machine clamp for sale, brand-new and used.

VERY GOOD CONDITION! MACHINE NEVER SAW A CYCLE UNDER 60 SECONDS!! Machine under power for buyer testing.

Excellent all-electric injection molding machine with only approximately 18,000 hours on it. Brand-new screw and barrel. Floodwaters got into bottom case.

Nissei 1989 40T injection molding machine. 26MM Screw and barrel are 2 years old and it has a new screw motor. The only problem with the machine is the clamp will not close, the clamp will open.

Machine Details | Item No. 8754 Summary Specifications

1989 vertical newbury injection molding machine. The machine has been serviced and tested under power and is fully operational. A video of the press running can be viewed on youtube by typing newbury.Specs: Tonnage: 76

1989 300 Ton Van Dorn Injection molding machine with a 30 Oz injection capacityMachine is currently under power and can be viewed running at our warehouse in Hialeah FloridaMachine is in very good condition and fully operational. Specs:General Specs:Motor : 50 HpDimensions : 23 Ft long x 5.2 feet wide x 7.1 HighPump Capacity: 68 gpm ClampClamp Stroke: 24 InchesMax daylight : 49 I

Machine Details ~ Item 6732

McElroy's TracStar No.618 You are looking at a brand new McElroy TracStar No.618. This is not an older model machine (The machine is part of the newest line of McElroy's fusion equipment). The machine package includes the machine, heater, facer, heater stand, and lifting device.

Untitled Document

55" John Jacques Paper Box Machine/ Board, Paper, or Leather Shear w/55" Cut This is a hand operated John Jacques Paper Box Machine / sheer with 55" cut and a 59" table. It has a foot operated clamp to hold the product in place. This item cuts now but may need some blade adjustments.

This Juki 1942GA was purchased for a particular project that was never implemented. This is a hard to find, heavy duty computer controlled shape tacking machine. Pristine condition.

REDUCED... !!!! This machine has been set up to tack pleats in draperies and curtains.

I am not sure what this machine sews!!! Has a complicated anvil and curved needle comes in from the side The machine is partially stuck and I did not want to dissasemble it any more than removing covers and oiling the mechanism I feel a little coaxing will have this item running fine but its probably been in storage for fifty years!!! Has a small foot and a nut to clamp it to a table Weighs about 15 lbs and is about 12 x 12 x 8 inches I cannot find a name but the paint is good!!

SINGER 269 Pencil Line Tacker This machine is set up to sew pencil line tacks o