COLLET FIXTURE & 5pc 5C HEX & SQUARE COLLET BLOCK SET & 15pc COLLET

  • Garden Grove, California, United States
  • Jan 30th
5pc 5C HEX & SQUARE COLLET BLOCK SET & 6pc 5C COLLET SET

5pc 5C HEX & SQUARE COLLET BLOCK SET & 6pc 5C COLLET SET

  • Garden Grove, California, United States
  • Jan 30th
5pc 5C HEX & SQUARE COLLET BLOCK SET & 15pc 5C COLLET SET 1/8-1" BY 16ths

5pc 5C HEX & SQUARE COLLET BLOCK SET & 15pc 5C COLLET SET 1/8-1" BY 16ths

  • Garden Grove, California, United States
  • Jan 30th
FACE PLATE 12" DIAMETER for LATHE

FACE PLATE 12" DIAMETER for LATHE

  • Baltimore, Maryland, United States
  • Jan 30th
FACE PLATE 10" DIAMETER FOR LATHE

FACE PLATE 10" DIAMETER FOR LATHE

  • Baltimore, Maryland, United States
  • Jan 30th
AMERICAN 10" FACE PLATE for LATHE

AMERICAN 10" FACE PLATE for LATHE

  • Baltimore, Maryland, United States
  • Jan 30th
C Brallion 18.25" x 6" x 2" Magnetic Chuck

C Brallion 18.25" x 6" x 2" Magnetic Chuck

  • Johnson City, New York, United States
  • Jan 30th
Vacuum table VT10060SEAL CNC CHUCK Engraving or Milling

Vacuum table VT10060SEAL CNC CHUCK Engraving or Milling

  • Exeter, Rhode Island, United States
  • Jan 30th

People who viewed this item also vieved

HARDINGE 9/16" HEX MODEL 215 COLLET MORE COLLETS AND TOOLING LISTED LOT C12035

HARDINGE 9/16" HEX MODEL 215 COLLET MORE COLLETS AND TOOLING LISTED LOT C12035

  • Dayton, Ohio, United States
  • Mar 11th
HARDINGE 1-1/2" HEX MODEL 215 COLLET MORE COLLETS AND TOOLING LISTED LOT C12032

HARDINGE 1-1/2" HEX MODEL 215 COLLET MORE COLLETS AND TOOLING LISTED LOT C12032

  • Dayton, Ohio, United States
  • Mar 11th
HARDINGE 1" HEX MODEL 215 COLLET MORE COLLETS AND TOOLING LISTED LOT C12033

HARDINGE 1" HEX MODEL 215 COLLET MORE COLLETS AND TOOLING LISTED LOT C12033

  • Dayton, Ohio, United States
  • Mar 11th
Beam Clamp 4 Ton

Beam Clamp 4 Ton

  • Oxford, Georgia, United States
  • Apr 28th
(3) Heavy Duty 8" Industrial C-Clamps, Wilton 808 & 408, Hargrave 8 No. 44 USED

(3) Heavy Duty 8" Industrial C-Clamps, Wilton 808 & 408, Hargrave 8 No. 44 USED

  • Cornell, Illinois, United States
  • Apr 29th
2Pcs 30Kg Vertical Toggle Clamp Metal Hand Tool Holding Capacity GH-13009 SHPT

2Pcs 30Kg Vertical Toggle Clamp Metal Hand Tool Holding Capacity GH-13009 SHPT

  • Shenzhen, China
  • Apr 29th
Lathe Chuck Drive Plate Face Dogs Armstong Atlas 10" South Bend Logan 1-1/2-8

Lathe Chuck Drive Plate Face Dogs Armstong Atlas 10" South Bend Logan 1-1/2-8

  • Roselle, Illinois, United States
  • May 10th
Lathe chuck

Lathe chuck

  • Fairmont, North Carolina, United States
  • May 10th
Kitagawa HOH-06K Lathe Chuck CNC

Kitagawa HOH-06K Lathe Chuck CNC

  • Gainesville, Florida, United States
  • May 10th
toolmakers cube

toolmakers cube

  • Bronson, Florida, United States
  • May 10th
Palmgren Vice 4" Jaw 1-3/4"Deep 4" Wide "20% off remaining time"

