+ Post new Ad

Metals & Fusions

The average price for current category was $39.44 last month.

There are 3845 ads in this category.

0.5" x 1" x 0.5" Aluminium U Channel 6061 T651 x 48"-Long x 2.4 mm Thick

0.5" x 1" x 0.5" aluminium u channel 6061 t651 x 48"-long x 2.4 mm thick

  • Delhi, DELHI, India
  • May 28th
0.5" x 1" x 0.5" -6061 T6 ALUMINIUM ANGLE 2.4 mm THICK 48" Long 6061 Aluminium is the Most Robust out of all of the Aluminium. 6061 Aluminium possess good form-ability and corrosion resistance with a medium strength .Its most commonly used applications are for milling and tu
0.5" x 1" x 0.5" Aluminium U Channel 6061 T651 x 60"-Long x 2.4 mm Thick

0.5" x 1" x 0.5" aluminium u channel 6061 t651 x 60"-long x 2.4 mm thick

  • Delhi, DELHI, India
  • May 28th
0.5" x 1" x 0.5" -6061 T6 ALUMINIUM ANGLE 2.4 mm THICK 60" Long 6061 Aluminium is the Most Robust out of all of the Aluminium. 6061 Aluminium possess good form-ability and corrosion resistance with a medium strength .Its most commonly used applications are for milling and tu
0.5" x 1" x 0.5" Aluminium U Channel 6061 T651 x 72"-Long x 2.4 mm Thick

0.5" x 1" x 0.5" aluminium u channel 6061 t651 x 72"-long x 2.4 mm thick

  • Delhi, DELHI, India
  • May 28th
0.5" x 1" x 0.5" -6061 T6 ALUMINIUM ANGLE 2.4 mm THICK 72" Long 6061 Aluminium is the Most Robust out of all of the Aluminium. 6061 Aluminium possess good form-ability and corrosion resistance with a medium strength .Its most commonly used applications are for milling and tu
0.5" x 1" x 0.5" Aluminium U Channel 6061 T651 x 84"-Long x 2.4 mm Thick

0.5" x 1" x 0.5" aluminium u channel 6061 t651 x 84"-long x 2.4 mm thick

  • Delhi, DELHI, India
  • May 28th
0.5" x 1" x 0.5" -6061 T6 ALUMINIUM ANGLE 2.4 mm THICK 84" Long 6061 Aluminium is the Most Robust out of all of the Aluminium. 6061 Aluminium possess good form-ability and corrosion resistance with a medium strength .Its most commonly used applications are for milling and tu
Kovar Fine Wire 1.00mm/0.04" Dimater ASTM F15 GOST 10994 29HK-BN

Kovar fine wire 1.00mm/0.04" dimater astm f15 gost 10994 29hk-bn

  • ISTANBUL, TURKEY, Turkey
  • May 28th
Kovar (aka ASTM F-15, Pernifer 2918, Dilvar P1 and NILO K) (0.50mm/0.02") Dimater x (1 meters/3.3ft) Length
Round CR1018 Steel Bar 1/2" Dia x 12" Long - 50 Pieces

Round cr1018 steel bar 1/2" dia x 12" long - 50 pieces

  • Lakeside-Marblehead, Ohio, United States
  • May 28th
You are bidding on 50 Pc. lot of Cold Roll Finish CR1018 Steel Pins 1/2 inch in diameter by 12 inches long. I used them pin my stone wall after drilling holes with my Hilti Drill thru three layers at a time.
Solid Brass Bar Stock Cylinder Scrap Metal Material 6 LBS Rod Lathe

Solid brass bar stock cylinder scrap metal material 6 lbs rod lathe

  • Aberdeen, Washington, United States
  • May 28th
EXCELLENT BRASS PIECE, 6 LBS, $6 SHIP USA
1 1/4 X 3 X 6" ALUMINUM 6061 FLAT BAR T6" 1.250" Thick Plate New Mill Stock

1 1/4 x 3 x 6" aluminum 6061 flat bar t6" 1.250" thick plate new mill stock

  • Long Beach, California, United States
  • May 28th
Product Features Processing: Excellent Machinability, Weldability, and High Strength. Welding: 6061 can be readily welded using all the common welding techniques. Forging: 6061 can be forged at temperatures in the range of 750°F to 900°F.
D 8" ALUMINUM 6061 ROUND ROD 1.8" LONG T6511 8.0" Diameter Solid Lathe Bar Stock

D 8" aluminum 6061 round rod 1.8" long t6511 8.0" diameter solid lathe bar stock

  • Colorado Springs, Colorado, United States
  • May 28th
You are buying 1 piece of 8.00" Diameter 6061 T6511 Aluminum Solid Round Rod 1.80" long -0/+.07" . Cut new. CHECK MY STORE FOR MORE SELECTIONS!
D 8" ALUMINUM 6061 ROUND ROD 1.45" LONG T6511 8.0" OD Solid Lathe Bar Stock

