Molds, Forms & Ejection Pins (Plastic Processing Tools & Expendables) for sale, page 20

Rodney, Michigan, United States
Jan 30th

DME Ejector PinsEX17 1/4

Hialeah, Florida, United States
Jan 30th

Serial Number 65-079 Volts 60 Pump Motor 50 HP 15 KVA Ton 40 includes 2 molds 1 cap mold and 1 Small Bottle mold Mold Size: 15 x 24 x 17" Cavities: 18 Runner: Cold Product Size:

12kw oil type mold temperature controller machine plastic/chemical industry us1

CN,CN, China
Jan 30th

Injection mold-core pin-ejector pin lot

Cassopolis, Michigan, United States
Jan 30th

There is around 150 ejector pins and core pins included in this lot. The majority of them are under 1/4 in diameter but there are a few over 1/4 diameter. The total lot weight is 2 pounds 10 ounces.

Shafts for 65mm maris twinscrew extruder

Greensboro, Maryland, United States
Jan 30th

( NEW) SPLINED SHAFTS FOR 65MM MARIS TWINSCREW EXTRUDER WITH CHROME SCREW TIPS. 2454MM TOTAL LENGHT,2269MM TOTAL PROCESS LENGHT, SPLINE LENGHT 2255MM. THEY SELL NEW FOR ABOUT 10K BUYER PAYES FREIGHT

Astm b specimen mold

Evansville, Indiana, United States
Jan 30th

ASTM B Specimen Mold, Standard Base. Used for very short project. Is in perfect condition!

Injection mold bronze plated gibs

Fort Wayne, Indiana, United States
Jan 30th

I HAVE FOR SALE 8 - GIBS THEY ARE BRONZE PLATED IN 3 AREAS (CHECK PICTURES) I MADE A PRINT OF THE DIMENSIONS IN ONE PICTURE. I USED CALIPERS TO CHECK COULD BE OFF A FEW THOUSANDS. THEY SHOULD BE A STANDARD SIZE IN A CATALOG.

Cloeron 20" wide extrusion sheet die (11) temp. zones

Bristol, Pennsylvania, United States
Jan 30th

Cloeron 22" wide epoch iv 3-layer extrusion sheet die

Bristol, Pennsylvania, United States
Jan 30th

Ball-bearing rotainer for 2.5” post (8.75” long) od = 3

Albion, New York, United States
Jan 30th

Ball-Bearing Rotainer for 2.5” dia. Post (8.75” l)(a) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 2.5” Post (8.75” long) OD = 3 inches Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking. The disengagement of the guide post from the bushing by 1/4" at the top of the stroke will allow the ROTAINER® to rotate 360° on the guide post.

Ball-bearing rotainer for 2” dia. post (7.5” long) (c)

Albion, New York, United States
Jan 30th

Ball-Bearing Rotainer for 2” dia. Post (7.5” long) (c) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 2” Post (7.5” long) OD = 2.5 inches DANLY Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking. The disengagement of the guide post from the bushing by 1/4" at the top of the stroke will allow the ROTAINER® to rotate 360° on the guide post.

Ball-bearing rotainer for 2” dia. post (5.5” long) (d)

Albion, New York, United States
Jan 30th

Ball-Bearing Rotainer for 2” dia. Post (5.5” long) (d) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 2” Post (5.5” long) OD = 2.5 inches READY 1429294/6-1623-822 Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking. The disengagement of the guide post from the bushing by 1/4" at the top of the stroke will allow the ROTAINER® to rotate 360° on the guide post.

Ball-bearing rotainer for 2” dia. post (5.5” long) (e)

Albion, New York, United States
Jan 30th

Ball-Bearing Rotainer for 2” dia. Post (5.5” long) (e) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 2” Post (5.5” long) OD = 2.5 inches DANLY Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking. The disengagement of the guide post from the bushing by 1/4" at the top of the stroke will allow the ROTAINER® to rotate 360° on the guide post.

Ball-bearing rotainer for 2” dia. post (5.25” long)(f)

Albion, New York, United States
Jan 30th

Ball-Bearing Rotainer for 2” dia. Post (5.25” long)(f) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 2” Post (5.25” long) OD = 2.5 inches DANLY 6-1621-822 Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking. The disengagement of the guide post from the bushing by 1/4" at the top of the stroke will allow the ROTAINER® to rotate 360° on the guide post.

Ball-bearing rotainer 1 3/4” dia. post (5.25” long)(g)

Albion, New York, United States
Jan 30th

Ball-Bearing Rotainer for 1 3/4” dia. Post (5.25” long)(g) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 1 3/4” Post (5.25” long) OD = 2 inches DANLY Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking. The disengagement of the guide post from the bushing by 1/4" at the top of the stroke will allow the ROTAINER® to rotate 360° on the guide post.

Ball-bearing rotainer for 2.5” dia. post(4.5” long)(h)

Albion, New York, United States
Jan 30th

Ball-Bearing Rotainer for 2.5” dia. Post(4.5” long)(h) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 2.5” Post (4.5” long) OD = 3 inches LAMINA AR1-2018 Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking. The disengagement of the guide post from the bushing by 1/4" at the top of the stroke will allow the ROTAINER® to rotate 360° on the guide post.

Ball-bearing rotainer for 1 3/4” post(4 3/4” long)(j)

Albion, New York, United States
Jan 30th

Ball-Bearing Rotainer for 1 3/4” Post(4 3/4” long)(J) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 1 3/4” dia. Post (4 3/4” long) OD = 2 1/8 inches DANLY Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking. The disengagement of the guide post from the bushing by 1/4" at the top of the stroke will allow the ROTAINER® to rotate 360° on the guide post.

Ball-bearing rotainer for 1.75” post (4.25” long)(m)

Albion, New York, United States
Jan 30th

Ball-Bearing Rotainer for 1.75” dia. Post(4.25” long)(m) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 1.75” dia. Post (4.25” long) OD = 2 1/8 PRODUCTO PREC A13-1417 Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking.

Ball-bearing rotainer for 1.5” dia. post(3.75” long)(n)

Albion, New York, United States
Jan 30th

Ball-Bearing Rotainer for 1.5” dia. Post(3.75” long)(n) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 1.5” dia. Post (3.75” long) OD = 1 7/8 PRODUCTO PREC A13-1215 Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking.

Ball-bearing rotainer for 1.5” dia. post(3.75” long)(o)

Albion, New York, United States
Jan 30th

Ball-Bearing Rotainer for 1.5” dia. Post(3.75” long)(o) > Satisfaction guaranteed or your money back This auction is for: ONE Ball-Bearing Rotainer for 1.5” dia. Post (3.75” long) OD = 1 7/8 PRODUCTO PREC A13-1215 Designed to rotate on the post, as well as maintain its vertical motion, The ROTAINER® was developed to greatly reduce the amount of tracking.