Live Centers (Workholding Tools) for sale, page 21

Schwenksville, Pennsylvania, United States
Jun 10th

Royal Spindel Type Live Center #5MT Please look at pictures to verify condition. You are getting everything shown in the pictures. If it is not in the pictures it is not included.

Royal live center #5mt

Schwenksville, Pennsylvania, United States
Jun 10th

Royal Spindel Type Live Center #5MT Please look at pictures to verify condition. You are getting everything shown in the pictures. If it is not in the pictures it is not included.

Okuma lb15 cnc lathe turret tool changer fixture plate turning center 12 sites

San Marcos, California, United States
Jun 10th

Turret Tool Plate & Shaft from OKUMA LB15 CNC Lathe/Turning Center Condition: Good, Some minor dents & marks but fully functional Has 12 tooling locations for tool mounts on rotating platter. Tooling mounts on an approximate 16" Diameter Comes only with what is seen in photos, no other accessories

Ready tool g-20 live center (inv.31174)

Portland, Connecticut, United States
Jun 10th

Ready Tool G-20 Live Center Number L-20 No. 2 Morse Taper Spindle Shank with a No. 4 Morse Taper adapter used (Inv.31175)

#3 mts quad bearing live center (b-4-4-7-1)

Mitchell, Indiana, United States
Jun 10th

(B-4-4-7-1) THIS IS A #3MTS QUAD BEARING LIVE CENTER. MADE BY: ROYAL PRODUCTS UNLESS OTHERWISE STATED, WE WARRANT OUR ITEMS FOR 14 DAYS AFTER SHIPPING. INSPECT THE ITEM AND IF YOU FIND IT UNSATISFACTORY, CONTACT US VIA EBAY MESSAGING OR CALL OUR TOLL FREE NUMBER ABOVE REGARDING RETURNING THE ITEM FOR A REFUND OR POSSIBLE EXCHANGE.

Nice riten 17106 concentric heavy duty live center w 6mt

Glendora, California, United States
Jun 10th

NICE RITEN 17106 CONCENTRIC HEAVY DUTY LIVE CENTER W 6MT Shank : 6MTModel No 17106 ** Comes as Shown ** **Discounted shipping available when MORE THAN one item is purchased but must send invoice request** ** If item is

Precision heavy duty live center set morse taper 3mt unbranded

Morton, Illinois, United States
Jun 10th

GOOD CONDITION!!!! PRECISION HEAVY DUTY LIVE CENTER SET MORSE TAPER 3MT

Conzella grand 323 mt2 lathe live center made in germany

Morton, Illinois, United States
Jun 10th

CONZELLA GRAND 323 MT2 Lathe Live Center MADE IN GERMANY

Mt3 bullnose live center #803-bn3-in - new

Madison Heights, Michigan, United States
Jun 10th

THE BULLNOSE CENTER HAS ALL THE FEATURE OF LIVE CENTER BUT THE HEAD IS MUCH MORE RUGGEDLY CONSTRUCTED FOR CUTTING PIPE AND HOLLOW SHAFT WITH EFFICIENCY AND HIGHEST PRECISION. MORSE TAPER: 3MT BULL NOSE BOTTOM DIAMETER: 3.07" BULL NOSE TIP DIAMETER: 1-5/8" RADIAL LOADS: 700LBS THRUST LOADS: 770LBS ALLOVER LENGTH: 6.77" BULL NOSE TAPER: 70 degree

2mt medium duty small head live center (3900-5029)

Chino, California, United States
Jun 10th

Pair of riten mt3 live centers (bull and standard) nice condition

Pierceton, Indiana, United States
Jun 10th

Here is a very nice set of Riten MT3 live centers ( standard tip and changeable bull nose). No signs if abuse, nice smooth operation, nice clean tapers. Ships to USA ONLY.

Riten - 4mt taper shank

Columbus, Ohio, United States
Jun 10th

Riten - 4MT Taper Shank, 4 Inch Head Diameter 8,000 Lbs. Capacity Live Center 4-9/32 Inch Long Case, 1 Inch Point Diameter, 0.00015 Inch Accuracy, 4,800 Lbs. Maximum Workpiece, Bull Nose Point

Ready tool live center r-2n (inv.34984)

Portland, Connecticut, United States
Jun 10th

Ready Tool Live Center R-2N spins good 2MT with a 2MT to 3MT adapter light engravings and a spot of some surface rust (Inv.34984)

Mt5 bullnose live center bottom dia. 5.83" morse taper 5 #803-bn5 - new

Madison Heights, Michigan, United States
Jun 10th

THE BULLNOSE CENTER HAS ALL THE FEATURE OF LIVE CENTER BUT THE HEAD IS MUCH MORE RUGGEDLY CONSTRUCTED FOR CUTTING PIPE AND HOLLOW SHAFT WITH EFFICIENCY AND HIGHEST PRECISION. MORSE TAPER: 5MT BULL NOSE BOTTOM DIAMETER: 5.83" BULL NOSE TIP DIAMETER: 1-7/8" RADIAL LOADS: 700LBS THRUST LOADS: 770LBS ALLOVER LENGTH: 8-3/4" BULL NOSE TAPER: 75 degree

Mt5 bullnose live center morse taper 5 bottom dia. 6.61" #803-bn5 - new

Madison Heights, Michigan, United States
Jun 10th

THE BULLNOSE CENTER HAS ALL THE FEATURE OF LIVE CENTER BUT THE HEAD IS MUCH MORE RUGGEDLY CONSTRUCTED FOR CUTTING PIPE AND HOLLOW SHAFT WITH EFFICIENCY AND HIGHEST PRECISION. MORSE TAPER: 5MT BULL NOSE BOTTOM DIAMETER: 6.61" BULL NOSE TIP DIAMETER: 1-15/16" RADIAL LOADS: 700LBS THRUST LOADS: 770LBS ALLOVER LENGTH: 8-3/4" BULL NOSE TAPER: 75 degree

(36) lathe dead center assortment sizes brands variety shank configuration 50lbs

Cornell, Illinois, United States
Jun 10th

Please call Brett At 309-261-5695 for questions or issues with purchase before filing ebay return claim. 70 shelf (36) Lathe Dead Center Assortment Sizes Brands Variety Shank Configurations. 50lbs VIEW ALL 11 PHOTOS View all photos carefully.

(17) lathe dead center assortment sizes brands variety shank configuration 36lbs

Cornell, Illinois, United States
Jun 10th

Please call Brett At 309-261-5695 for questions or issues with purchase before filing ebay return claim. 70 shelf in box lot#2 (17) Lathe Dead Center Assortment Sizes Brands Variety Shank Configuration 36LBS View all photos carefully. Inventory #2513