+ Post new Ad
Magnetic Transfer Blocks for Surface Grinder, US $270 – Picture 0
Magnetic Transfer Blocks for Surface Grinder, US $270 – Picture 1
Magnetic Transfer Blocks for Surface Grinder, US $270 – Picture 2
Magnetic Transfer Blocks for Surface Grinder, US $270 – Picture 0
Magnetic Transfer Blocks for Surface Grinder, US $270 – Picture 1
Magnetic Transfer Blocks for Surface Grinder, US $270 – Picture 2

Magnetic Transfer Blocks For Surface Grinder

US $270

  • Lititz, Pennsylvania, United States
  • Feb 15th
Open on mobile:
QR code
2 Magnetic Transfer Blocks for  Surface Grinder .These blocks transfer magnetism and are not magnetic themselves. Dimensions are 4 5/ 8x 2 x 1 If you would like additional pictures or have any questions just ask. My Father in-law was a tool and die maker, retired, moved to Florida and left me all his tools. I am actually a little overwhelmed. lots of tools, mics ,inserts ,cutters, gauges. Indicators . I will be listing as time allows so check back often or just email and ask with your needs  As for Payment if you can not pay within 48 hrs. of winning please just let me know

Directions

Similar products from Supporting Blocks & Sets

Starrett Offset #567 "V" Block With Clamp

Starrett Offset #567 "V" Block With Clamp

  • Cape Coral, Florida, United States
  • Feb 15th
VINTAGE MACHINIST BLOCK DATED 1921

VINTAGE MACHINIST BLOCK DATED 1921

  • Ballwin, Missouri, United States
  • Feb 15th
Norton surface grinder wheel norbide dressing stick

Norton surface grinder wheel norbide dressing stick

  • Grand Rapids, Michigan, United States
  • Feb 15th
Angle blocks

Angle blocks

  • Woodbridge, Connecticut, United States
  • Feb 15th
MAGNETIC CHUCK V BLOCKS AND PARALLEL BLOCKS 3 STARRETT PARALLELS For Grinder

MAGNETIC CHUCK V BLOCKS AND PARALLEL BLOCKS 3 STARRETT PARALLELS For Grinder

  • Lindenhurst, New York, United States
  • Feb 15th
STARRETT VINTAGE 54C HOLD-DOWNS W/BOX USA MACHINIST TOOLMAKER OTHER USA MADE

STARRETT VINTAGE 54C HOLD-DOWNS W/BOX USA MACHINIST TOOLMAKER OTHER USA MADE

  • Woodbury, New Jersey, United States
  • Feb 15th
4 assorted small blocks

4 assorted small blocks

  • North Branford, Connecticut, United States
  • Feb 15th
Hardened Tool maker Block work holding

Hardened Tool maker Block work holding

  • Lititz, Pennsylvania, United States
  • Feb 15th
Four inch V block

Four inch V block

  • Holly, Michigan, United States
  • Feb 15th
Starrett V Vee Block No. 568 w/ Clamp

Starrett V Vee Block No. 568 w/ Clamp

  • Charlestown, Indiana, United States
  • Feb 15th
NEW PAIR V BLOCKS / CLAMPS STARRETT 278 machinist tool tools grinding milling

NEW PAIR V BLOCKS / CLAMPS STARRETT 278 machinist tool tools grinding milling

  • British Columbia, Canada
  • Feb 15th
MACHINE SHOP MADE V BLOCK & CLAMP SET PRECISION

MACHINE SHOP MADE V BLOCK & CLAMP SET PRECISION

  • Macomb, Michigan, United States
  • Feb 15th
Fisher Machine Magnetic Chuck Parallels - One Pair Integrally Cast

Fisher Machine Magnetic Chuck Parallels - One Pair Integrally Cast

  • Charlestown, Indiana, United States
  • Feb 15th
2-1/2" V Bubble Level for Machining Work. Free USA Shipping!

2-1/2" V Bubble Level for Machining Work. Free USA Shipping!

