Craftsman No.1 Chain Pipe Vise This vise is in great shape.I used it all of my working career.When pipe is clamped in, it's not budging til you release it.Will clamp from 1/8th to 2 inch pipe.This one is the bottom screw style.
For your Consideration is this Machinist / Hobbyist Vise... Vise opens to 2-1/4" ... End of Vise to the end of adjusting screw is 8-7/8" when all the way open...
DESCRIPTION: NEW OLD STOCK, VARIOUS PARTS OF WHAT LOOKS LIKE A SMALL PRECISION VISE. I DO NOT KNOW WHO MADE THEM OR WHAT THE FINISHED PRODUCT WAS SUPPOSED TO BE. THERE ARE SOME PLATES WITH A V GROOVE IN THEM.
*****USPS Priority shipping to all 50 states.***** This auction is for 1 set of used 6" steel jaws like the ones shown in the pictures. Jaws should fit any Kurt Style vise. Jaw height overall 1.875" Jaw height 1.625" Length 6.00" Width 1.00" Hole spacing 3.875" Screw size (.532
Here is a Kurt double vise as shown, I don't know much about these....the tag says DL600 and the base casting number says DL400 as shown in the pictures. Also note missing center jaw...not sure if there is supposed to be a end cap on the screw at the handle?? Please look at picture, what you see is what you will
THIS IS A VINTAGE ERIE TOOL WORKS PIPEMASTER BENCH YOKE 3-JAW PIPE VISE 1/8"-2" No 0H. ITS GOT SOME RUST ON IT EVERYTHING WORKS. Measurements are 7.25" high not including the screw or handle, 5.5" wide at the base and 4.125" deep at the base.
the Sheldon style D drill press vise has been designed to meet the demand for a lightweight but strong vise for general purpose work. Stationary and movable jaws are box section semi-steel castings, affording the greatest possible strength with exceptionally light weight they are faced with steel plates, the plate on the movable jaw being furnished with V grooves for holding round stock either in a vertical or horizontal position.
Works with no problems - smooth operation. Surface rust and use wear. The anvil area (which is not an anvil area) is a bit beat up as is the top surface of the end of the bar.
F O R S A L E Kurt D810 Work-holding Vise The original Kurt Anglock D-Series vises are designed for precision part clamping on basic machine tools such asknee-type mills, grinders and machining centers. DSeries v
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
