keep fingers away for sale, brand-new and used.

12 pcs of N52 D3/4"dia x 1-1/2" Neodymium Cylinder Magnets , Ni coated, Axially magnetized. Pull force 46.6 lb. Important Safety Warning!

100 pcs of N52 Neodymium (Rare Earth) Block Magnets 1/2"x 1/4" x 1/16" thick, - Ni coated (Nickel-Copper-Nickel triple layer coated) - Magnetized Through Thickness. - Pull force 2.8 lb. - Industrial quality magnets - Stronger than Grade N50, N48, N45, N42, N40, N35 magnets.

24 pcs of N52, Neodymium (Rare Earth) Block Magnets 1-1/4"x 3/4" x 1/16" thick, - Ni coated (Nickel-Copper-Nickel triple layer coated) - Magnetized Through Thickness. - Pull force 8.6 lb. - Industrial quality magnets - Stronger than Grade N50, N48, N45, N42, N40, N35 magnets.

24 pcs of N52, 3/4"x 1/4" x 1/16" thick (19.05 x 6.35 x 1.59mm) Neodymium Block Magnets, - Ni coated (Nickel-Copper-Nickel triple layer coated) - Magnetized Through Thickness. - Pull force 3.4 lb. - Industrial quality magnets - Stronger than Grade N50, N48, N45, N42, N40, N35 magnets.

100pcs of N52 Neodymium (Rare Earth) Disc Magnets 1/8"dia x 1/32" thick, Ni coated, Axially magnetized Important Safety Warning! Disclaimer: ZigMag416 and Zigmyster Magnets do not assume any responsibility or liability for damages resulting from the use, misuse, or handling of magne

1 pc of Neodymium (NdFeB) Round Base Magnet Rubber Coated D3.46" x 0.34" thick with 1/4-20 threaded stud 1? long. Pull force 92lb.

2 pcs of D2.9" x 0.375" thick with 0.260" mounting hole. Round Base Magnet (RB-75), Chrome Plated, Pull force 75lb. Important Safety Warning!

100 pcs of OD3/8" x 9/64"id x 1/8"Neodymium Ring Magnets thick, Ni coated, Axially magnetized. Pull force 3.2 lb Important Safety Warning! Disclaimer: ZigMag416 and Zigmyster Magnets do not assume any responsibility or liability for damages resulting from the use, misuse, or handling of ma

100 pcs of N42, D7/8" x 1/8" thick with #8 screw countersink hole Neodymium (Rare Earth) Ring Magnets , Ni coated, Axially magnetized. Pull force 11 lb. South side facing up Important Safety Warning!

50pcs of N52, D3 x 2mm Neodymium (Rare Earth) Disc Magnets, Ni coated, Axially magnetized Important Safety Warning! Disclaimer: ZigMag416 and Zigmyster Magnets do not assume any responsibility or liability for damages resulting from the use, misuse, or handling of magnets. The buyer must agree t

50 pcs of OD1/2" x 3/16"id x 1/8"Neodymium Ring Magnets thick, Ni coated, Axially magnetized. Pull force 4.9 lb Important Safety Warning! Disclaimer: ZigMag416 and Zigmyster Magnets do not assume any responsibility or liability for damages resulting from the use, misuse, or handling of mag

1 pc of Neodymium (NdFeB) Round Base MagnetRubber Coated D2.6" x 0.315" thick with 1/4-20 threaded stud 1? long. Pull force 30lb.

12 pcs of N52, Neodymium (Rare Earth) Block Magnets 3/8"x 1/4" x 1/16" thick, - Ni coated (Nickel-Copper-Nickel triple layer coated) - Magnetized Through Thickness. - Pull force 2.3 lb. - Industrial quality magnets - Stronger than Grade N50, N48, N45, N42, N40, N35 magnets.

24 pcs of 1/2"x 5/16" x 3/16" Neodymium Block Magnets thick, Ni coated, Magnetized Through Thickness. Pull force 6.4 lb Important Safety Warning! Disclaimer: ZigMag416 and Zigmyster Magnets do not assume any responsibility or liability for damages resulting from the use, misuse, or h

Industrial 6" Square Magnetic Hopper Grate with 4 magnetic tubes (6SQ-05), spacing between magnetic tubes 0.500" - 304 Stainless Steel design, 1" diameter round tubes with pressed in aluminum end cups. Neodymium (rare earth) Magnets inside. NOT FOR FOOD INDUSTRY Custom size available.

50pcs of N52, Neodymium Disc Magnets 5/16"dia x 1/16", Ni coated, Axially magnetized. Pull force 2 lb Important Safety Warning! Disclaimer: ZigMag416 and Zigmyster Magnets do not assume any responsibility or liability for damages resulting from the use, misuse, or handling of magnets.

10pcs Strong Block 20x10x3mm N35 Cuboid Rare Earth Permanent Nd-Fe-B Magnets 100% brand new

This listing is for the digital .dxf file only. .dxf format CNC cutting file Plans and dxf cutting files for DYI parts tumbler Perfect for CNC plasma/laser/water jret cutting. Your dxf file will be emailed to you shortly after payment.