High power 1W to 1.5W 445nm laser diode pull from Casio XJ Series projector with near 800 hrs on it. Which is nothing really as these diodes have a 20,000 hr. lifetime.
Unusual and I'm sure pricey just to make these. These are 1/2 mirrors or D mirrors (actually more like 2/3 mirrors). Used for beam combining and splitting as the coating goes right to the very edge.
Unusual and I'm sure pricey just to make these. These are 1/2 mirrors or D mirrors (actually more like 2/3 mirrors). Used for beam combining and splitting as the coating goes right to the very edge.
High power 2W to 2.5W 445nm laser diode pull from Casio XJ Series projector with 689 hrs on it. (I decided to add a pic of the hours projected on the wall before I destroy the projector). 689 hrs is nothing really as these diodes have a 20,000 hr.
MOOSE TRADING LLC 251-650-2219 Federal Vitalite Amber Model 121S, 110 Volts, 60 Hz, Series B1, Lamp 40S11N. This has been tested and works! It is mounted to a metal plate, but can be removed.
This high quality and easy to use solder and flux paste makes soldering a breeze! Once you hit 212C degrees your done. CREE recommends to use this to mount their chips to PCB's.Manufacture date = May 20, 2014This new lot is # 119T-256PD429-216
This is a small high power collimator lens telescope in a nice x-y mount The optics are about 1/4 inch diameter. It was designed to collimate a 1000mw 635nm direct red laser diode and produce a round beam. It will work with red laser diodes up to 3W and 10W coherent Bars at 808nm without a problem.
TROLLEY, BUDGIT - 113534-33, RIGID MOUNT I-BEAM TROLLEYS (PUSH & HAND GEARED-1/2, 1, 2, 3 TON RATED LOADS), THIS ITEM IS NEW WITHOUT ORIGINAL MFG. PACKAGING., Ideal Item:IJP-085608, Bay Loc:R608.F.03, Pic: SAM_2442
TROLLEY, BUDGIT - OLP-10968, RIGID MOUNT I-BEAM TROLLEYS 2000LB, THIS ITEM IS NEW WITHOUT ORIGINAL MFG. PACKAGING., Ideal Item:IJP-085614, Bay Loc:R608.F.03, Pic: SAM_2443
TPI Corp HDM-I I-Beam Mount for Hd24-H & HD30-H, (GRAY), THIS ITEM IS NEW IN ORIGINAL MFG. PACKAGING., Ideal Item:ISN-1551, Bay Loc:R406.D.01, Pic: 1030210
DESCRIPTION:The Lumark Bandit provides a money-saving alternative to traditional incandescent and quartz lighting units. It utilizesefficient H.I.D. sources and a unique reflector system in a compact die-cast housing that is U.L.
This battery operated digital counter can be used with any sock knitting machine. Instructions are included on how to set it up easily. It can be mounted to a stand which would enable using an additional machine when placed in the same position on the stand.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.