Laser Modules

The average price for current category was $400.47 last month.

There are 3721 ads in this category.

High Power CO2 Industrial Burning Laser ZnSe Lens & Aluminum Holder Mounting Jig

High power co2 industrial burning laser znse lens & aluminum holder mounting jig

  • La Valle, Wisconsin, United States
  • Jan 30th
This is a 1.1 inch diameter, 7 inch FL lens with a nice mounting jig. It is good for cutting thicker materials. The lens is in serviceable condition with minor imperfections due to use.
405nm 150mW UV Ultraviolet laser diode in Aixiz module w/ leads US Seller SALE!

405nm 150mw uv ultraviolet laser diode in aixiz module w/ leads us seller sale!

  • Midlothian, Virginia, United States
  • Jan 30th
The diode that is used in this laser module is brand new, and was not extracted from a Blu-ray burner sled, as is visible by its long, uncut pins. They are rated by the manufacturer for 170mW pulse, however they can be driven to provide approximately 150mW continuously (an additional heatsink may be required for prolonged operation of over 35 seconds at this power level).
Synrad CO2 Laser Engraver Marker Cutter Engine 2x CT 6210 Galvos

Synrad co2 laser engraver marker cutter engine 2x ct 6210 galvos

  • La Valle, Wisconsin, United States
  • Jan 30th
This is a synrad laser engraver scan head. It has 2x CT-6210L galvos with gold mirrors, several ZnSe optics, A red aiming laser, the galvo driver amplifiers, and a simple computer board. It needs + 15 and - 15V and +30V to work.
Panasonic AOM Yag Laser Beam Modulator Q-switch RF Driver TTL 200MHz 5x

Panasonic aom yag laser beam modulator q-switch rf driver ttl 200mhz 5x

  • La Valle, Wisconsin, United States
  • Jan 30th
LOT OF 5 UNITS! These are easy to use RF driver modules for AOM and q-switches that run at up to 2W of RF at 200MHz. It requires 24V and 5V to turn on.
Synrad UC 1000 Carbon Dioxide Cutting Laser CO2 Burning Control Box J48 50W

Synrad uc 1000 carbon dioxide cutting laser co2 burning control box j48 50w

  • La Valle, Wisconsin, United States
  • Jan 30th
This is a synrad laser controller box that can be used with most synrad lasers up to 50W of power. It has a lot of functions and features that most laser control boxes don't have. It had the main power control pot replaced by a much higher quality potentiometer, and i am including a small 24VDC transformer with it so you can put it to work almost immediately.
High Power 12W Synrad RF Excited Carbon Dioxide Laser CO2 Cutting Engraver Tube

High power 12w synrad rf excited carbon dioxide laser co2 cutting engraver tube

  • La Valle, Wisconsin, United States
  • Jan 30th
This is a complete Synrad CO2 laser that outputs about 12.6W as measured on a power wizzard laser checker. The laser needs a 24 to 30V at 9A or better power supply, and a 5V nominal (optical isolator- 2.5 to 6V is fine) signal to run. I have a very nice control box for this laser as well in another listing.
Coherent Butterfly Laser Diode High Power TEC Cooler Module Testing Assembly

Coherent butterfly laser diode high power tec cooler module testing assembly

  • La Valle, Wisconsin, United States
  • Jan 30th
This is a butterfly laser diode housing with a tested good TEC. The unit would be good for making a custom laser testing jig or cooler for a special project. It is pretty hard to find.
Cambridge Technology MicroMax 673 XY Laser Light Show Galvo Driver Servo Amp

Cambridge technology micromax 673 xy laser light show galvo driver servo amp

  • La Valle, Wisconsin, United States
  • Jan 30th
This is a model 673 galvanometer amplifier, analog type for laser light show. It is new old stock from a *VERY* expensive medical surgery laser. See my other listings for the 6210H galvos that go with this.
Small Dichroic Beam Combining Mirrors Reflect Red Blue Pass Green Lot of 3

