12V AUXILIARY PWR UNIT HYDRAULIC POWER UNIT, Hydraulic Power Units; Maximum PSI: 2,500.00; Voltage: 12 VDC; GPM: 1.30; Amperage Rating: 230; Port Size: 9/16-18 SAE; Length: 10.470 (Decimal Inch)It is in great condition, used very little. Never had a problem working. This is a bundle.
Description for Bell & Gossett 102218 Overview The Series 100 is a leader in applications such as hydronic heating and domestic hot water circulation, with over 10 million units installed. Series 100's three-piece, oil lubricated design provides for easy field service with bearings, shaft and seal all housed in an assembly which can be easily repaired or replaced.
Oil pump was used in a Carrier 19C machine(size 7 compressor) with R-11 refrigerant and pumped R&O 68 Hydraulic fluid. Rebuilt/rewound installed for 11 hours before chiller was replaced, parted out and hauled away. Motor is 480v, part number KK04YZ-012.
I have a Teel hydraulic pump model number 1V377 direct mounted to a Dayton electric motor 1.5 hp. model number 1K0828 single phase 115v & 230v also a Newco Fabrication 10 gal. power unit tank model number 6Z152.
(one) Pump and motor , 7 1/2 hp , 230/460 vac Reliance XE motor , 1750 rpm , Vescor pump adapter. Pump is believed to be a model H49AA2AK Parker , 3/4 " ports , gear motor , 8 gpm , 1000 psi . Unused .
this is unit number 2 we have another unit listed for less money. unit is used for room slide outs can have two rooms with one switch one slides out and then the other one. unit is currently in one of my rental units will final test unit before shipping, it is in like new condition, used very little.
unit is used for room slide outs can have two rooms with one switch one slides out and then the other one. unit is currently in one of my rental units will final test unit before shipping, it is in like new condition, used very little. Used Dewald Hydraulic Pump Reversible pump and motor assembly *** ALL USED ITEMS AND PARTS ARE ALWAYS SOLD AS / IS WITHOUT WARRANTY
The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.
FOR MORE INFORMATION ABOUT OUR PUMPS, SEARCH REDLINEPUMPS ON THE WEB OR CALL 1-605-881-3473. Bid with confidence. We have a money back return policy if your not satisfied.
1/8 HP 110V CENTRIFUGAL IMMERSION PUMP-GRAYMILLS Immersion & Suction Applications Immersion Pumps (IMV-Style) No bearings, seals, or packing are immersed in liquid, making them ideal for pumping liquids containing fine contaminants. Suction Pumps (IMS-Style) They should not be used to circulate fluids containing fine contaminants. Not recommended for applications requiring the circulation of liquids containing large amounts of foreign matter.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.