milling inserts for sale, brand-new and used.

PRAMET SPU 845 S 8026T milling inserts (ISO: SPUN 250620 S 8026T) The listing is for 10 packs = 100 pcs. = 'FACTORY PACK' grade 8026T (HC) – P30 (P20 – P40), (M20 - M30) (K20 - K35) - PVD coated carbide grade: - Substrate with high content of cubical carbides; - Nanostructural coating applied by PVD method; - Suitable for machining of materials groups P,M, conditionally for K; - Medium and higher feed. - Medium up to high cutting speed.

ISCAR TPKN 2204PDTR-42 IC50M milling inserts (TPK 432 / TPK 433) This listing is for 5 packs = 50 pcs.: 'FACTORY PACK' 'TPKN 2204PDTR-42' - general use milling inserts. The -42 has improved tool life. grade IC50M - uncoat

SANDVIK MB-07TH100MM-10L 1025 inserts / solid carbide heads for thread turning The listing is for 2 packs = 10 pcs. (5 in box): 'FACTORY PACK' dimensions: thread form type = M60 thread pitch = 1.00 mm

SANDVIK R790-16 04 20PH-NM H13A milling inserts - Coromill 790 The listing is for 5 packs = 50 pcs.

SANDVIK R590-1105H-PC5-NL CD10 diamond tipped inserts for milling non-ferrous material The listing is for 1 pack = 5 pcs.: 'FACTORY PACK' Coromill Century series 'PC' corner geometry - for highest security dimensions: 11 x 11.5 mm, 1x45°, tip 1.5 x 5 mm

SANDVIK RCKT 16 06 M0-WM 235 milling inserts (Coromill 200) The listing is for 5 packs = 50 pcs. grade 235 (HC) – M40, P45 - GC235 has a very tough substrate, which provides and extremely good edge scurity. It is coated with a 2.5 ?m CVD TiC-TiCN-TiC for added wear resistance and lower friction.

SANDVIK MB-07TH100MM-10R 1025 inserts / solid carbide heads for thread turning The listing is for 2 packs = 10 pcs. (5 in box): 'FACTORY PACK' dimensions: thread form type = M60 thread pitch = 1.00 mm

ISCAR TPKN 2204PDTR-42 IC50M milling inserts (TPK 432 / TPK 433) This listing is for 10 packs = 100 pcs.: 'FACTORY PACK' 'TPKN 2204PDTR-42' - general use milling inserts. The -42 has improved tool life. grade IC50M - unco

SANDVIK MB-07G200-00-12L 1025 inserts / solid carbide heads for grooving The listing is for 2 packs = 10 pcs. (5 in box): 'FACTORY PACK' dimensions: functional length, min / max overhang = 3.9 mm; functional width = 7.

PRAMET SPU 845 S 8026T milling inserts (ISO: SPUN 250620 S 8026T) The listing is for 5 packs = 50 pcs. = 'FACTORY PACK' grade 8026T (HC) – P30 (P20 – P40), (M20 - M30) (K20 - K35) - PVD coated carbide grade: - Substrate with high content of cubical carbides; - Nanostructural coating applied by PVD method; - Suitable for machining of materials groups P,M, conditionally for K; - Medium and higher feed. - Medium up to high cutting speed.

NEW WORLD PRODUCTS BRAND TPK43P2R 10 PIECES BRAND NEW MILLING CARBIDE INSERTS C5 UNCOATED GRADE: MP4 MP4 GRADE: UNIVERSAL GRADE FOR USE IN ROUGHING MILLING UNDER EXTREMELY DIFFICULT CONDITIONS, USE LOW SPEEDS AND HEAVY FEEDS. GOOD FOR INTERRUPTED CUTS. WE CAR

Manufacturer: KENNAMETAL Grade name: KC725M Insert material: CARBIDE - PVD COATED ISO range: (chart) P30-40 M30-40 S30-40 ANSI range: C5-C7 Coating: TiAlN Description: 'Coated carbide grade with an advanced PVD TiAlN coating. KC725M is a high-performance grade for milling steel, stainless steel, and ductile cast iron. The good thermal shock resistance of the substrate makes this grade ideal for both wet and dry machining.

Ceratizit Shoulder and Slot Milling Cutter A490.80.R.09-09 (NEW IN BOX) WITH CUTTING INSERTS

7 SANDVIK CARBIDE MILLING INSERTS R390-11 T3 08M-PL 1025

ISCAR S845 SNMU 1305ANR-MM IC830 milling inserts This listing is for 4 packs = 40 pcs.: 'FACTORY PACK' 'S845 SNMU' - HELIDO, square, thick inserts with 8 helical right-hand cutting edges, prowiding a very economical

SANDVIK R390-18 06 12M-PMR 4240 milling inserts The listing is for 6 packs = 60 pcs. - 'FACTORY PACK' grade 4240 (HC) – P40 (P35 – P50) - Tough coated carbide grade for demanding operations in steel milling. For end mill and square shoulder concepts, grade GC4240 should be used in more stable conditions, such as short overhangs, face milling, shallow shoulder milling, etc.

NEW WORLD PRODUCTS BRAND TNMG432-AA 10 PIECES BRAND NEW TURNING CARBIDE INSERTS C2 UNCOATED GRADE: MK2 CHIPBREAKER: AA (GENERAL PURPOSE) MK2 GRADE: STURDY UNCOATED GRADE FOR TURNING GREY CAST IRON AND TITANIUM ALLOYS AT MEDIUM SPEEDS AND FEEDS, ESPECIALLY UNDER UNFAVORABLE CONDITIONS, WITH HEAVY INTERRUPTIONS. ALSO A CONSISTENT GRAD

NEW WORLD PRODUCTS BRAND WNMG331-PC 10 PIECES BRAND NEW TURNING CARBIDE INSERTS C2 UNCOATED GRADE: MK2 CHIPBREAKER: PC (LIGHT TO MEDIUM ROUGHING) < OFFERS A WIDE RANGE OF APPLICATIONS FOR GENERAL PURPOSE> MK2 GRADE: STURDY UNCOATED GRADE FOR TURNING GREY CAST IRON AND TITANIUM ALLOYS AT MEDIUM SPEEDS AND FEEDS, ESPECIALLY UNDE

NEW WORLD PRODUCTS BRAND TNMG332-PD 10 PIECES BRAND NEW TURNING CARBIDE INSERTS C2 UNCOATED GRADE: MK2 CHIPBREAKER: PD (LIGHT TO MEDIUM ROUGHING) < OFFERS A WIDE RANGE OF APPLICATIONS FOR GENERAL PURPOSE> MK2 GRADE: STURDY UNCOATED GRADE FOR TURNING GREY CAST IRON AND TITANIUM ALLOYS AT MEDIUM SPEEDS AND FEEDS, ESPECIALLY UNDE