LOTOS LTPDC2000D 110/220VAC Pilot Arc Plasma Cutter with 200A tig/stick Welder, US $350 – Picture 0

LOTOS LTPDC2000D 110/220VAC Pilot Arc Plasma Cutter with 200A tig/stick Welder, US $350 – Picture 1

LOTOS LTPDC2000D 110/220VAC Pilot Arc Plasma Cutter with 200A tig/stick Welder, US $350 – Picture 2

LOTOS LTPDC2000D 110/220VAC Pilot Arc Plasma Cutter with 200A tig/stick Welder, US $350 – Picture 3

LOTOS LTPDC2000D 110/220VAC Pilot Arc Plasma Cutter with 200A tig/stick Welder, US $350 – Picture 4

LOTOS LTPDC2000D 110/220VAC Pilot Arc Plasma Cutter with 200A tig/stick Welder, US $350 – Picture 5

LOTOS LTPDC2000D 110/220VAC Pilot Arc Plasma Cutter with 200A tig/stick Welder, US $350 – Picture 6

LOTOS LTPDC2000D 110/220VAC Pilot Arc Plasma Cutter with 200A tig/stick Welder, US $350 – Picture 7

LOTOS LTPDC2000D 110/220VAC Pilot Arc Plasma Cutter with 200A tig/stick Welder, US $350 – Picture 8

LOTOS LTPDC2000D 110/220VAC Pilot Arc Plasma Cutter with 200A tig/stick Welder, US $350 – Picture 9

LOTOS LTPDC2000D 110/220VAC Pilot Arc Plasma Cutter with 200A tig/stick Welder, US $350 – Picture 10

