Combines excellent performance with practically indestructible construction. The counter of choice where only the most durable can survive. Commonly used on construction equipment, concrete mixers, paving equipment, stokers, agricultural machinery, and other applications in extremely hostile environments.
175 RPM Large Gearhead Motor - 12V DC - High Torque - 6mm D Shaft New gearhead motor Operates on 4 – 12 VDC 175 RPM at 12V No load current at 12V: 80mA Stall current: 1,100 mA Speed is proportional with voltage (Speed range is 55 RPM @ 4V to 175 RPM @ 12V) Very high torque output, shaft is very difficult to stop by fingers even at just 6V D-Type Shaft dimensions: 27 mm Long x 6 mm Diameter Motor dimensions (not including shaft): 84 mm Long x 4
COUPLER - Four ( 4 ) new couplers for one price - ( Peleton 0639 ) will fit a 17MM keyed shaft - the keyway itself is 6MM - the coupling is 3 1/8 in. diameter overall - 1 3/4 in. of metal hub length that goes on the shaft that includes a 3/16 in.
COUPLER - 2 ( two ) new couplers for one price - ( Peleton 0639 ) will fit a 17MM keyed shaft - the keyway itself is 6MM - the coupling is 3 1/8 in. diameter overall - 1 3/4 in. of metal hub length that goes on the shaft that includes a 3/16 in.
Climax Metal 1C-243-Z One-Piece Clamping Collar, Zinc Plating, Steel, 2-7/16" This Climax Metal one-piece clamping shaft collar is made of zinc-plated steel. It is a one-piece clamping shaft collar for applications requiring a more uniform holding power and higher axial load capacity than setscrew collars. It is easier to remove and reposition than setscrew collars and is effective on both hard and soft shafts.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.