Palmgren Vice 4" Jaw 1-3/4"Deep 4" Wide "20% off remaining time"

  • Westchester, Illinois, United States
  • May 11th
Columbian Bench Vice No 04M2 - 4" Bench Vise w/Swivel Mount Base

Columbian Bench Vice No 04M2 - 4" Bench Vise w/Swivel Mount Base

  • Sharon Springs, Kansas, United States
  • May 11th
IDEAL MB4 Live Center Metal Lathe Machinist Tool

IDEAL MB4 Live Center Metal Lathe Machinist Tool

  • Matamoras, Pennsylvania, United States
  • Jun 29th
Universal Tailstock Center Set with Base & Carbide Tips "Priced To Sell"

Universal Tailstock Center Set with Base & Carbide Tips "Priced To Sell"

  • Rochester, New York, United States
  • Jun 29th
Live Center MT3 Medium Duty Roller Bearings

Live Center MT3 Medium Duty Roller Bearings

  • Atwood, Tennessee, United States
  • Jun 29th
NOS RECORD MARPLES UK Made 18" Tail Vise BENCH SCREW No. 165 ITEM #WR12cA3

NOS RECORD MARPLES UK Made 18" Tail Vise BENCH SCREW No. 165 ITEM #WR12cA3

  • Perth, Ontario, Canada
  • May 30th
10 - 5/32" Wingnut Clecos - Genuine Kwik-Lok Cleco Fasteners with 0-1/2 Grip

10 - 5/32" Wingnut Clecos - Genuine Kwik-Lok Cleco Fasteners with 0-1/2 Grip

  • Weatherford, Texas, United States
  • May 30th
RIX PNEUMATIC DEUBLIN COUPLING ROARY JOINT UNION HYDRAULIC EES-2P03 15514 new

RIX PNEUMATIC DEUBLIN COUPLING ROARY JOINT UNION HYDRAULIC EES-2P03 15514 new

  • toronto, ontario, Canada
  • May 30th
10-1/2 INCH UNIVERSAL DIVIDING HEAD SET (3800-5815) - MADE IN TAIWAN

10-1/2 INCH UNIVERSAL DIVIDING HEAD SET (3800-5815) - MADE IN TAIWAN

  • Chino, California, United States
  • Jun 3rd
TSUDAKOMA 4TH Axis Rotary Table RNCV-201R

TSUDAKOMA 4TH Axis Rotary Table RNCV-201R

  • Valley View, Pennsylvania, United States
  • Jun 3rd
10" precision horizontal and vertical rotary table

10" precision horizontal and vertical rotary table

  • Norcross, Georgia, United States
  • Jun 3rd
MACHINIST TOOLS MILL LATHE Machinist Tool Makers Ground Set Up Block Fixture

MACHINIST TOOLS MILL LATHE Machinist Tool Makers Ground Set Up Block Fixture

  • Morris Plains, New Jersey, United States
  • Jun 3rd
Starrett 54C hold downs Set of 2

Starrett 54C hold downs Set of 2

  • West Islip, New York, United States
  • Jun 3rd
Starrett 54A hold downs Set of 2

Starrett 54A hold downs Set of 2

  • West Islip, New York, United States
  • Jun 3rd
SIMPLICITY MISSES SKIRTS PANTS-14-16-18-20-22

SIMPLICITY MISSES SKIRTS PANTS-14-16-18-20-22

  • Hickory Hills, Illinois, United States
  • Jun 9th
"Winter Cat Sampler Counted Cross Stitch Kit-8""X16"" 14 Count"

"Winter Cat Sampler Counted Cross Stitch Kit-8""X16"" 14 Count"

  • Hickory Hills, Illinois, United States
  • Jun 9th
"Cubics Platina Fixed Circular Needles 24""-Size 9/5.5mm"

"Cubics Platina Fixed Circular Needles 24""-Size 9/5.5mm"

  • Hickory Hills, Illinois, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies