Molds, Forms & Ejection Pins (Plastic Processing Tools & Expendables) for sale, page 22

Dme accelerated ejector new d-m-e,mold,die part aep-20 pin type

Maumee, Ohio, United States
Jan 30th

This is for a new DME or D-M-E accelerated ejector unit ,New old stock in the factory boxes.This listing is for the Model AEP 20 Pin type. This is the larger of 2 sizes they offer. Buyer pays for all shipping costs.

Pcs company new mold locks pa-150,dme type

Maumee, Ohio, United States
Jan 30th

This is a new in the package matched set of mold locks.each set has a top and bottom and 4 mounting screws.Very similar to the DME products. The packages are a bit dirty but the locks are in excellant new condition. Catalog number: PA-150 Side Locks 1/2" thick x 1 1/2" wide x 1 3/4" overall height.

Dme accelerated ejector new d-m-e,mold,die part aep-10 pin type

Maumee, Ohio, United States
Jan 30th

This is for a new DME or D-M-E accelerated ejector unit ,New old stock in the factory boxes.This listing is for the Model AEP 10 Pin type. This is the smaller of 2 sizes they offer. I also have 2 other sizes listed.

Advantage negative pressure unit, "logic seal" model: tr-300

Scottsburg, Indiana, United States
Jan 30th

Silicone mold release, 16 oz, 3 can lot

East Brunswick, New Jersey, United States
Jan 30th

COOL PRODUCTS AT GREAT PRICES ... The Region's #1 Wholesale distributor of Electronic Accessories and Hardware products

Early cast iron dragon foo dog rubber toy injection mold base attachment

New York, New York, United States
Jan 30th

Schumag nitrided ejector pins (1/4 x 8" x 7/16 x 3/16)

Schaumburg, Illinois, United States
Jan 30th

SCHUMAG manufactures the highest quality Ejector Pins in the world. The Pins are gas nitrided between .003" + .005" deep, then ground and lapped to a finish of 1 micron inch (.00002). For more than 80 Years they have been producing high-quality ground precision components.

60 hole strand die with heaters

Elk Grove Village, Illinois, United States
Jan 30th

Mokon leak master negative pressure unit, model np4000-01 "logic seal" 1/2 hp

Scottsburg, Indiana, United States
Jan 30th

Mokon leak master negative pressure unit, model np4001-01 "logic seal" 1 hp

Scottsburg, Indiana, United States
Jan 30th

Series 200 brass quick connect couplers (push-lok) - packages of 50 pcs.

Shrewsbury, Massachusetts, United States
Jan 30th

200 series brass quick connect couplers with 3/8” Push-Lok 90 degree hose barb (NEW NEVER USED), Jiffy-Tite, Parker Mold Mate compatible, Quick connect couplers specially designed for connecting coolant lines to molds and dies on plastic molding machinery. These are full flow connectors that connect to 200 series male brass plugs. The S-216PL barb and coupler are oriented at a 90 degree angle from each other and should be used with a Push-Lok hose ID of 3/8’’.

Series 300 brass quick connect coupler (push-lok) - packages of 50 pcs.

Shrewsbury, Massachusetts, United States
Jan 30th

300 series brass quick connect couplers with 1/2” Push-Lok 45 degree hose barb (NEW NEVER USED), Jiffy-Tite, Parker Mold Mate compatible, Quick connect couplers specially designed for connecting coolant lines to molds and dies on plastic molding machinery. These are full flow connectors that connect to 300 series male brass plugs. The S-328PL barb and coupler are oriented at a 45 degree angle from each other and should be used with a Push-Lok hose ID of 1/2’’.

Series 200 quick connect couplers (push-lok)(45 degrees) - packages of 50 pcs.

Shrewsbury, Massachusetts, United States
Jan 30th

200 series brass quick connect couplers with 3/8” Push-Lok 45 degree hose barb (NEW NEVER USED), Jiffy-Tite, Parker Mold Mate compatible, Quick connect couplers specially designed for connecting coolant lines to molds and dies on plastic molding machinery. These are full flow connectors that connect to 200 series male brass plugs. The S-226PL barb and coupler are oriented at a 45 degree angle from each other and should be used with a Push-Lok hose ID of 3/8’’.