  • Darien Center, New York, United States
  • Feb 15th
Machinist 1-2-3 Blocks And Parallels (One Set Of Each Matching Size's)

Machinist 1-2-3 Blocks And Parallels (One Set Of Each Matching Size's)

  • Wheatland, Pennsylvania, United States
  • Feb 15th
Lot of Enco Triangular Machinists Blocks 3568-41

Lot of Enco Triangular Machinists Blocks 3568-41

  • Hillsdale, New Jersey, United States
  • Feb 15th
Estate Vintage Machinist Vintage Brown & Sharpe No. 749 V Block and Clamp

Estate Vintage Machinist Vintage Brown & Sharpe No. 749 V Block and Clamp

  • Woonsocket, Rhode Island, United States
  • Feb 15th
2 Machinist V Blocks (No Clamps)

2 Machinist V Blocks (No Clamps)

  • Wheatland, Pennsylvania, United States
  • Feb 15th
SET OF 6" PRECISION PARALLELS 5/8"- 1-5/8" X 1/8" W/ CASE

SET OF 6" PRECISION PARALLELS 5/8"- 1-5/8" X 1/8" W/ CASE

  • Ellington, New York, United States
  • Feb 15th
NICE PAIR! TIN COATED 1 2 3 BLOCKS 123 TAPPED HOLES

NICE PAIR! TIN COATED 1 2 3 BLOCKS 123 TAPPED HOLES

  • Ellington, New York, United States
  • Feb 15th

People who viewed this item also vieved

Collet with Aluminum Pad

Collet with Aluminum Pad

  • Chino, California, United States
  • Mar 12th
USED 11/16 SOUTH BEND 5 COLLET FOR LATHE GRINDER MILL INDEX HEAD

USED 11/16 SOUTH BEND 5 COLLET FOR LATHE GRINDER MILL INDEX HEAD

  • Torrance, California, United States
  • Mar 12th
Plate HV Blank Index 20

Plate HV Blank Index 20

  • Waukegan, Illinois, United States
  • Mar 25th
Machinist Angle Plate 4"x4 1/2"x4"x7/8"/used/Ground & Harden

Machinist Angle Plate 4"x4 1/2"x4"x7/8"/used/Ground & Harden

  • Grand Rapids, Michigan, United States
  • May 4th
LATHE 5 " DIAM.FACE PLATE WITH 1 1/2"- 8 TPI =LOGAN,ATLAS,S.BEND,CRAFTSMAN

LATHE 5 " DIAM.FACE PLATE WITH 1 1/2"- 8 TPI =LOGAN,ATLAS,S.BEND,CRAFTSMAN

  • Eustis, Florida, United States
  • May 4th
Machinists Suburban Sine Plate In Box 12 x 6 x 2 5/8

Machinists Suburban Sine Plate In Box 12 x 6 x 2 5/8

  • Sterling Heights, Michigan, United States
  • May 5th
2 LOT ARMSTRONG Machinists 315 USA 2.5" Parallel Clamp Set ( ONE PAIR) CLAMPS

2 LOT ARMSTRONG Machinists 315 USA 2.5" Parallel Clamp Set ( ONE PAIR) CLAMPS

  • Minneapolis, Minnesota, United States
  • May 10th
VINTAGE HARGRAVE C.T.CO.STEEL RATCHET BAR CLAMP HEAVY DUTY

VINTAGE HARGRAVE C.T.CO.STEEL RATCHET BAR CLAMP HEAVY DUTY

  • Saint Paris, Ohio, United States
  • May 11th
2 SETS OF MACHINIST PARALLEL CLAMPS set up hold down work holder 2" & 2-7/8"

2 SETS OF MACHINIST PARALLEL CLAMPS set up hold down work holder 2" & 2-7/8"

  • Rushville, Indiana, United States
  • May 12th
6" 6 JAW SELF CENTERING SCROLL LATHE CHUCK GROUND WORKING SURFACES SUSTAINED

6" 6 JAW SELF CENTERING SCROLL LATHE CHUCK GROUND WORKING SURFACES SUSTAINED

  • DELHI, DELHI, India
  • May 24th
JACOBS RUBBER FLEX SPINDLE NOSE COLLET CHUCK 2-3/8" - 6 THREAD SOUTH BEND

JACOBS RUBBER FLEX SPINDLE NOSE COLLET CHUCK 2-3/8" - 6 THREAD SOUTH BEND

  • Cleveland, Ohio, United States
  • May 25th
C12 ER11A 150L Straight shank & ER11A wrench Collet Chuck toolholder CNC Lather

