+ Post new Ad

Live Centers

The average price for current category was $53.03 last month.

There are 2750 ads in this category.

Craftsman Lathe Chuck - MT2 60 Degree Bearing Center 29843

Craftsman lathe chuck - mt2 60 degree bearing center 29843

  • Morgan Hill, California, United States
  • Jun 12th
COMES EXACTLY AS SHOWN PLEASE READ CONDITION DESCRIPTION PRIOR TO PURCHASE IF IT IS NOT SHOWN THEN IT IS NOT INCLUDED
Craftsman Lathe Chuck - MT2 Work Arbor 29850

Craftsman lathe chuck - mt2 work arbor 29850

  • Morgan Hill, California, United States
  • Jun 12th
COMES EXACTLY AS SHOWN PLEASE READ CONDITION DESCRIPTION PRIOR TO PURCHASE IF IT IS NOT SHOWN THEN IT IS NOT INCLUDED
Craftsman Lathe Chuck - MT2 Screw Center 29846

Craftsman lathe chuck - mt2 screw center 29846

  • Morgan Hill, California, United States
  • Jun 12th
COMES EXACTLY AS SHOWN PLEASE READ CONDITION DESCRIPTION PRIOR TO PURCHASE IF IT IS NOT SHOWN THEN IT IS NOT INCLUDED
Craftsman Lathe Chuck - MT2 Work Arbor w/ Chuck 1/2" Jacobs Chuck 29849

Craftsman lathe chuck - mt2 work arbor w/ chuck 1/2" jacobs chuck 29849

  • Morgan Hill, California, United States
  • Jun 12th
COMES EXACTLY AS SHOWN PLEASE READ CONDITION DESCRIPTION PRIOR TO PURCHASE IF IT IS NOT SHOWN THEN IT IS NOT INCLUDED
MT4 BULLNOSE LIVE CENTER - NEW

Mt4 bullnose live center - new

  • Madison Heights, Michigan, United States
  • Jun 12th
THE BULLNOSE CENTER HAS ALL THE FEATURE OF LIVE CENTER BUT THE HEAD IS MUCH MORE RUGGEDLY CONSTRUCTED FOR CUTTING PIPE AND HOLLOW SHAFT WITH EFFICIENCY AND HIGHEST PRECISION. MORSE TAPER: 4MT BULL NOSE BOTTOM DIAMETER: 5.04" BULL NOSE TIP DIAMETER: 1-3/8" RADIAL LOADS: 700LBS THRUST LOADS: 770LBS ALLOVER LENGTH: 7.62" BULL NOSE TAPER: 75 degree
MT2 BULLNOSE LIVE CENTER - NEW

Mt2 bullnose live center - new

  • Madison Heights, Michigan, United States
  • Jun 12th
THE BULLNOSE CENTER HAS ALL THE FEATURE OF LIVE CENTER BUT THE HEAD IS MUCH MORE RUGGEDLY CONSTRUCTED FOR CUTTING PIPE AND HOLLOW SHAFT WITH EFFICIENCY AND HIGHEST PRECISION. MORSE TAPER: 2MT BULL NOSE BOTTOM DIAMETER: 2.48" BULL NOSE TIP DIAMETER: 0.5'' RADIAL LOADS: 440LBS THRUST LOADS: 410LBS ALLOVER LENGTH: 5.37" BULL NOSE TAPER: 70 degree
7pc Multi-Shape Lathe Live Center Set Morse Taper #2

7pc multi-shape lathe live center set morse taper #2

  • Columbus, Ohio, United States
  • Jun 12th
7pc Multi-Shape Lathe Live Center Set Morse Taper #2 * Made of high grade tool steel hardened and ground. * Precision needle bearings used for high accuracy eith long life. * Accuracy guaranteed to 0.0012 ~ 0.0039" at the center head.
NEW 4MT 0.000197" PRECISION LATHE LIVE CENTER MORSE TAPER #4 FOR CNC LATHE

New 4mt 0.000197" precision lathe live center morse taper #4 for cnc lathe

  • Diamond Bar, California, United States
  • Jun 12th
This live center has a shank size of Morse taper #4 and can handle a maximum RPM of 2,500. It boasts an accuracy of 0.000197" and can support a load capacity of up to 1,200 lb. The center point is set at a 60-degree angle and has an overall length of 7.68".
NICE Heavy Duty MT5 Live Center for Lathe

Nice heavy duty mt5 live center for lathe

  • Waterford, Michigan, United States
  • Jun 12th
<img src="http://ti2.auctiva.com/web/aswCr
HELEX CENTER CUTTING END MILL 5/16&#034; 4 FLUTE EDP 56773*

Helex center cutting end mill 5/16" 4 flute edp 56773*

  • Sun Valley, California, United States
  • Jun 12th
MT1 MEDIUM DUTY LIVE CENTER (3900-5001)

Mt1 medium duty live center (3900-5001)

  • Chino, California, United States
  • Jun 12th
MT5 7 PIECE INTERCHANGEABLE BULL NOSE LIVE CENTER SET (3900-5055)

Mt5 7 piece interchangeable bull nose live center set (3900-5055)

  • Chino, California, United States
  • Jun 12th
MT2 MEDIUM DUTY LIVE CENTER (3900-5002)

Mt2 medium duty live center (3900-5002)

  • Chino, California, United States
  • Jun 12th
MT4 MEDIUM DUTY LIVE CENTER (3900-5004)

Mt4 medium duty live center (3900-5004)

  • Chino, California, United States
  • Jun 12th
MT3 MEDIUM DUTY LIVE CENTER (3900-5003)

Mt3 medium duty live center (3900-5003)

  • Chino, California, United States
  • Jun 12th
MT1 CARBIDE TIPPED HALF-NOTCHED DEAD CENTER (3900-6056)

Mt1 carbide tipped half-notched dead center (3900-6056)

  • Chino, California, United States
  • Jun 12th
MT4 LONG NOSE LIVE CENTER MORSE TAPER#4 TRIPLE BALL BEARING DESIGN FOR LATHE

Mt4 long nose live center morse taper#4 triple ball bearing design for lathe

  • Diamond Bar, California, United States
  • Jun 12th
Product Description: Designed for medium speed medium load lathe. Triple ball bearing design. Extended spindle to achieve high efficiency.
MAZAK POWER CENTER V-7.5 CIRCUIT DIAGRAMS AND MAINTENANCE MANUAL 2 BOOKS mona

Mazak power center v-7.5 circuit diagrams and maintenance manual 2 books mona

  • Sun Valley, California, United States
  • Jun 12th
MAZAK POWER CENTER MANUAL TYPE : V-7.5
MAKINO 6M-MODEL B PROGRAMMING,VERTICAL CENTER FNC125L-A INSTRUCTION MANUAL mona

Makino 6m-model b programming,vertical center fnc125l-a instruction manual mona

  • Sun Valley, California, United States
  • Jun 12th
MAKINO PROGRAMMING AND VERTICAL CENTER INSTRUCTION MANUAL
MAZAK POWER CENTER V-10N OPERATING MANUAL FANUC SYSTEM 6M-B mona

Mazak power center v-10n operating manual fanuc system 6m-b mona

  • Sun Valley, California, United States
  • Jun 12th
MAZAK POWER CENTER OPERATOR'S MANUAL TYPE: V-10N

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies