knockout 2 for sale, brand-new and used.

The Lotoons Store NEW Gardner Bender KO701C Knockout Seal 1/2-Inch 5/Carton

New old stock, Enerpac 1/2" Conduit sized replacement knockout punch. Appx. 7/8" Diameter hole.

Up for sale is a greenlee 2.125" (54MM) KNOCKOUT SET, part #5004245.9 and #50361732. Looks to barely have been used - if at all. Came from a business that downsized.

One SET/2 Per Listing: 1/2" pipe sized Greenlee knockout punches. Actual Hole Diameter 7/8". You are bidding on a set of (two punches and one draw stud).

Polyurethane rubber hole form/knockout for 2" or thinner concrete countertops. The hole is 1 1/2 inches in diameter and 1 inch tall. The flange hole tapers - it starts at 2 7/8 and tapers out to 3 1/8 top be exact, and is 1 inch tall.

Rubber hole form/knockout for concrete countertops. This rubber cylinder is 4" tall and 1 5/16" in diameter. It has a 1/4" hole all the way through.

For sale is a brand new cast urethane rubber drainboard mold/knockout for concrete countertop production. The measurements are: 14 inches wide 18 inches long The corner radius is approx. 3" The grooves are 1/2 inch wide and just under 1/4 inch deep The slope tapers from 3/8 inch deep at the far end to 3/4 deep to the end that matches the sink well Urethane rubber is good for over 100 castings Store flat and out of the sun and weather I'll make more as they sell.

Polyurethane rubber form/knockout for a standard sized vanity sink drain when casting a concrete sink. The piece overall is 2" tall. The main hole that it casts is 1 1/2" in diameter.

Brand new manufactured silicone rubber drain mold/knockout that will allow you to use junior size basket drains in your concrete sinks. Silicone rubber and a large center hole allows the knockout to stretch out of the two-stage hole that it casts for multiple uses. No cutting out.

Concrete/Cement roller Mountain Mods PS3 Skins

Gardner Bender Mechanical Knockout Punch Set 1/2 ” – 1 1/4 ” in Case PR130K Here

Greenlee No 735BB Ball Bearing Knockout Punch Set 1/2 ” – 1 1/4 ” in Case PR129K

VINTAGE GREENLEE KNOCKOUT PUNCH SET #737 WITH ORIGINAL LEATHER CASE USED WORKABLE CONDITION SHIPPING TO U.S.A. ONLY

.copyright { color : #000000; font-size : 8pt; font-family : arial, helvetica, sans-serif; } .link { font-family: verdana, sans-serif; font-size:12px; underline; color:#00BF00; } HR { color: #000000; } .item_image{ } .description { font-family: Arial, sans-serif; color: #006600; font-weight: normal; font-size: 10pt; } .patternframe { border: 1px solid #cccccc; padding: 20px 20px 20px 20px; } .stencilframe { } .stencil_bottom { background:url(http://imagehost.vendio.com/my/templates/

This is a Greenlee 1/2" Conduit Knockout Punch (500-4006) + Die (501-4722) + Draw Bolt Stud (500-4045) in excellent condition. Made in USA. This set punches a 7/8" clearance hole for 1/2" conduit and is designed to operate on the 3/8" Greenlee draw bolt stud included.

For sale are six greenlee knockout punches plus another knockout punch marked enerpac kd500 1/2. I believe these are conduit punches for the most part. Sizes are 3/4" 1" 1 1/4" 1/2" , one is marked 1/2 conduit 7/8 diameter, and the last one is also marked 7/8 diameter 1/2 conduit and appears newer than the rest.

DETAILED DESCRIPTION: For sale is this Greenlee set of conduit knockout punches. The leather pouch contains the 1-2", 3/4", 1", 1-1/4". Overall good condition.