[[Title]] [[Description]] Parts purchased are covered by 123 Laundry Solutions warranty only. Images and numbers used for identification purposes Only. If you do not find the equipment or part you need in our listings, please contact us and we will list it for you if we carry the item. Also, if you need more than the quantity listed, please let us know.
THIS AUCTION IS FOR A NEW OLD STOCK KITAGAWA 8" BB08 CNC LATHE SUPER LARGE BORE POWER CHUCK with A2-6 MOUNT. 2.600 THRU HOLE. 5.250 BOLT CIRCLE (6 bolts x M12) MASTER JAW SERRATION 1.5mm x 60° JAW T NUT SIZE (top .551 x bottom .855) DRAW TUBE SIZE 74MM X 2.0MM THREAD I bought several crates of surplus tooling from a machine shop.
Is your Delta Unisaw Jet-Lock fence not "locking" the rear clamp like it should? It could be due to a damaged lever in the rear clamp casting. This part is an exact replacement for the original equipment cam lever that is located inside the casting at the rear of the rip fence.
J little Mercer co. Sparkler 8-3 stainless steel three plates with two screens 1/4" top inlet 3/8" top center inlet 3/4" bottom center outlet 3/8" side outlet 1/4" side outlet vessel measures 8.5" dia x 5" deep overall 14" x 12" x 12" missing one top nut, otherwise looks useable although this item has no mfg plate, it
(1) INTERNAL PIPE CLAMP TOOL, STEEL, 1" OD COMPRESSION CLAMP, COLLET MACHINIST TOOL Used and in very good condition, some scratch marks; works great. Steel Internal Pipe Clamp Tool, 1" OD, Machinist Tool Collet. This sale is for one (1) internal pipe clamp tool.
(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (one): ALLEN-BRADLEY TYPE J LONG SHAFT, DUAL WITH TAP 1K OHM (1,000 - 1,000) DUAL WITH TAP 2 WATT POTENTIOMETER MARKED: JD1N200P102CA LINEAR TAPER, WITH 50% CENTER TAP DIM: 1 1/8" DIA X 1 1/4" BEHIND PANEL VOLTAGE: 500
(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (one): ALLEN-BRADLEY TYPE J LONG SHAFT 50K (50,000) OHM 2 WATT POTENTIOMETER LOG (AUDIO) TAPER DIM: 1 1/8" DIA X 9/16" BEHIND PANEL VOLTAGE: 500 RMS SHAFT: 1/4" W/SLOT X 1 1/2" LONG
THIS ITEM IS FOR 1 (ONE): ALLEN-BRADLEY TYPE J POTENTIOMETER AS FOLLOWS: 750 OHM 2 WATT LOCKING SCREWDRIVER ADJUST LINEAR TAPER MARKED: JA1L040S751UC/RV4LAYSA751A VOLTAGE: 500 vDC across terminals APPROX. DIM: 1 1/8" OD X 1/2" deep Refurbished with lockwasher, mounting nut, and locking nut. ALL POTS I SELL, NEW OR USED, ARE TESTE
Item is one 1000 ohm hum balance or trim potentiometer made by Allen Bradley. Device is labeled B458575-106 Type J. Portion of device markings may be a date code that may vary.
Item is one 10K ohm short shaft potentiometer made by Allen Bradley. Device is labeled RCA433916-88 Type J. Portion of device markings may be a date code that may vary.
Item is one 5000 ohm long shaft potentiometer made by Allen Bradley. Device is labeled B-458575-9 Type J. Portion of device markings may be a date code that may vary.
Item is one 100K ohm hum balance or trim potentiometer made by Allen Bradley. Device is labeled B-458575-114 Type J. Portion of device markings may be a date code that may vary.
Item is one 1500 ohm hum balance or trim potentiometer made by Allen Bradley. Device is labeled KS-5563-L5 Type J. Portion of device markings may be a date code that may vary.
These are new potentiometers 1) Allen Bradley type AB, 1.0 Meg Ohms, 1/4" dia x 1/4" shaft 1) Ohmite Type J, 2.0 Meg Ohms, 1/4" dia x 1/2" shaft Solder eye terminals on both 1 mounting nut included Shipping Information:
Item is one 250K ohm hum balance or trim potentiometer made by Allen Bradley. Device is labeled B-458575-121 Type J. Portion of device markings may be a date code that may vary.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.