i bolt for sale, brand-new and used.

Welcome to vintage prelude parts Here is all prelude bolts nuts washers clips screws all prelude hardware all have been soaked in a cleaner. . Thourghly cleaned approximately 2160 or more total hardware.

You are bidding on 10 pieces of a 3/4 x 8 inch taper bolt anchor. These anchors are new and galvanized. Please pay within 3 days of the end of the auction.

Nice Original Tailstock Assembly for a South Bend Heavy 10 10L Metal Lathe. Ram indicator shows some marks but is clear and legible. Oiler caps spring as they should.

Torchmate 3 CNC Plasma Table, Hypertherm 1000, Water Table, Tube Cutter, THC, Spare Parts This unit has roughly just 12 hours of cut time on it in total. You read that correctly. It is nearly brand new and has been stored in our storage bay.

This auction is for a New in the Original box with the Original Instructions Hansen Technologies Corporation 50-1095 Bonnet Kit for The 4-Bolt. 1" & 1-1/4" Shut off Valve. It i

For Auction - 1 - ISC Vertical Shaft Impactor (VSI) Model 55. I bought this crusher with the intent of producing a cubical non-polishing aggregate for a customer. While the crusher was at the shop being rebuilt, the customer was purchased by another producer with their own source.

GGP huck bolt gun. I really don't know to much about this gun. I know it works great.

Qty. 8 assorted vintage Nye square bolt die as follows: 1 @ 1/4-20 USS, 1 @ 5/16-18 USS, 1 @ 5/8-11 USS, 1 @ 7/8-9 USS, 1 @ 9/16-12 USS, 1 @ 1 1/8-7 USS, 1 Nye 3/4 Junior it is 2" x 2" square, 1 Nye Skip Tooth 3/4R.

This is a pair of insulated bolt cutters, 18" long. The maker is given as S, which I think stands for Salisbury. It also states that they are made in the USA.

FOR SALE IS A NEW HOBART D.C. AMMETER. MILITARY SURPLUS!

Up for auction is a brand new in

Lot of 4, Cage / Caging Bolt, Washer & Nut. RB-008 T-BOLT KIT. Worked on my M923 5 ton 6x6.

Cage / Caging Bolt, Washer & Nut. RB-008 T-BOLT KIT. Worked on my M923 5 ton 6x6.

This clamp pivots in the middle to hold a variety of different pipe configurations. It can hold up to a 2" pipe on the small side and a 4 1/2" pipe on the larger side. It only says "Japan" on it; no other identification.

Up for auction is a brand new in

THIS AUCTION IS FOR A NEW OLD STOCK KITAGAWA 8" BB08 CNC LATHE SUPER LARGE BORE POWER CHUCK with A2-6 MOUNT. 2.600 THRU HOLE. 5.250 BOLT CIRCLE (6 bolts x M12) MASTER JAW SERRATION 1.5mm x 60° JAW T NUT SIZE (top .551 x bottom .855) DRAW TUBE SIZE 74MM X 2.0MM THREAD I bought several crates of surplus tooling from a machine shop.

Here is a nice used chipping hammer. I think it is a Sullair MCH 2, but I'm not 100% sure. The tag is gone, but it is the same size, shape, and weight as the Sullair MCH2.