Lotos Ltpdc2000d 110/220vac Pilot Arc Plasma Cutter With 200a Tig/stick Welder

US $350

Sunnyvale, California, United States
Jan 30th

Open on mobile:
QR code

GENERAL OVERVIEW Make: LOTOS TECHNOLOGY Model: LTPDC2000D (5th Generation with improved HF board) Type: 3-in-1 IGBT Pilot Arc 50A Plasma Cutter 200A TIG Welder, 200A STICK Welder Condition: BRAND NEW (In Sealed Factory Box) Status: IN STOCK (Ships in 2 Business Days) Features: • 50A plasma cutter.• Dual Voltage (110/220), DUAL Frequency ( 50Hz/60Hz )• Robust Infineon (By Siemens) IGBT Power Drive Matrix with PILOT ARC Plasma Cutter• Brand new yet double function tested and performance tuned prior to shipping• PAPST cooling system from Germany• Input Voltage: 200~250 VAC• Input Power Frequency: 50 hz / 60 hz (Better performance under 60 hz)• Insulation Grade: B • Housing Protection Grade: IP21 • Size: 15.5'' L x 8'' W x 12'' H • weight: 43 IB, with ped: 52 • Certification: CE, CCC, CSA and ISO-9001 certification • Power factor: 0.93 • Power efficiency: 85% Accessories: • Larger 60A Heavy Duty Plasma cutting torch. with Pilot Arc function and simple guide (not shown on the picture), (you can disconnect one cable to disable pilot arc function for this torch, all CNC users must use Pilot Arc function). (12' 2")• 3 pieces are pre-installed on cutting torch.• Tig Welding Torch WP-17 (with long and short caps) (12' 1")• Air Filter/Regulator with accessories and brackets• Air Hose (9' 3")• Argon Regulator (U.S Standard Argon Regulator with CGA580 Connector• Stick (ARC) Holder (10')• Ground Clamp & Cable • 220VAC Power Plug • User Manual (Click Here) • Quick Setup Guide (Click Here) ABOUT LOTOS Since 2000 Lotos Technology introduced Inverter Technology in welding and cutting machines, Lotos' latest high frequency inverter technology utilizes IGBT to deliver a far more constant, concentrated and precise current to the cutting surface. This technology has been substantially reduced in size and weight of Inverter Plasma Cutters. It helps you to easily achieve smooth, clean cuts of wide range of surfaces and material (e.g. stainless steel, alloy steel, brass, aluminum and other conductive material) with minimal heat input and without distortion of metal. Lotos Plasma cutters are designed especially for businesses and DIY (do-it-yourself) users, while fully accommodating the demands of professional operators. SPECS Plasma Cutting• 220~240VAC, 50/60HZ• Duty Cycle: 60% at 50 amps and 100% at 35 amps• Rated Input Current: 27 amps• 3" Per minute @ 1" Steel (Severance Cut)• 7" Per minute @ 3/4" Thick Steel• 17" Per minute @ 1/2" Thick Steel• Air Pressure Required: 60~70 psi @ 3.6 CFM TIG welding• Output Current: 15-200 Amps• Power Usage 17 Amps @ 220VAC • No Load Voltage: 62V • Can Weld: Steel, Stainless, Moly, Ferrous • Duty Cycle: 60% @ 200 Amps 100% @ 105 Amps • High Frequency Start / HF Welding • Working Voltage: 16.9V • Gas Flow: 2-5L/min (using Argon supply) • Footpedal fully adaptive. (Footpedal NOT included in the package) Arc/Stick/MMA Welding: • Output Current: 15-200 Amps • Power Usage 23 Amps @ 220VAC • No Load Voltage: 62V • Can Weld: Steel, Stainless, Moly, Ferrous • Duty Cycle: 60% @ 200 Amps 100% @ 95 Amps • High Frequency Start / HF Welding • Working Voltage: 25 Volts • New Feature Added: Aluminum Welding for Stick Welding ONLY (patent pending) CONTROL PANEL Accessories (Click to view FULL size image) Unrivaled Quality The production process for Lotos products is among the most stringent in the world and meets or exceeds some of the industry's most rigid standards. Our studies show that it is in fact among one of the best in the industry and is unrivaled by other would-be competitors. The quality of each of the integrated components is constantly monitored during the course of production. Only components and materials that meet the highest industry standards for quality are permitted to be incorporated into LOTOS products. Finally, upon conclusion of production, each unit is put through a newly devised, far more rigorous 30 point testing and quality inspection routine. This process is critical to ensuring a product that is not only safe, but reliable in both performance and durability. Cut at 12 Times the Speed of Sound Plasma Cutting is a process that is used to cut steel and other metals using a plasma torch. In this process, an inert gas (compressed air) is blown at high speed out of a nozzle; at the same time an electrical arc is formed through that gas from the nozzle to the surface that is being cut, turning some of that gas to plasma. The plasma is sufficiently hot to melt the metal being cut and moves sufficiently fast to blow molten metal away from the cut. The plasma, which is maintained between the work-piece and electrode, travels at over 9000 MILES PER HOUR (15,000 km/Handle). That's over twelve times the speed of sound. Advantage of Plasma vs. Oxy-Fuel Torch Plasma does not use expensive, hazardous gases, only compressed air. It imparts much less heat into the piece being cut, eliminating warping. It does not require ignition. It leaves little to no slag to clean up or grind off. The cost per cutting hour can be less than oxy-fuel since there is no gas cost. It is also much quicker and easier. So, you cut better, faster and inexpensively. Skill and Training There is not a lot of skill or training required to operate a plasma cutter. The torch should remain at a 90-degree angle. ADVANCED INVERTER TECHNOLOGY The LTPDC2000D inverter rectifies the input voltage (220VAC) into DC (Direct Current), which is then fed into a series of IGBTs. LOTOS LTPDC2000D utilizes the most advanced Infineon (By Siemens) Technology. These IGBT components are switched at thousands of Hertz, which greatly reduces the magnetic flux, and therefore the size of the transformer. Hence, the use of IGBTs allows for a compact and light weight machine such as the LTPDC2000D to operate at its performance parameters. In simple terms the use of these IGBTs makes it possible for LTPDC2000D to produce the necessary power, using very little space and creating minimal heat dissipation. Payment We accept Paypal, Credit cards (Visa/Master/Discover/American Express), Money Order or Checks. Please call us by 408-739-2329 if you have any questions. International customers, please contact us for shipping fees. Shipping and Tracking FREE FedEx shipping with FREE tracking information to 48 states.Additional Shipping Info: Priority mail (2 to 3 days) is $39 FREE tracking information Canada FedEx Ground: $39 Canada Priority Mail Shipping: $79 International Priority mail (to European countries and Mexico, Brazil): $120 International Priority mail (to Australia): $160 We try our best to ship the item within 2 business days after payment is received (most of time within 1 business day) FedEx does not ship to a PO Box address, you have to use priority mail to ship large packaging to a PO box address WARRANTY, SERVICE and PARTS Warranty Terms: Lotos Technology warrants that all equipment sold by our company, unless otherwise specifically stated, will be free from defects in materials and workmanship for a period of 1 year from date of shipment. Such warranty shall not apply in any event to failure or defects in materials due to normal wear and tear, failure to perform recommended or customary maintenance procedures, exposure to detrimental elements, improper storage, or corrosion, and shall not extend to any person or entity other than the customer. To purchase an extra 3 years' warranty, please click here. Return: After shipment, product is returnable for a refund within 30 days of shipment, with a minimum 20% restocking fee. Lotos Technology reserves the right to charge a restocking fee higher than 20% based on the condition of products received. Original shipping and handling fee is not refundable. Feel free to contact us if you have any questions or comments. Useful information for LTPDC2000D: For Plasma Cutting The initial consumables are included in the package. However, you may need extra consumables/parts and metal wire guide for your project. We provide the following three packages for our customers- PCON40 PCON90 PCON150

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	LOTOS
Country/Region of Manufacture	China
Model	LTPDC2000D
Processes	Plasma, Stick, TIG