item aluminum extrusion for sale, brand-new and used.

This sale is for ONE previously owned COPY (original not a photocopy) of: Aluminium Ltd., SHAPE DESIGN MANUAL: ALUMINUM EXTRUSION, (USA 1964) 88 pages bound in a dirty hard cover. Please note that the pages are yellowing and that the name of a previous owner is written on the inside cover. This work includes data on aluminum extrusion, alloy selections, shape designs, assemblies, tolerances, and includes case studies and a section on shapes at work.

This Merritt Headache Racks fits a conventional tractor without a sleeper. Corresponding mounting kits available for purchase as well! Dyna-Tube Extrusion, aerodynamic radius corner shape, high strength — low weight.

Product Description

Multiple layer oval leaf filter disc measures 1.5" (short axis) x 3.0" (long axis) and consists of a total of four (4) individual woven stainless mesh screens in an aluminum binder and stacked as follows: 50-100-200-50 mesh. 200 mesh is .007" thick / 100 mesh is .012" thick / 50 mesh is .020 thick Screens were manufactured by Wayne Wire for a now closed Chevron polyolefin fiber manufacturing operation.

Hand Held Metabo Extrusion Welder, welds PVC, PE, PP . This welder is approximately one year old but only used for a few jobs,( less than 10). Its Ideal for the small shop or occasional jobs or site visits.

Reprap Wilson TS 3D Printer frame 2020 T-slot Aluminum Extrusion 4*400mm+2*330mm Description: The TS uses T-slot extrusions for the Y axis (as well as the frame, like the RS). Advantages of the TS: A single type of framing element is used (2020 extrusion), which simplifies the BOM. Better suited to longer Y-axis versions, because the extrusions have better rigidity over length than the M10 threaded rods.

Used these in the beginning of a project that got scrapped due to a design change. Some minor cosmetic damage, but structurally unstressed, just little scratches here or there or marks from screws and the t-slot nuts. 884mm with holes: 7.3mm diameter at 247.5mm, 447.5mm, 647.5mm from left side.

Used these in the beginning of a project that got scrapped due to a design change. Some minor cosmetic damage, but structurally unstressed, just little scratches here or there or marks from screws and the t-slot nuts. Unlike my other listing for extrusion of the same length, this does not have holes drilled through it.

More woodshop machinery photos at this link: http://www.pleasantstmachinery.com/ Pneumatic downcut extrusion saw. Fixed fence (always set at 90 degrees to base so you can use material infeed / outfeed conveyors). head and upper tables moves for miter +/- 45 degree.

Whitney aluminum x-axis extrusion for 3400. Approximately 26' long.

About us Shipping

80/20 Inc METRIC 30 Series 30mm x 30mm T-Slot Aluminum Extrusion, Part #30-3030 x 7771mm/30 3/8 in This extrusion profile features (1) open T-slot on each of the 4 smooth sides. Metric conversion: 25.4mm = 1" Purchased for a project, but did not need to use them. They appear completely new.

Hi, You are looking at our best seller LED sign, particularly designed for trade show exhibitors. The up to 10,000 characters capacity gives you more than enough power to broadcast your show specials, announcement, demo schedule, or even hiring. The motion features make your booth stand out from your neighbors, as far as 100 yards away.

These are 4 24" long pieces of 1530 extrusion, It is used and tapped on the ends for an M7 bolt. There are a few dings but it does not affect the extrusion

Document .nav{margin:0;padding:0; list-style:none;float:left;} .nav li{height:62px;line-height:60px;background:url('http://www.amonstar.com/photo/Template/00.png') right top no-repeat;float:left;font-size:18px;} .nav li a:link,.nav li a:visited,.

Enclosure Heater 30W Cirrus FCG0526.2R 1" x 1" x 3" long aluminum extrusion construction. Used but in very good condition. Taken from working equipment and presumed working.