C12 ER11A 150L Straight shank & ER11A wrench Collet Chuck toolholder CNC Lather

  • Hong Kong, Hong Kong
  • May 25th
PARKER 63 1/2 BENCH VISE -PIPE JAWS-VINTAGE-EXCELLENT WORKING ORDER

PARKER 63 1/2 BENCH VISE -PIPE JAWS-VINTAGE-EXCELLENT WORKING ORDER

  • Saint Paul, Minnesota, United States
  • May 26th
Antique Vintage Prentiss 5" Jaw Machinist No. 54 Vise

Antique Vintage Prentiss 5" Jaw Machinist No. 54 Vise

  • Norcross, Georgia, United States
  • May 26th
Wilton Drill Press Press 6" Jaw Width 6 1/2" Clamp Width Bench Machinist Tool

Wilton Drill Press Press 6" Jaw Width 6 1/2" Clamp Width Bench Machinist Tool

  • Baton Rouge, Louisiana, United States
  • May 27th
ROYAL Value-Turn Live Center Point Length : 7/8'' Overall Length : 5-1/4''

ROYAL Value-Turn Live Center Point Length : 7/8'' Overall Length : 5-1/4''

  • Duncan, South Carolina, United States
  • May 24th
ROYAL Quad-Bearing Live Center Point Length : 1-1/16'' Overall Length : 6-7/16''

ROYAL Quad-Bearing Live Center Point Length : 1-1/16'' Overall Length : 6-7/16''

  • Duncan, South Carolina, United States
  • May 24th
ROYAL Value-Turn Live Center Point Length : 7/8'' Overall Length : 5-7/8''

ROYAL Value-Turn Live Center Point Length : 7/8'' Overall Length : 5-7/8''

  • Duncan, South Carolina, United States
  • May 24th
Ready Tool 113 Steel Grinder Dog 1 3/8" to 2" Capacity 113 (LOC2034B) TS6

Ready Tool 113 Steel Grinder Dog 1 3/8" to 2" Capacity 113 (LOC2034B) TS6

  • Laingsburg, Michigan, United States
  • May 31st
MOORE JIG BORER GRINDER PARALLEL SET 10" X 6" X 2-1/4"

MOORE JIG BORER GRINDER PARALLEL SET 10" X 6" X 2-1/4"

  • Highland, New York, United States
  • May 31st
Magna-Lock Vacuum Chuck Controller Unit, Used

Magna-Lock Vacuum Chuck Controller Unit, Used

  • Middlebury, Connecticut, United States
  • May 31st
Tsudakoma RN-150 R-2 Dual Head Rotary Indexer Table

Tsudakoma RN-150 R-2 Dual Head Rotary Indexer Table

  • Valley View, Pennsylvania, United States
  • Jun 4th
Weiss TC-700-T (B) Rotary Indexing Table (2011) w/Lenze-based PLC Control

Weiss TC-700-T (B) Rotary Indexing Table (2011) w/Lenze-based PLC Control

  • Santa Clara, California, United States
  • Jun 4th
large Indexing Dividing Head L-W Chuck Co. Toledo Ohio USA WITH CHUCK

large Indexing Dividing Head L-W Chuck Co. Toledo Ohio USA WITH CHUCK

  • Clermont, Georgia, United States
  • Jun 4th
DA200 COLLET CHUCK EXTENSION w/ 3/4" SHANK + 5 COLLETS

DA200 COLLET CHUCK EXTENSION w/ 3/4" SHANK + 5 COLLETS

  • Covina, California, United States
  • Jun 9th
S-20 CNC LATHE COLLET CHUCK HARDINGE S-20 MASTER COLLET, Used

S-20 CNC LATHE COLLET CHUCK HARDINGE S-20 MASTER COLLET, Used

  • West Babylon, New York, United States
  • Jun 9th
ETM ER40 Collet Chuck ST1.000X2.375 ER40 Holder

ETM ER40 Collet Chuck ST1.000X2.375 ER40 Holder

  • Mount Pleasant, South Carolina, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies