metal shaft for sale, brand-new and used.

Item description Insulated Shaft Potentiometer F-09KH11 L10.5T*7(K) B100K 20% OD:9 Q'TY:10PCS/LOT Introdution F09K Series Metal shaft Potentiometer Feature 1. Flux build prevention is taken insert

UP TO 4 NEW PACIFIC 1/2" ID OPEN SIMPLICITY PRECISION PILLOW BLOCKS PN08 This is for up to 4 Brand New in the Box, Pacific Precision Linear Simplicity 1/2" ID Open Bearing Pillow Blocks, No. PNO8. Each Bid is Block.

HEAVY DUTY PLANETARY GEARMOTOR 8,110* oz-in @ 12V 12 RPM @ 12V Dual Ball Bearings + Full Metal Gears!

175 RPM Large Gearhead Motor - 12V DC - High Torque - 6mm D Shaft New gearhead motor Operates on 4 – 12 VDC 175 RPM at 12V No load current at 12V: 80mA Stall current: 1,100 mA Speed is proportional with voltage (Speed range is 55 RPM @ 4V to 175 RPM @ 12V) Very high torque output, shaft is very difficult to stop by fingers even at just 6V D-Type Shaft dimensions: 27 mm Long x 6 mm Diameter Motor dimensions (not including shaft): 84 mm Long x 4

3 Step PULLEY 3/4" Shaft 4"

COUPLER - Four ( 4 ) new couplers for one price - ( Peleton 0639 ) will fit a 17MM keyed shaft - the keyway itself is 6MM - the coupling is 3 1/8 in. diameter overall - 1 3/4 in. of metal hub length that goes on the shaft that includes a 3/16 in.

Manufacturer unknown. Precision made 1/4" to 1/4" shaft coupler. Gre

COUPLER - 2 ( two ) new couplers for one price - ( Peleton 0639 ) will fit a 17MM keyed shaft - the keyway itself is 6MM - the coupling is 3 1/8 in. diameter overall - 1 3/4 in. of metal hub length that goes on the shaft that includes a 3/16 in.

Climax Metal 1C-243-Z One-Piece Clamping Collar, Zinc Plating, Steel, 2-7/16" This Climax Metal one-piece clamping shaft collar is made of zinc-plated steel. It is a one-piece clamping shaft collar for applications requiring a more uniform holding power and higher axial load capacity than setscrew collars. It is easier to remove and reposition than setscrew collars and is effective on both hard and soft shafts.

BOSTON GEAR SHAFT COUPLINGBG11-2-4-649900New In BagCoupling Size: BG11-2 Hub Bore 1/4" x 3/8" Hub Diameter: 3/4" Hub O.D.: 1"

You are bidding on a lot of two (2) New 3M Mounted Flap Wheels, 60 Grit x 2"Dia. with a 1/4" Dia. Shank.

2 each 2- flute USA carbide 7/32" end mill 1/4" shaft L342109 USA (( Location

James Nasmyth: An Autobiography, edited by Samuel Smiles, originally published by Harper & Brothers, new York, NY, 1884. Reprinted by Lindsay Publications, Bradley, Ill., 1989. 4 x 7 paperback, xviii + 461 pages.

How to Run a Lathe: How to Erect, Care for and Operate a Screw-Cutting Engine Lathe, For the Beginner, Revised Edition No. 19, by O’BRIEN BROTHERS J.J. O’Brien and M.W.

TAPERED ARBOR MANDREL - THREADED MANDREL SCREW THREAD - 1/4" SHAFT 6-PCS