injection valve for sale, brand-new and used.

var itemNumber = window.ebayItemID ?

PGI High Pressure Injection Check Valve Fittings Stamped Part#V014 1/2" Threaded 2 3/4" Long 10,000 PSI NEW COMES AS SEEN IN PHOTO! GRAB IT TODAY!

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

Application:For industrial useBall Material:Chrome Plated BrassBody Finish:ChromeBody Inner Diameter:0.217"Body Length:1.535"Body Material:BrassConnection Type:Tube x Male NPTHandle Length:0.748"Handle Material:Glass Filled NylonHex Size:0.551"Operation Type:Lever HandleSeal Type:Buna-NSeat Material:PTFESize:1/4"Stem Material:Chrome Plated BrassStyle:Min

var itemNumber = window.ebayItemID ?

var itemNumber = window.ebayItemID ?

Ingersoll Rand ARO 1/2 Ton Air Hoist | 10 Ft. Lift | EYE Mount Used very little in our shop for lifting and placing molds on injection machines. Always inside.

Material Handling Equipment: Box Dumpers, Yard Ramps, Dock Lifts, Docks Seals and Shelters, Dock Levelers, Forklift Ramps, Gantry Cranes, Jib Cranes, Lift Tables!

I also have about 5 of these ball valves taken from the chiller system of a plastic injection company. Valves were installed new in 2001 and company operated for about 6 years. Valves are fully operational and in very good condition.

I also have about 100 of these ball valves taken from the chiller system of a plastic injection company. Valves were installed new in 2001 and company operated for about 6 years. Valves are fully operational and in very good condition.

I also have about 100 of these ball valves taken from the chiller system of a plastic injection company. Valves were installed new in 2001 and company operated for about 6 years. Valves are fully operational and in very good condition.

I also have about 100 of these ball valves taken from the chiller system of a plastic injection company. Valves were installed new in 2001 and company operated for about 6 years. Valves are fully operational and in very good condition.

INGERSOLL RAND ARO 1 Non Metallic Diaphragm Pump, Air Inlet NPT 1/4 Inch, Water Flow 35 GPM, NPTF Inlet/Outlet 1 Inch, Maximum Operating Pressure 120 PSI, Ball Material PTFE, Body Material Polypro, Check Seat Material Polypro, Diaphragm Material PTFE, Maximum Flow 53 CFM, Maximum Flow 44 GPM, Port Flange, Maximum Suspended Solids Diameter 1/8 Inch, Air Operated

I offer a Walchem pump. Model is EHE 36E1-VC Pump is in original box, but the box has been opened. You get the pump, tubing and foot valve is included, injection quill not included.