j nut for sale, brand-new and used.

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (one) ALLEN-BRADLEY, 2 WATT, POTENTIOMETER A-B TYPE J POTENTIOMETER. SD ADJUST, LOCKING DUAL POT: 100K FRONT, 250K REAR (100K/250K) OHMS, 2 WATT, LINEAR TAPER SHAFT: 1/4" SLOTTED DIM: 1 1/8" OD X 1 1/4" behind panel Refurbished, tested and guaranteed, with mounting hardware & locking nut.

Product Description: Hytorc Torcgun JGUN A-5 Single Speed 1-1/2" Square Drive Pneumatic Torque Wrench w/ Standard Reaction Arm & Protective Padded Case. Made in the USA with the highest quality materials. Condition Notes: J-Gun is in excellent condition and has been well cared for.

THIS AUCTION IS FOR A NEW OLD STOCK KITAGAWA 8" B-8 CNC LATHE POWER CHUCK with A2-6 MOUNT. I bought several crates of surplus tooling from a machine shop. And this was in the bottom of one of the crates.

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (one): ALLEN-BRADLEY TYPE J AUDIO 10K (10,000) OHM 2 WATT POTENTIOMETER LOG (AUDIO) REVERSE TAPER (approx. 9K ohm @ 50% rotation from ccw terminal to wiper) DIM: 1 1/8" DIA X 9/16" BEHIND PANEL VOLTAGE: 500 RMS SHORT SHAFT:

This came off of a Bridgeport M-HeadIt is not the same as a J-head.Please visit our website, lostcreekmachine.com To see more tooling from Lost Creek Machine .Check out my other items! If we can combine more than one small item shipping may be less. Illinois residence and anyone

Malco MC12N 12-Inch Aluminum Combination Snip

the best I can do for this listing is describe the item to the best of my ability since I know nothing more about it other than it appears to be collectable. there are light scratches and scuffs all over the helmet like one would expect for a used hardhat. The head band inside the hardhat is worn as the pictures show but still complete and intact.The E.D., Bullard sticker inside is missing a small section but the rest is intact and in decent shape.There are 3 Shipfitter's and Helpers Local NO.

BRAND NEW IN HILTI RED CASE DX 36 POWDER ACUATED TOOL!! COMES WITH 500 1/4" STUDS FOR STEEL, 500 RED SHOTS, 500 1/4" NUTS w/ WASHER (ALL HILTI BRANDED) TAKES 10 STRIP CARTRIDGES AND SINGLE NAILS. HILTI DX-36 POWER ACTUATED TOOL - PART #384033 COMES WITH 2 YEAR FACTORY WARRANTY!

JW Winco 6T4WP7N NY-LEV Series WN9000.1 Stainless Steel Stud Type Leveling Mount with Lag Bolt Holes, Glass Filled Nylon Plastic Base with Non-Skid Pad, 3/8-16 Thread Size, 4" Stud Length, 800kg Maximum Load

You are bidding on Electronic Parts that we have left as excess from our manufacturing factory. The plastic bin totes are not included. We got all the parts into a box 30"x20"x20" at 75Lbs.

About us Shipping

About us Shipping

Collis Tool adapter Item # 68843 Specifications Extension Size 2 in. Adapter Size (A) 1 3/8 in. Morse Taper Hole (B) 2 Shank Length (C) 4 5/8 in.

THIS ITEM IS FOR: 1 (one): ALLEN-BRADLEY TYPE J SHORT SHAFT 500K (500,000) OHM 2 WATT POTENTIOMETER MARKED: JA1N032S504UA/RV4NAYSB504A LINEAR TAPER DIM: 1 1/8" DIA X 9/16" BEHIND PANEL VOLTAGE: 500 RMS SHORT SHAFT: 1/4" X 1/8" LONG MADE IN MEXICO

2 Pcs. Mitee-Bite Products LLC Made in USA Brand New Model No. #1 (Min.

LOT (14) Vintage Allen Bradley Look to be unused. 61720 U-0.1 MEG

(ALL POTS I SELL, NEW OR USED, ARE TESTED GOOD AND GUARANTEED) THIS ITEM IS FOR 1 (one): ALLEN-BRADLEY TYPE J LONG SHAFT, DUAL WITH TAP 500 OHM DUAL WITH TAP 2 WATT POTENTIOMETER MARKED: JD1N200P501CA LINEAR TAPER, WITH 50% CENTER TAP DIM: 1 1/8" DIA X 1 1/4" BEHIND PANEL VOLTAGE: 500 RMS

Product Description: Jetyd Torcgun JGUN J-5 Single Speed 1-1/2" Square Drive Pneumatic Torque Wrench w/ Standard Reaction Arm & Protective Padded Case. Made in the USA with the highest quality materials. Condition Notes: Very good.

Images and numbers used for identification purposes Only. If you do not find the equipment or part you need in our listings, please contact us and we will list it for you if we carry the item. Also, if you need more than the quantity listed, please let us know.