Series 300 quick connect couplers 1/2" 90 deg push-lok (pkg of 50 pcs)

Shrewsbury, Massachusetts, United States
Jan 30th

300 series brass quick connect couplers with 1/2” Push-Lok 90 degree hose barb (NEW NEVER USED), Jiffy-Tite, Parker Mold Mate compatible, Quick connect couplers specially designed for connecting coolant lines to molds and dies on plastic molding machinery. These are full flow connectors that connect to 300 series male brass plugs. The S-318PL barb and coupler are oriented at a 90 degree angle from each other and should be used with a Push-Lok hose ID of 1/2’’.

Series 500 quick connect couplers (push-lok)(90 degrees) - package of 13 pcs.

Shrewsbury, Massachusetts, United States
Jan 30th

500 series brass quick connect couplers with 3/4” Push-Lok 90 degree hose barb (NEW NEVER USED), Jiffy-Tite, Parker Mold Mate compatible, Quick connect couplers specially designed for connecting coolant lines to molds and dies on plastic molding machinery. These are full flow connectors that connect to 500 series male brass plugs. The S-516PL barb and coupler are oriented at a 90 degree angle from each other and should be used with a Push-Lok hose ID of 3/4’’.

Series 500 quick connect couplers (push-lok) - packages of 10 pcs.

Shrewsbury, Massachusetts, United States
Jan 30th

500 series brass quick connect couplers with 3/4” Push-Lok straight hose barb (NEW NEVER USED), Jiffy-Tite, Parker Mold Mate compatible, Quick connect couplers specially designed for connecting coolant lines to molds and dies on plastic molding machinery. These are full flow connectors that connect to 500 series male brass plugs. The S-506PL barb and coupler are oriented straight through and should be used with a Push-Lok hose ID of 3/4’’.

Series 200 quick connect couplers 3/8" (push-lok) - pkg of 50 pcs

Shrewsbury, Massachusetts, United States
Jan 30th

200 series brass quick connect couplers with 3/8” Push-Lok straight hose barb (NEW NEVER USED), Jiffy-Tite, Parker Mold Mate compatible, Quick connect couplers specially designed for connecting coolant lines to molds and dies on plastic molding machinery. These are full flow connectors that connect to 200 series male brass plugs. The S-206PL barb and coupler are oriented straight through and should be used with a Push-Lok hose ID of 3/8’’.

200 series quick couplers, 1/4” standard straight hose barb - packages of 25 pcs

Shrewsbury, Massachusetts, United States
Jan 30th

M-204: 200 series brass quick connect couplers with 1/4” standard straight hose barb (NEW NEVER USED), Jiffy-Tite, Parker Mold Mate compatible, Quick connect couplers specially designed for connecting coolant lines to molds and dies on plastic molding machinery. These are full flow connectors that connect to 200 series male brass plugs.

200 series quick couplers, 3/8” standard 90 deg hose barb - packages of 50 pcs.

Shrewsbury, Massachusetts, United States
Jan 30th

M-216: 200 series brass quick connect couplers with 3/8” standard 90 degree hose barb (NEW NEVER USED), Jiffy-Tite, Parker Mold Mate compatible, Quick connect couplers specially designed for connecting coolant lines to molds and dies on plastic molding machinery. These are full flow connectors that connect to 200 series male brass plugs.

200 series quick connect plugs 1/8" npt 1/4" plug id - package of 50 pcs.

Shrewsbury, Massachusetts, United States
Jan 30th

M-251 FS: 200 series plated steel quick connect male plugs with 1/8’’ (NPT) thread and 1/4 ’’ plug ID. Fits any 200 series couplers; Jiffy-Tite and Parker Mold Mate compatible. Quick connect plugs specially designed for connecting coolant lines to molds and dies on plastic molding machinery.