2004 Wauseon 1003 End Former Three Hit Hydraulic End Former SAE J1453 ORFS Tooling for 3/8" OD Tubing SAE J533 37 Degree Double Flare Tooling for 3/8" OD Tubing Automatic Oiling System Foot Switch Designed for most endforms up to 5/8" dia. x .049 wall steel Clamp Block Opening: 1.5" Clamp Block Dimensions: 1.5"W x 2.75"H x 4"L Punch Dimensions: .9375" dia. x 2.625" max.
New SPX Power Team HS2000 One Ton Hydraulic Spreader Features HS2000 1 ton capacity hydraulic spreader Full 2000 lb. capacity at 10,000 psi Can be dead-ended at 4" spread under full load! High Strength alloy steel forged upper and lower jaws.
(2) Rocheleau Model CS-1 Continuous Extrusion Blow Molding Machine Single Station Dual Head Hydraulic - Modular Power Unit • Dual pressure compensating pumps, one for
This is a 4 cubic foot JWI center feed 630 mm gasketed Automatic Hydraulic 4 Cubic Foot filter press. The press has 14 plates and they have 32mm cake thickness automatic hydraulics center feed with four corner returns (note picture of one of the plates) for flow configuration. Here are some details:
The wall mounted flowmeter is based on transit-time flow measurement principle. It measures flow rate of liquid in a closed pipe by using a pair of clamp-on or wetted ultrasonic transducers. In general, the liquid should be full of pipe, and should contain no or small amount of particles or air bubbles.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.