D 8" aluminum 6061 round rod 1.45" long t6511 8.0" od solid lathe bar stock

  • Colorado Springs, Colorado, United States
  • May 28th
You are buying 1 piece of 8.00" Diameter 6061 T6511 Aluminum Solid Round Rod 1.45" long -0/+.07" . Cut new. CHECK MY STORE FOR MORE SELECTIONS!
D 8" ALUMINUM 6061 ROUND ROD 2.31" LONG T6511 8.0" OD Solid Lathe Bar Stock

D 8" aluminum 6061 round rod 2.31" long t6511 8.0" od solid lathe bar stock

  • Colorado Springs, Colorado, United States
  • May 28th
You are buying 1 piece of 8.00" Diameter 6061 T6511 Aluminum Solid Round Rod 2.31" long -0/+.1" . Cut new. CHECK MY STORE FOR MORE SELECTIONS!
.030" Indium corporation wire Indalloy #1 50% indium & 50% tin solder 37 grams

.030" indium corporation wire indalloy #1 50% indium & 50% tin solder 37 grams

  • Portland, Oregon, United States
  • May 28th
This is 37 grams of .030" indalloy #1. 50 percent tin 50 percent indium. Comes in two pieces.
4-1/4" ALUMINUM 6061 ROUND ROD 5-3/8" LONG SOLID T6511 Lathe Bar Stock 4.25" OD

4-1/4" aluminum 6061 round rod 5-3/8" long solid t6511 lathe bar stock 4.25" od

  • Colorado Springs, Colorado, United States
  • May 28th
You are buying 1 piece of 4.250" Diameter 6061 T6511 Aluminum Solid Round Rod 5-3/8" long +.07"/-0. Cut new. CHECK MY STORE FOR MORE SELECTIONS!
D 7" ALUMINUM 6061 ROUND ROD 2.36" LONG T6511 7.00" OD Solid Lathe Bar Stock

D 7" aluminum 6061 round rod 2.36" long t6511 7.00" od solid lathe bar stock

  • Colorado Springs, Colorado, United States
  • May 28th
This item is mechanized with eBay Turbo Lister which allows for easy listing and management of our active items. All of our items are currently in stock and ready to ship. For international buyers, please note that the maximum combined weight is 20 lbs.
6-1/4" ALUMINUM 6061 ROUND ROD 4-3/8" LONG T6511 6.25" OD Solid Lathe Bar Stock

6-1/4" aluminum 6061 round rod 4-3/8" long t6511 6.25" od solid lathe bar stock

  • Colorado Springs, Colorado, United States
  • May 28th
You are buying 1 piece of 6-1/4" OD 6061 T6511 Aluminum Solid Round Rod 4-3/8" long +.07"/-0. Cut new. CHECK MY STORE FOR MORE SELECTIONS!
6-1/4" ALUMINUM 6061 ROUND ROD 4" LONG T6511 6.25" OD Solid Lathe Bar Stock

6-1/4" aluminum 6061 round rod 4" long t6511 6.25" od solid lathe bar stock

  • Colorado Springs, Colorado, United States
  • May 28th
You are buying 1 piece of 6-1/4" OD 6061 T6511 Aluminum Solid Round Rod 4" long +.07"/-0. Cut new. CHECK MY STORE FOR MORE SELECTIONS!
D 6-1/2" ALUMINUM 6061 ROUND ROD 4.4" LONG T6511 6.5" OD Solid Lathe Bar Stock

D 6-1/2" aluminum 6061 round rod 4.4" long t6511 6.5" od solid lathe bar stock

  • Colorado Springs, Colorado, United States
  • May 28th
You are buying 1 piece of 6-1/2" OD 6061 T6511 Aluminum Solid Round Rod 4.4" long +.1"/-0. Cut new. CHECK MY STORE FOR MORE SELECTIONS!
2" x 4-1/2" x .060 Aluminum Sheets - 310 pcs.

2" x 4-1/2" x .060 aluminum sheets - 310 pcs.

  • La Quinta, California, United States
  • May 28th
310 pieces of .060 bright aluminum sheet sheared to 2" x 4 -1/2"
D 5-1/2" ALUMINUM 6061 ROUND ROD 5-7/8" LONG T6511 Solid Lathe Bar Stock

D 5-1/2" aluminum 6061 round rod 5-7/8" long t6511 solid lathe bar stock

  • Colorado Springs, Colorado, United States
  • May 28th
You are buying 1 piece of 5.50" OD 6061 T6511 Aluminum Solid Round Rod 5-7/8" long +.07"/-0" Cut new. CHECK MY STORE FOR MORE SELECTIONS! THAT ARE NOT LISTED IN THE REGULAR EBAY .(
660 Bronze Round Rod, Unpolished (Mill) Finish, Cast Temper, ASTM B584-78/SAE CA

660 bronze round rod, unpolished (mill) finish, cast temper, astm b584-78/sae ca

  • Franklin, Tennessee, United States
  • May 28th
payment | shipping rates | returns 660 Bronze Round Rod, Unpolished (Mill) Finish, Cast Temper, ASTM B584-78/SAE CA932, 1.5" Diameter, 13" Length Product Category : Miscellaneous UPC : 781711334607 Title : 660 Bronze Round Rod, Unpo

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies