lathe chip guard for sale, brand-new and used.

Up for sale is this home made lexan chip guard for a South Bend 10K lathe. This came with a lathe I bought and seems ready to use. This threads into the headstock where the back gear tension bolt goes.

Up for sale is this South Bend 9" & 10K headstock chip guard. This is in nice shape with no dents. This guard is something missing.

This is a Homier Speedway 7x12 (03911) Mini Metal Cutting Lathe. This is the exact same lathe as the Grizzly G8688, Tormach Duality 30689, Harbor Freight 93799, etc. as they are all made by Sieg It is in like new condition with very little use.

There is a chip guard, I do not know the brand of lathe maybe a Logan 3 7/8" x 3 3/4" If you recognize please let me know i'll adjust the listing after I verify

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

Please read the entire listing and terms before bidding. If you have any questions please ask them before bidding. Bidding on this item is to be considered as acceptance of all the terms listed below.

Brand new 12" manual lathe chuck chip guard. Never used or installed. At on time, over 9 years ago we had many manual turret lathes such as Monarch, Warner Swasey and others and suspect this was purchased for one of these machines but was never installed.

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

CLAUSING COLCHESTER MODEL 17 ENGINE LATHE GENERAL SPECIFICATIONS: SWING OVER BED 17"SWING OVER CROSS SLIDE 10.5"DISTANCE BETWEEN CENTERS 60"SPINDLE BORE 3"

HARDINGE Super-Precision Toolroom Lathe HLV-H 3032 220v 3 Phase 1968 Model Works well with little vibration - no collets Phase II Tool Post with turning tool holder, boring bar holder, turning tool holder with boring bar groove, parting tool holder, and knurling tool Manual 5c collet draw tube 5c collet closer is not Hardinge 5c spindle hose splash guard Tail stock dead center Coolant Pump Chip Guard Local Pick Up - Wytheville VA

Champion Machinery, Inc. Quote

For immediate response to questions please contact a sales rep at 800-745-6008, otherwise your questions will be answered as soon as possible. Our stock number: 27101

For immediate response to questions please contact a sales rep at 800-745-6008, otherwise your questions will be answered as soon as possible. Our stock number: 25846

Logan Lathe Cross Slide Chip Guard Cover This covers the cross-slide screw to prevent chips from falling into the screw assembly As Pictured I have many parts for this lathe including the apron, carriage, lead screw, motor, reverse switch, various covers, cross-slide, compound and bed. Let me know what you're looking for. Browse other parts for sale at http://www.owwm.net/?page_id=417 Thanks for looking

Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2009. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-383-7.

For Sale is a Kent 1340 Gap lathe which when the gap is removed will swing over 18". I bought this machine new and have only put about 20 hours on it. The paint is like new, it is powered by 220 SINGLE PHASE which can be run off of house current without using a phase converter.

I barely used this lathe