Small dichroic beam combining mirrors reflect red blue pass green lot of 3

  • La Valle, Wisconsin, United States
  • Jan 30th
These are small dichroic mirrors that reflect red and blue light, but pass green light. They could be used for combining the beams of a laser light show machine or used for general experimental use. The mirrors can take a lot of laser power and are polarization sensitive allowing you to get creative with them.
TRIANGULAR PRISM 2" Optical Glass Triple Triangular Prism Physics Teaching Light

Triangular prism 2" optical glass triple triangular prism physics teaching light

  • Middle Village, New York, United States
  • Jan 30th
THIS IS A USED 2" TRIANGLE PRISM MANY USES. FLAT PRIORITY SHIPPING $ 4.95 INCLUDES SHIPPING HANDLING TRACKING PACKING INSURANCE ETC. EXTRA FOR INTERNATIONAL SHIPPING.
Lot of 2 - LaserTel Laser Diode Array - p/n LT-CSP-01-1639 - EA16

Lot of 2 - lasertel laser diode array - p/n lt-csp-01-1639 - ea16

  • Bloomfield, Connecticut, United States
  • Jan 30th
Lot of 2 - LaserTel Laser Diode Array - p/n LT-CSP-01-1639 - EA16 We are starting the price very low, auction style.... Please email if you have any questions or would like to speak with someone in person. These items can be inspected at our facility in Bloomfield, CT.
Rofin Sinar 825-3019-1 REV G Power Monitor Module

Rofin sinar 825-3019-1 rev g power monitor module

  • Hot Springs National Park, Arkansas, United States
  • Jan 30th
This is a brand new unit, that has never been installed. You will see from the photographs that the box is a little damaged, but the contents are undamaged and ready to be installed. Shipping is included in the price via USPS or UPS ground, however we can ship faster rates.
2W 808nm Laser

2w 808nm laser

  • Twin Falls, Idaho, United States
  • Jan 30th
808 nm Inferred 2W Laser. Laser has maybe 1 hour on it. Works great.
Synrad 10 watt CO2 Laser Station Dual Rotary 3 Jaw Chucks X axis Camera & PC

Synrad 10 watt co2 laser station dual rotary 3 jaw chucks x axis camera & pc

  • Minneapolis, Minnesota, United States
  • Jan 30th
SYNRAD 10 WATT CO2 LASER STATION DUAL ROTARY 3 JAW CHUCKS & X AXIS CAMERA ALIGNMENT with Dual Parker controls includes Cross Hair Generator PC, Monitor, Keyboard and Mouse This unit was used but appears to be in full operating condition. I powered it up and was able to rotate and Jog, the laser powered up This unit was used in R&D
800 mw 808nm Laser - Inferred Laser

800 mw 808nm laser - inferred laser

  • Twin Falls, Idaho, United States
  • Jan 30th
800 mw 808 nm Inferred Laser. Includes Driver has about 1 hour total use time.
DWYER SERIES 3000 3210 C  PHOTOHELIC PRESSURE SWITCH/GAGE (GAUGE)

Dwyer series 3000 3210 c photohelic pressure switch/gage (gauge)

  • Santa Fe, New Mexico, United States
  • Jan 30th
Dwyer Photohelic pressure switch/gage. Series 3000, model 3210C. 0-10 psi range, 35psig max pressure.
9MM laser head laser tube laser diode 3V 30ma 5mw red dot

9mm laser head laser tube laser diode 3v 30ma 5mw red dot

  • Saginaw, Michigan, United States
  • Jan 30th
9MM laser head laser tube laser diode 3V 30ma 5mw red dot Model: LD-K650A13Operating voltage: DC 2.8 ~ 5VOperating Current: <30 mADrive mode: APCOutput power: <5 mWWorking temperature: -10 to 50 degrees CelsiusStorage temperature: -40 to 70 degrees CelsiusWork: continuous output APC circuitWorking life:> 5000 hoursDimensions: Diameter 9 mm length of 22.5 mmShell Material: Copper

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies